Dell T02G - Manuals

Feature Description Cursor Feedback Ability to see if the target has been hit by using visual feedback for success. Pen Overview The Latitude ST uses several input devices. The standard external USB keyboard and mouse are present, plus you can opt for the electrostatic pen or just use your finger as...

1. Open Control Panel. 2. Double-click Tablet PC Settings. 3. On the Tablet PC Settings window, click Calibrate. 4. On the Calibrate pen or touch input screens, select Pen input. Removing / Inserting the Stylus Battery and Pen Tip To remove/insert the battery, un-tighten the screw cap. The battery w...

Tablet PC Input Panel When an application does not directly support pen input, you can use the Tablet PC Input Panel to enter text into your application. If you tap in an editable area, the Tablet PC Input Panel icon appears. Tapping the icon makes the Input Panel slide out from the edge of the disp...

Table 3. Input Panel Icons Icon Name Function Handwriting recognition The writing pad and character pad convert handwriting into typed text. You can write continuously on the writing pad, like writing on a piece of lined paper. Use the character pad to enter one character at a time. The character pa...

Touch Usage One of the key advantages of the Tablet PC is the ability to easily switch from pen input to touch input. When you use Touch Mode , a translucent image of a computer mouse, called the touch pointer, floats beneath your finger. The touch pointer has left and right mouse buttons that you c...

Docking Station The docking station is designed for Latitude ST. The docking station can be purchased separately from dell.com. For more information, see the docking station setup guide available on support.dell.com. 15

3 Removing The SD Memory Card 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the SD memory card to release it from the computer. 3. Slide the SD memory card out of the computer. Installing The SD Memory Card 1. Push the memory card into the compartment until it clicks i...

4 Removing The Digitizer Pen 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the digitizer pen to release it from the computer. 3. Pull the digitizer pen out of the computer. Installing The Digitizer Pen 1. Push the digitizer pen into the compartment until it clicks into...

5 Removing The Label Door 1. Follow the procedures in Before Working On Your Computer . 2. Press the release latch that secures the label door. 3. Lift up the label door diagonally and remove it from the computer. Installing The Label Door 1. Place the label door diagonally and align it with the sec...

6 Removing The SIM Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Slide the SIM card holder to unlock the SIM card slot. 4. Flip the SIM card holder in an upward direction. 5. Pull the SIM card out of the SIM card holder and remove it from the comput...

Installing The SIM Card 1. Push the SIM card into the SIM card slot until it clicks into place. 2. Install the label door . 3. Follow the procedures in After Working Inside Your Computer . 24

7 Removing The Bottom Cover 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . NOTE: Remove the stylus pen and the dummy SD card to prevent any damage to the computer. 3. Remove the screws that secure the bottom cover to the computer. 4. Press on the latch to re...

Installing The Bottom Cover 1. Attach the bottom cover to the computer. 2. Push the edges of the bottom cover into the securing clips until they are fully engaged. 3. Tighten the screws that secure the bottom cover. 4. Install the label door . 5. Follow the procedures in After Working Inside Your Co...

8 Removing The Battery 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Disconnect the battery cable. 5. Remove the screws that secure the battery to the computer. 6. Lift up the battery and remove it from the computer. 27

Installing The Battery 1. Place the battery in the battery compartment. 2. Tighten the screws that secure the battery. 3. Connect the battery cable. 4. Install the bottom cover . 5. Install the label door . 6. Follow the procedures in After Working Inside Your Computer . 28

9 Removing The Wireless Local Area Network (WLAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Disconnect the antenna connected to the WLAN card. 6. Remove the screw that secures the WLAN card. 7...

Installing The Wireless Local Area Network (WLAN) Card 1. Slide the WLAN card into its slot. 2. Tighten the screws that secure the WLAN card in place. 3. Connect the antennas according to the color code on the WLAN card. 4. Install the battery . 5. Install the bottom cover . 6. Install the label doo...

10 Removing The Wireless Wide Area Network (WWAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Disconnect the antenna connected to the WWAN card. 6. Remove the screw that secures the WWAN card. 7...

