Page 2 - Electrical Preparation:; Electrical Requirements for the Dell UPS; have an input cord option
Dell UPS Site Preparation Guide, EMEA (230V) Revision 2, December 2012 4200W Rack Online 210 / 717 420 / 1434 5600W Rack Line Interactive 280 / 956 560 / 1921 5600W Rack Online 390 / 989 420 / 1433 10kW Rack Online 412 / 1420 754 / 2600 Optional accessories for Dell UPS Optional Accessory Importance...
Page 3 - Electrical Wiring, Basic Installation Schematics; Suitable for all models except 5600W Online and 10kW
Dell UPS Site Preparation Guide, EMEA (230V) Revision 2, December 2012 The REPO feature shuts down the protected equipment immediately and does not follow the orderly shutdown procedure initiated by any power management software. Any devices that are operating on battery power are also shut down imm...
Page 4 - Suitable for all models (including 5600W Online and 10kW); Electrical input location of Dell UPS
Dell UPS Site Preparation Guide, EMEA (230V) Revision 2, December 2012 Basic Installation Schematic of Dell UPS, hardwired to overcurrent protection device Suitable for all models (including 5600W Online and 10kW) Electrical input location of Dell UPS If hardwiring input to UPS, input terminal block...
Page 5 - Overcurrent Protection Devices:; All Dell UPS Rack Mount Models; 0kW WW Blades; Electrical input top entry
Dell UPS Site Preparation Guide, EMEA (230V) Revision 2, December 2012 Overcurrent Protection Devices: All Dell UPS Rack Mount Models (except 5600W Online and 10kW) : In all cases the installation should include a dedicated electrical branch circuit with a 2-pole overcurrent protection device. The b...
Page 6 - Remove the cover-plate from the rear of the UPS
Dell UPS Site Preparation Guide, EMEA (230V) Revision 2, December 2012 The following table lists approved AC contactors that can be used as backfeed protection devices for 5600W Online. Manufacturer Type Rating Moeller GMBH DILM(C)32-10 600 V, 40A Tianshui Electrical Aparatus Co. Ltd (E203071) GSC1(...
Page 7 - Wire Colour; Receiving the Dell UPS; Inspecting the Equipment; Your model
Dell UPS Site Preparation Guide, EMEA (230V) Revision 2, December 2012 Step 3: Thread the input cord through the UPS back- plate and secure with the plastic stuffing gland. Ensure you leave enough free cord to connect to the UPS terminals. Step 4: Secure the bare cable ends to the UPS terminals &...
Page 8 - Installing the Dell UPS into the rack:; Amp PDU types for fit.; Actual carton may vary by model
Dell UPS Site Preparation Guide, EMEA (230V) Revision 2, December 2012 Installing the Dell UPS into the rack: Install the ReadyRails followed by the UPS chassis. Finally install the battery modules into the UPS chassis & connect the DC leads. Finish by installing the UPS front panel. Install the...