Page 2 - SAN Installation and Troubleshooting Guide; Select Host Adapter
12-2 SAN Installation and Troubleshooting Guide 2. To connect an interface between the 5 x F Fibre Channel switch and each of the NetWare servers that you want to install on the SAN (see Figure 12-1), perform the following steps: a. Connect the high-speed serial data connector (HSSDC) of the interfa...
Page 3 - Novell NetWare Support for Dell PowerVault 65xF Storage Systems; LUNs per Target
support.dell.com Novell NetWare Support for Dell PowerVault 65xF Storage Systems 12-3 3. If the Select Host Adapter screen is displayed, press the up- or down-arrow key to highlight the controller you want and press <Enter>. The Controller screen is displayed with a list of options for the sel...
Page 4 - GULYH; sys
12-4 SAN Installation and Troubleshooting Guide NOTE: The NetWare configuration specified in Figure 2-2 requires that a LUN is bound on an SP in order for the Data Managed Node for Netware to communicate with the SP. If there are no LUNs bound, then a Windows NT or Windows 2000 system attached direc...
Page 5 - Netwareser vername; load
support.dell.com Novell NetWare Support for Dell PowerVault 65xF Storage Systems 12-5 7. Edit the sys:\dell\om\agent\agent.cfg file. In the User Specification section, add where admin_user_name is the administrator account and Netwareser vername is the name of your NetWare ser ver. For example, type...
Page 6 - unload omagent
12-6 SAN Installation and Troubleshooting Guide To uninstall the Data Managed Node for NetWare, perform the following steps: 1. From the NetWare ser ver console, stop the agent by using the unload omagent command. 2. From a DOS prompt on the client system, type the following commands and press <E...
Page 7 - Dell PowerVault Fibre Channel Utilities CD
support.dell.com Novell NetWare Support for Dell PowerVault 65xF Storage Systems 12-7 To create the diskette, perform the following steps: 1. Insert the Dell PowerVault Fibre Channel Utilities CD into your computer’s CD- ROM drive. 2. Insert a blank formatted diskette into the diskette drive. 3. Nav...
Page 8 - Specify server boot path; Dell
12-8 SAN Installation and Troubleshooting Guide 12. If you are asked to save the existing file scsisan.cdm select No and press <Enter>. This message only occurs if you have previously installed this file. 13. If you are asked to save the existing file scsisan.ddi select No and press <Enter&...
Page 10 - 2-10 SAN Installation and Troubleshooting Guide