Delta 50-851 - Manuals

5 Fig. 4 Fig. 5 Fig. 6 Fig. 7 ASSEMBLING CASTERASSEMBLIES TO BASE 1. Align the holes in swivel caster assembly (A) Fig. 4, with four holes in caster bracket (B) located on theunderside of base (C). Place a 5/16" lockwasher (E) Fig.4 onto a 5/16-18x5/8" hex head screw (D), then place a5/16...

10 Fig. 25 3. Three dust intake port caps (D) Fig. 25, are supplied with the dust collector. NOTE: These caps should be inserted into the intake ports as shown, when they arenot in use. WARNING: DO NOT INSERT FINGERS OR ANY FOREIGN OBJECT INTO THE DUST INTAKEPORTS WHEN UNIT IS OPERATING. CONNECTING ...

11 OPERATING CONTROLS ON/OFF SWITCH The “on/off” switch is located on the side of the motor.To turn the dust collector “ON”, push the start button(A) Fig. 27. To turn the dust collector “OFF”, push stopbutton (B). Fig. 27 MAINTENANCE WARNING: Before any maintenance or service is performed, be sure t...

The following are trademarks of PORTER-CABLE·DELTA (Las siguientes son marcas registradas de PORTER-CABLE S.A.): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’s Saw ® , Contractor’s Saw ® , Contractor’s Saw II™, Delta ® , DELTACRAFT ® , DELTAGRAM™, Delta Series 2000™, DURATRONIC™, Emc²™, FLEX ® , Fly...