Delta 23-665 - Manuals

5 HARDWARE ILLUSTRATION Hardware Illustrated in actual size Fig. 2 11/16" Flat Washer (2) 3/4" Flat Washer (4) 5/16 - 18 x 1/2" Hex Head Screw (2) 5/16 - 18 x 5/8" Hex Head Screw (2) 3/8" Lock Washer (2) #10 - 24 x 1/2" Round Head Screw(4) 1/4 - 20 Hex Nut (2) #10 - 24 Hex Nu...

6 ASSEMBLY ASSEMBLINGTOOL RESTS 1. Assemble the v-grooved tool rest (A) Fig. 3, to the inside of the right wheel guard using two 5/16-18x5/8"hex head screws (B), and 3/4" flat washers (C). 2. Assemble the remaining flat surfaced tool rest (D) Fig. 3A, to the inside of the left wheel guard in...

7 Fig. 6 Fig. 7 3. Assemble long end of eye shield mounting rod (F) Fig. 7, to the side of each wheel guard using bracket (J),3/8" lockwasher and locking knob (L). The eye shield (A)is fully adjustable so it can be put in any position by mov-ing the shield (A) or loosening locking knob (L) and r...

8 Fig. 11 EXTENSION CORDS Use proper extension cords. Make sure your extensioncord is in good condition and is a 3-wire extension cordwhich has a 3-prong grounding type plug and a 3-polereceptacle which will accept the tool’s plug. When usingan extension cord, be sure to use one heavy enough tocarry...

10 PARTS, SERVICE OR WARRANTY ASSISTANCE Delta Building Trades and Home Shop Machinery Two Year Limited Warranty Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, ormachine accessory which in normal use has proven to be defective in workmanship or mater...