Delta 23-640 - Manuals

5 HARDWARE ILLUSTRATION Hardware Illustrated in actual size Fig. 2 11/16" Flat Washer (2) 3/4" Flat Washer (4) 5/16 - 18 x 1/2" Hex Head Screw (2) 5/16 - 18 x 5/8" Hex Head Screw (2) 3/8" Lock Washer (2) #10 - 24 x 1/2" Round Head Screw(4) 1/4 - 20 Hex Nut (2) #10 - 24 Hex Nu...

6 Fig. 3 ASSEMBLY ASSEMBLING TOOL RESTS 1. Assemble the v-grooved tool rest (A) Fig. 3, to the inside of the right wheel guard using two 5/16-18x5/8"hex head screws (B), and 3/4" flat washers (C). 2. Assemble the remaining flat surfaced tool rest (D) Fig. 4, to the inside of the left wheel g...

7 Fig. 7 2. Insert the short end of mounting rod (F) Fig. 7, into hole of frame (B) and fasten in place with 1/4-20x3/4"carriage head screw (G), 5/16” lock washer (H), and 1/4-20 hex nut (I). Fig. 8 3. Assemble long end of eye shield mounting rod (F) Fig. 8, to the side of each wheel guard using...

8 EXTENSION CORDS Use proper extension cords. Make sure your extensioncord is in good condition and is a 3-wire extension cordwhich has a 3-prong grounding type plug and a 3-polereceptacle which will accept the tool’s plug. When usingan extension cord, be sure to use one heavy enough tocarry the cur...

10 PARTS, SERVICE OR WARRANTY ASSISTANCE All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable•Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regardingyour Delta quality produ...