Delta 50-850 - Manuals - manualsarea.com

Page 2 - GENERAL SAFETY RULES

2 GENERAL SAFETY RULES Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain hazards involved with the operation of the product. Using the machine with respect and caution willconsiderably lessen the possibility of personal inj...

Page 3 - SAVE THESE INSTRUCTIONS.

3 ADDITIONAL SAFETY RULES FOR DUST COLLECTORS WARNING: FAILURE TO FOLLOW THESE RULES MAY RESULT IN SERIOUS PERSONAL INJURY. 1. DO NOT OPERATE THIS MACHINE until it is assembled and installed according to the instructions. 2. OBTAIN ADVICE FROM YOUR SUPERVISOR, instructor, or another qualified person...

Page 4 - UNPACKING AND CLEANING

4 UNPACKING AND CLEANING Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from allunpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasolineor lacquer thinner for this purpose). Af...

Page 5 - ASSEMBLY

5 ASSEMBLY Fig. 4 Fig. 5 Fig. 6 Fig. 8 Fig. 7 ASSEMBLINGCASTERS TO BASE 1. Insert threaded rod of caster (A) Fig. 4, into the hole located on the underside of base (B) and fasten with3/8" lockwasher (C) and 3/8-16 hex nut (D). Fig. 5,illustrates the caster fastened to the base. 2. Assemble the r...

Page 9 - CONNECTING TOOL TO POWER SOURCE; POWER CONNECTIONS

9 Fig. 23 ASSEMBLING DUST INTAKEHOSES TO BLOWER ANDMOTOR ASSEMBLY KEEP DUST CAPS INSTALLED AT ALL TIMES OVERINTAKE PORTS. REMOVE A DUST CAP ONLY WHENA FLEXIBLE HOSE IS ATTACHED TO THE INTAKEPORT. The dust collector is supplied with a 4" dia. flexible dustintake hose. 1. To assemble the intake ho...

Page 10 - EXTENSION CORDS

10 Use proper extension cords. Make sure your extensioncord is in good condition and is a 3-wire extension cordwhich has a 3-prong grounding type plug and a 3-holereceptacle which will accept the tool’s plug. When usingan extension cord, be sure to use one heavy enough tocarry the current of the too...

Page 11 - OPERATING CONTROLS; CIRCUIT BREAKER; MOTOR MAINTENANCE

11 OPERATING CONTROLS WARNING: BEFORE OPERATING THE MACHINE, FOR OPERATOR SAFETY, ALWAYS MAKE CERTAIN THAT EACH DUST INTAKE PORT (WHICH IS NOT BEING USED OR PREVIOUSLY ASSEMBLED TO A DUST COLLECTIONSYSTEM) BE COVERED WITH A DUST INTAKE PORT CAP. THE ROTATING FAN INSIDE THE BLOWER HOUSING ISACCESSIBL...

Page 12 - Two Year Limited Warranty; PARTS, SERVICE OR WARRANTY ASSISTANCE

12 Two Year Limited Warranty Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, or machine accessory whichin normal use has proven to be defective in workmanship or material, provided that the customer returns the productprepaid to a Delta factory servic...

Page 13 - DELTA SERVICE CENTERS; CANADIAN PORTER-CABLE

The following are trademarks of PORTER-CABLE·DELTA (Las siguientes son marcas registradas de PORTER-CABLE S.A.): Auto-Set ® , BAMMER ® , B.O.S.S. ® , Builder’s Saw ® , Contractor’s Saw ® , Contractor’s Saw II™, Delta ® , DELTACRAFT ® , DELTAGRAM™, Delta Series 2000™, DURATRONIC™, Emc²™, FLEX ® , Fly...