Installing The Wireless Wide Area Network (WWAN) Card 1. Slide the Wireless Wide Area Network (WWAN) card into its slot. 2. Tighten the screw securing the WWAN card in place. 3. Connect the antennas according to the color code on the WWAN card. 4. Install the battery . 5. Install the bottom cover . ...

11 Removing The Internal Storage Device (Solid State Drive) 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Disconnect the battery cable. 5. Remove the screw that secures the solid state drive to the computer. 6. Lift the solid...

12 Removing The Coin-Cell Battery 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Remove the Internal Storage Drive . 6. Disconnect the coin-cell battery cable. 7. Release the coin-cell battery cable and...

13 Removing The Speaker 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Remove the screws that secure the speaker to the computer. 6. Disconnect the speaker cable. 7. Lift up the speaker and remove it fr...

Installing The Speaker 1. Connect the speaker cable to the system board. 2. Tighten the screws that secure the speaker. 3. Install the battery . 4. Install the bottom cover . 5. Install the label door . 6. Follow the procedures in After Working Inside Your Computer . 38

14 Removing The Middle Frame Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the screws that secure the middle frame assembly to the computer. 7. Peel away t...

Installing The Middle Frame Assembly 1. Attach the middle frame assembly to the computer. 2. Push the edges of the middle frame assembly into the securing clips until they are fully engaged. 3. Connect the display cable. 4. Affix the tapes that secure the antenna to the display assembly. 5. Tighten ...

15 Removing The Camera 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly . 7. Disconnect the camera cable from the system board. 8. Peel the c...

10. Remove the screw that secures the camera board to the computer. 11. Lift up the camera board and remove it from the computer. 12. Disconnect the camera cable from the camera board. Installing The Camera 1. Connect the camera cable to the camera board. 2. Place the camera on the top edge of the d...

17 Removing The Docking Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly . 7. Disconnect the docking board cable from the system board....

10. Lift up the securing clips and disconnect the docking board cable from the docking board. Installing The Docking Board 1. Connect the docking board cable to the docking board and flip down the securing clips. 2. Ensure that the docking cable is connected facing upwards, the label "DB" an...

18 Removing The System Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the SD memory card . 4. Remove the label door . 5. Remove the phone SIM . 6. Remove the bottom cover . 7. Remove the battery . 8. Remove the WLAN card . 9. Remove the WW...

15. Lift up the system board and remove it from the computer. Installing The System Board 1. Tighten the screw that secures the system board to the middle frame assembly. 2. Turn the middle-frame assembly over, and connect the camera cable to the system board, docking board cable, speaker cable, and...

19 Removing Low-Voltage Differential Signaling (LVDS) Cable 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly . 7. Peel open the tape securing...

Installing The Low-Voltage Differential Signaling (LVDS) Cable 1. Connect the display cable to the display panel assembly. 2. Affix the tape that secures the display cable. 3. Install the middle frame assembly . 4. Install the battery . 5. Install the bottom cover . 6. Install the label door . 7. In...

20 System Setup System Setup Overview System Setup allows you to: • change the system configuration information after you add, change, or remove any hardware in your computer. • set or change a user-selectable option such as the user password. • read the current amount of memory or set the type of h...

21 Troubleshooting Enhanced Pre-boot System Assessment (ePSA) The ePSA is a diagnostic utility available on your computer. This utility includes a series of tests for a computer's hardware. You can run these tests even if the computer lacks any media (hard drive, CD drive, etc.). If a ePSA-tested co...

Beep Codes The computer may emit a series of beeps during start-up if the display cannot show errors or problems. These series of beeps, called beep codes, identify various problems. The delay between each beep is 300 ms, the delay between each set of beeps is 3 seconds, and the beep sound lasts 300...

Code Cause and Troubleshooting Steps 1 System board: BIOS ROM failureSystem board failure, covers BIOS corruption or ROM error 2 MemoryNo memory/RAM detected 3 Chipset Error (North and South Bridge Chipset, DMA/IMR/ Timer Error) , Time-Of-Day Clock test failure , Gate A20 failure , Super I/O chip fa...

22 Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about yo...

23 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product,...