Page 3 - Contents
Contents Notes, Cautions, and Warnings...................................................................................................2 1 Working on Your Computer.......................................................................................................7 Before Working Inside Your Com...
Page 7 - Working on Your Computer; Before Working Inside Your Computer
1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety. Unless otherwise noted, each procedure included in this document assumes that the following conditions ex...
Page 9 - Overview; Interface
2 Overview The Dell Latitude ST features a Windows 7 operating system in a 10" touch-screen slate, combining the mobility of a tablet with the manageability, security and compatibility of a laptop.The Latitude ST , opens a new category of tablet platforms that address the unique needs of busines...
Page 10 - Pen Overview; Calibrating The Pen
Feature Description Cursor Feedback Ability to see if the target has been hit by using visual feedback for success. Pen Overview The Latitude ST uses several input devices. The standard external USB keyboard and mouse are present, plus you can opt for the electrostatic pen or just use your finger as...
Page 11 - Removing / Inserting the Stylus Battery and Pen Tip
1. Open Control Panel. 2. Double-click Tablet PC Settings. 3. On the Tablet PC Settings window, click Calibrate. 4. On the Calibrate pen or touch input screens, select Pen input. Removing / Inserting the Stylus Battery and Pen Tip To remove/insert the battery, un-tighten the screw cap. The battery w...
Page 12 - Working With Files; Entering Text
Tablet PC Input Panel When an application does not directly support pen input, you can use the Tablet PC Input Panel to enter text into your application. If you tap in an editable area, the Tablet PC Input Panel icon appears. Tapping the icon makes the Input Panel slide out from the edge of the disp...
Page 13 - Pen Flicks
Table 3. Input Panel Icons Icon Name Function Handwriting recognition The writing pad and character pad convert handwriting into typed text. You can write continuously on the writing pad, like writing on a piece of lined paper. Use the character pad to enter one character at a time. The character pa...
Page 14 - Touch Usage
Touch Usage One of the key advantages of the Tablet PC is the ability to easily switch from pen input to touch input. When you use Touch Mode , a translucent image of a computer mouse, called the touch pointer, floats beneath your finger. The touch pointer has left and right mouse buttons that you c...
Page 15 - Docking Station
Docking Station The docking station is designed for Latitude ST. The docking station can be purchased separately from dell.com. For more information, see the docking station setup guide available on support.dell.com. 15
Page 17 - Removing The SD Memory Card; Installing The SD Memory Card
3 Removing The SD Memory Card 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the SD memory card to release it from the computer. 3. Slide the SD memory card out of the computer. Installing The SD Memory Card 1. Push the memory card into the compartment until it clicks i...
Page 19 - Removing The Digitizer Pen; Installing The Digitizer Pen
4 Removing The Digitizer Pen 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the digitizer pen to release it from the computer. 3. Pull the digitizer pen out of the computer. Installing The Digitizer Pen 1. Push the digitizer pen into the compartment until it clicks into...
Page 21 - Removing The Label Door; Installing The Label Door
5 Removing The Label Door 1. Follow the procedures in Before Working On Your Computer . 2. Press the release latch that secures the label door. 3. Lift up the label door diagonally and remove it from the computer. Installing The Label Door 1. Place the label door diagonally and align it with the sec...
Page 23 - Removing The SIM Card
6 Removing The SIM Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Slide the SIM card holder to unlock the SIM card slot. 4. Flip the SIM card holder in an upward direction. 5. Pull the SIM card out of the SIM card holder and remove it from the comput...
Page 24 - Installing The SIM Card
Installing The SIM Card 1. Push the SIM card into the SIM card slot until it clicks into place. 2. Install the label door . 3. Follow the procedures in After Working Inside Your Computer . 24
Page 25 - Removing The Bottom Cover
7 Removing The Bottom Cover 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . NOTE: Remove the stylus pen and the dummy SD card to prevent any damage to the computer. 3. Remove the screws that secure the bottom cover to the computer. 4. Press on the latch to re...
Page 26 - Installing The Bottom Cover
Installing The Bottom Cover 1. Attach the bottom cover to the computer. 2. Push the edges of the bottom cover into the securing clips until they are fully engaged. 3. Tighten the screws that secure the bottom cover. 4. Install the label door . 5. Follow the procedures in After Working Inside Your Co...
Page 27 - Removing The Battery
8 Removing The Battery 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Disconnect the battery cable. 5. Remove the screws that secure the battery to the computer. 6. Lift up the battery and remove it from the computer. 27
Page 28 - Installing The Battery
Installing The Battery 1. Place the battery in the battery compartment. 2. Tighten the screws that secure the battery. 3. Connect the battery cable. 4. Install the bottom cover . 5. Install the label door . 6. Follow the procedures in After Working Inside Your Computer . 28
Page 29 - Removing The Wireless Local Area Network
9 Removing The Wireless Local Area Network (WLAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Disconnect the antenna connected to the WLAN card. 6. Remove the screw that secures the WLAN card. 7...
Page 30 - Installing The Wireless Local Area Network (WLAN) Card
Installing The Wireless Local Area Network (WLAN) Card 1. Slide the WLAN card into its slot. 2. Tighten the screws that secure the WLAN card in place. 3. Connect the antennas according to the color code on the WLAN card. 4. Install the battery . 5. Install the bottom cover . 6. Install the label doo...
Page 31 - Removing The Wireless Wide Area Network
10 Removing The Wireless Wide Area Network (WWAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Disconnect the antenna connected to the WWAN card. 6. Remove the screw that secures the WWAN card. 7...
