Delta 14070 - Manuals - manualsarea.com

Page 2 - TABLE OF CONTENTS

TABLE OF CONTENTS SAFETY RULES 3 ADDITIONAL SAFETY RULES FOR DRILL PRESSES 4 UNPACKING 5 CLEANING 6 ASSEMBLY INSTRUCTIONS 6-9 FASTENING DRILL PRESS TO A SUPPORTING SURFACE 9 MOTOR SPECIFICATIONS AND ELECTRICAL REQUIREMENTS Motor Specifications 10 Power Connections 10 Extension Cords 10 Grounding Ins...

Page 3 - SAFETY RULES; WARNING: FAILURE TO FOLLOW THESE RULES

Woodworking can be dangerous if safe and proper operating procedures are not followed. As with all machinery, thereare certain hazards involved with the operation of the product. Using the machine with respect and caution will consid-erably lessen the possiblity of personal injury. However, if norma...

Page 5 - UNPACKING

UNPACKING Carefully unpack the drill press and all loose items from the carton. Figure 2 illustrates the drill press and all loose itemssupplied with the machine. WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE DRILL PRESS TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU HAVE R...

Page 9 - IMPORTANT: OPEN THE CHUCK JAWS; NEVER; FASTENING DRILL PRESS; PERMANENT MOUNTING

11. IMPORTANT: Make certain the bottom of spindle (S) Fig. 11, and tapered hole (T) in chuckare clean and free of any grease, lacquer or rustpreventive coatings. NOTE: Household oven cleaner can effectively remove any substancefrom the spindle and chuck; however, carefullyfollow the manufacturer’s s...

Page 10 - MOTOR SPECIFICATIONS AND; MOTOR SPECIFICATIONS; EXTENSION CORDS

1. Drill two 3/8" diameter holes (C) Fig. 12B, correspon- ding to the mounting holes (A) Fig. 12A, of the drill press basein a 21" by 28" minimum size plywood board (D) Fig. 12B.2. Fasten the drill press base to the mounting board using the carriage bolts, nuts, and washers (E) Fig. 12B,...

Page 11 - GROUNDING INSTRUCTIONS

CAUTION: THIS TOOL MUST BE GROUNDED WHILE IN USE TO PROTECT THE OPERATOR FROM ELECTRICSHOCK. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reducethe risk of electric shock. This tool is equipped with an electric cord having an equip...

Page 12 - SPINDLE SPEEDS

SPINDLE SPEEDS Twelve spindle speeds of 250, 360, 410, 540, 590, 650,1090, 1280, 1450, 1820, 2180 and 3000 RPM are avail-able with the 14" Drill Press. Fig. 15, illustrates whichsteps of the pulleys the belts must be placed to obtainthe twelve speeds. Fig. 15

Page 17 - OPERATION; CORRECT DRILLING SPEEDS

OPERATION Your drill press is to be used with drill bits of 5/8" or less indiameter. The following directions will give the inexperi-enced operator a start on common drill press operations.Use scrap material for practice to get a feel of the machinebefore attempting regular work. IMPORTANT: When...

Page 18 - Two Year Limited Warranty; Delta Machinery

Two Year Limited Warranty Delta Machinery Delta will repair or replace, at its expense and at its option, any Delta machine, machine part, ormachine accessory which in normal use has proven to be defective in workmanship or material, pro-vided that the customer notifies his supplying distributor of ...