Daikin EKHBRD016AAV1- Manuals

5 FUNCTIONS OF THE REMOTE CONTROLLER All controls except for the ON / OFF BUTTON are located behind a swing down door onthe bottom half of the remote controller. To access these controls simply open the door bygently pulling down on the finger grip located on the top right hand edge of the door. Toc...

7 GENERAL OPERATION COOLING 1. Press the MODE SELECTION BUTTON (24) (if required) until the COOL MODEINDICATOR (6) is displayed. 2. Select the desired room temperature (if required) by momentarily pressing on the topor bottom section of the TEMPERATURE SET BUTTON (21) until the desiredtemperature is...

10 3. Once the desired START TIME is displayed press the PROGRAM TIMER ON/OFFBUTTON (18). The PROGRAM START TIME INDICATOR (12) will stop flashing andremain displayed. 4. Set the air conditioner in the desired mode as described above but do not press theON/OFF BUTTON (1). The PROGRAM START TIME INDI...

11 HOT START SYSTEM (Heat Pump Models Only) To prevent a cold blast of air when the air conditioner turns on in the heating mode theindoor unit incorporates a computer controller hot start system. The indoor unit microprocessor monitors the temperature of the indoor heat exchangerand operates the in...

12 SELF DIAGNOSIS FUNCTION In the unlikely event that a fault develops with the air conditioner the microprocessor in theindoor and outdoor units will diagnose the fault (where possible), display a unique faultcode on the remote controller (see below) and flash the OPERATION INDICATOR (2) onand off....