Page 32 - Installing The Wireless Wide Area Network (WWAN) Card
Installing The Wireless Wide Area Network (WWAN) Card 1. Slide the Wireless Wide Area Network (WWAN) card into its slot. 2. Tighten the screw securing the WWAN card in place. 3. Connect the antennas according to the color code on the WWAN card. 4. Install the battery . 5. Install the bottom cover . ...
Page 33 - Removing The Internal Storage Device (Solid; Installing The Internal Storage Device (Solid State Drive)
11 Removing The Internal Storage Device (Solid State Drive) 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Disconnect the battery cable. 5. Remove the screw that secures the solid state drive to the computer. 6. Lift the solid...
Page 35 - Removing The Coin-Cell Battery; Installing The Coin-Cell Battery
12 Removing The Coin-Cell Battery 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Remove the Internal Storage Drive . 6. Disconnect the coin-cell battery cable. 7. Release the coin-cell battery cable and...
Page 37 - Removing The Speaker
13 Removing The Speaker 1. Follow the procedures in Before Working On Your Computer . 2. Remove the label door . 3. Remove the bottom cover . 4. Remove the battery . 5. Remove the screws that secure the speaker to the computer. 6. Disconnect the speaker cable. 7. Lift up the speaker and remove it fr...
Page 38 - Installing The Speaker
Installing The Speaker 1. Connect the speaker cable to the system board. 2. Tighten the screws that secure the speaker. 3. Install the battery . 4. Install the bottom cover . 5. Install the label door . 6. Follow the procedures in After Working Inside Your Computer . 38
Page 39 - Removing The Middle Frame Assembly
14 Removing The Middle Frame Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the screws that secure the middle frame assembly to the computer. 7. Peel away t...
Page 40 - Installing The Middle Frame Assembly
Installing The Middle Frame Assembly 1. Attach the middle frame assembly to the computer. 2. Push the edges of the middle frame assembly into the securing clips until they are fully engaged. 3. Connect the display cable. 4. Affix the tapes that secure the antenna to the display assembly. 5. Tighten ...
Page 41 - Removing The Camera
15 Removing The Camera 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly . 7. Disconnect the camera cable from the system board. 8. Peel the c...
Page 42 - Installing The Camera
10. Remove the screw that secures the camera board to the computer. 11. Lift up the camera board and remove it from the computer. 12. Disconnect the camera cable from the camera board. Installing The Camera 1. Connect the camera cable to the camera board. 2. Place the camera on the top edge of the d...
Page 45 - Removing The Docking Board
17 Removing The Docking Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly . 7. Disconnect the docking board cable from the system board....
Page 46 - Installing The Docking Board
10. Lift up the securing clips and disconnect the docking board cable from the docking board. Installing The Docking Board 1. Connect the docking board cable to the docking board and flip down the securing clips. 2. Ensure that the docking cable is connected facing upwards, the label "DB" an...
Page 47 - Removing The System Board
18 Removing The System Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the SD memory card . 4. Remove the label door . 5. Remove the phone SIM . 6. Remove the bottom cover . 7. Remove the battery . 8. Remove the WLAN card . 9. Remove the WW...
Page 48 - Installing The System Board
15. Lift up the system board and remove it from the computer. Installing The System Board 1. Tighten the screw that secures the system board to the middle frame assembly. 2. Turn the middle-frame assembly over, and connect the camera cable to the system board, docking board cable, speaker cable, and...
Page 49 - Removing Low-Voltage Differential Signaling
19 Removing Low-Voltage Differential Signaling (LVDS) Cable 1. Follow the procedures in Before Working On Your Computer . 2. Remove the digitizer pen . 3. Remove the label door . 4. Remove the bottom cover . 5. Remove the battery . 6. Remove the middle frame assembly . 7. Peel open the tape securing...
Page 50 - Installing The Low-Voltage Differential Signaling (LVDS) Cable
Installing The Low-Voltage Differential Signaling (LVDS) Cable 1. Connect the display cable to the display panel assembly. 2. Affix the tape that secures the display cable. 3. Install the middle frame assembly . 4. Install the battery . 5. Install the bottom cover . 6. Install the label door . 7. In...
Page 51 - System Setup; System Setup Overview; Entering System Setup
20 System Setup System Setup Overview System Setup allows you to: • change the system configuration information after you add, change, or remove any hardware in your computer. • set or change a user-selectable option such as the user password. • read the current amount of memory or set the type of h...
Page 55 - Troubleshooting; Running The ePSA Diagnostic Utility
21 Troubleshooting Enhanced Pre-boot System Assessment (ePSA) The ePSA is a diagnostic utility available on your computer. This utility includes a series of tests for a computer's hardware. You can run these tests even if the computer lacks any media (hard drive, CD drive, etc.). If a ePSA-tested co...
Page 57 - Beep Codes; LED Error Codes
Beep Codes The computer may emit a series of beeps during start-up if the display cannot show errors or problems. These series of beeps, called beep codes, identify various problems. The delay between each beep is 300 ms, the delay between each set of beeps is 3 seconds, and the beep sound lasts 300...
Page 58 - N-trig Digitizer Troubleshooting
Code Cause and Troubleshooting Steps 1 System board: BIOS ROM failureSystem board failure, covers BIOS corruption or ROM error 2 MemoryNo memory/RAM detected 3 Chipset Error (North and South Bridge Chipset, DMA/IMR/ Timer Error) , Time-Of-Day Clock test failure , Gate A20 failure , Super I/O chip fa...
Page 61 - Technical Specifications
22 Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view information about yo...
Page 65 - Contacting Dell
23 Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product,...
