D-Link DWL-2600AP - Manuals

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 5 March 2012 List of Figures Figure 1 - Administrator UI Online Help ................................................................................................................... 10 Figure 2 - Web UI Log...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 7 March 2012 List of Tables Table 1 - Typographical Conventions ...................................................................................................................... 10 Table 2 - Requirements ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 9 March 2012 Section 1 - About This Document Section 1 - About This Document This guide describes setup, configuration, administration and maintenance for the D-Link DWL-x600AP Unified Access Point (UAP) on a ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 10 March 2012 Section 1 - About This Document Symbol Example Description Curly Braces {} {Choice1 | Choice2} Indicates that you must select a parameter from the list of choices. Vertical Bars | Choice1 | Choic...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 11 March 2012 Section 2 - Getting Started Section 2 - Getting Started The D-Link DWL-x600AP unified access point (UAP) provides continuous, high-speed access between wireless devices and Ethernet devices. It i...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 12 March 2012 Section 2 - Getting Started Required Software or Component Description Wireless Connection to the Network After initial configuration and launch of the first access point on your new wireless net...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 13 March 2012 Section 2 - Getting Started Dynamic and Static IP Addressing on the AP When you power on the access point, the built-in DHCP client searches for a DHCP server on the network in order to obtain an...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 14 March 2012 Section 2 - Getting Started •) To use a direct-cable connection, connect one end of an Ethernet straight-through or crossover cable to the network port on the access point and the other end of th...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 15 March 2012 Section 2 - Getting Started Figure 3 - Provide Basic Settings 5.) Verify the settings on the Basic Settings page. •) Review access point description and provide a new administrator password for t...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 16 March 2012 Section 2 - Getting Started Basic Settings From the Basic Settings page, you can view various information about the UAP, including IP and MAC address information, and configure the administrator ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 17 March 2012 Section 2 - Getting Started Field Description System Contact Enter the name, e-mail address, or phone number of the person to contact regarding issues related to the AP. System Location Enter the...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 18 March 2012 Section 2 - Getting Started Figure 4 - Command Line Interface (CLI) Connection Configuring the Ethernet Settings The default Ethernet settings, which include DHCP and VLAN information, might not ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 19 March 2012 Section 2 - Getting Started Action Commands Use DHCP as the connection type set management dhcp-status up Use a Static IP as the connection type set management dhcp-status down Set the Static IP ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 20 March 2012 Section 2 - Getting Started Using the CLI to Configure 802.1X Authentication Information The following table shows the commands used to configure the 802.1X supplicant information using the CLI. ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 21 March 2012 Section 2 - Getting Started Configuring Security on the Wireless Access Point You configure secure wireless client access by configuring security for each virtual access point (VAP) that you enab...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 22 March 2012 Section 3 - Viewing Access Point Status Section 3 - Viewing Access Point Status This section describes the information you can view from the tabs under the Status heading on the Administration We...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 23 March 2012 Section 3 - Viewing Access Point Status Modify Wireless Settings page. For information about configuring these settings, see “Wireless Settings” on page 37 and “Modifying Radio Settings” on page ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 24 March 2012 Section 3 - Viewing Access Point Status Field Description Persistence Choose Enabled to save system logs to non-volatile memory so that the logs are not erased when the AP reboots. Choose Disable...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 25 March 2012 Section 3 - Viewing Access Point Status Note: To apply your changes, click Apply . Changing some settings might cause the AP to stop and restart system processes. If this happens, wireless client...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 26 March 2012 Section 3 - Viewing Access Point Status Field Description Total Drop Packets Indicates total number of packets sent (in Transmit table) or received (in Received table) by this AP that were droppe...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 28 March 2012 Section 3 - Viewing Access Point Status Field Description From Station Shows the number of packets and bytes received from the wireless client and the number of packets and bytes that were droppe...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 29 March 2012 Section 3 - Viewing Access Point Status Field Description AP Detection for Radio To allow the AP radios to perform neighbor AP detection and collect information about neighbor APs, click Enabled ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 30 March 2012 Section 3 - Viewing Access Point Status Field Description Known AP List Action An AP can appear in the Known AP List if it has been moved from the Detected Rogue AP List by clicking the Grant but...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 31 March 2012 Section 3 - Viewing Access Point Status appear in the Known AP List. Viewing Managed AP DHCP Information The UAP can learn about D-Link Unified Wireless Switches on the network through DHCP respo...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 32 March 2012 Section 3 - Viewing Access Point Status Field Description AP and VAP Status Interface Indicates the name of the Radio or VAP interface. Access Category Indicates Current Access Category associate...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 33 March 2012 Section 3 - Viewing Access Point Status Field Description TSPEC Statistics Summary for Voice ACM Indicates the total number of accepted and the total number of rejected voice Traffic Streams. TSP...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 34 March 2012 Section 3 - Viewing Access Point Status Field Description Multicast Frames Transmitted Count of successfully transmitted MSDU frames where the multicast bit is set in the destination MAC address....

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 35 March 2012 Section 4 - Managing the Access Point Section 4 - Managing the Access Point This section describes how to manage the UAP and contains the following subsections: •) “Ethernet Settings” on page 35 ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 37 March 2012 Section 4 - Managing the Access Point Wireless Settings Wireless settings describe aspects of the local area network (LAN) related specifically to the radio device in the access point (802.11 Mod...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 39 March 2012 Section 4 - Managing the Access Point Field Description AeroScout™ Engine Protocol Support AeroScout Engine support provides location-based services for wireless networks. Specify whether to enab...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 40 March 2012 Section 4 - Managing the Access Point information. The DWS-4000 Series switch does not communicate with the AE. AeroScout tags operate only in 802.11b/g mode. Therefore, network administrators wh...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 42 March 2012 Section 4 - Managing the Access Point Field Description Short Guard Interval Supported This field is available only if the selected radio mode includes 802.11n. The guard interval is the dead tim...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 44 March 2012 Section 4 - Managing the Access Point Field Description TSPEC Voice ACM Limit Specify an upper limit on the amount of traffic the AP attempts to transmit on the wireless medium using a voice AC t...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 45 March 2012 Section 4 - Managing the Access Point Figure 19 - Scheduler Configuration Field Description Global Scheduler Mode A global switch to enable or disable the scheduler feature. The default is Disabl...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 46 March 2012 Section 4 - Managing the Access Point Figure 20 - Scheduler Configuration (Modify Rule) Click Apply to save the new configuration settings. Note: After making any modifications, you must click Ap...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 47 March 2012 Section 4 - Managing the Access Point Field Description Radio Scheduler Profile Operational Status 1 or 2 From the menu, select the Scheduler profile to associate with Radio 1 or Radio 2. Schedul...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 48 March 2012 Section 4 - Managing the Access Point Figure 22 - Modify Virtual Access Point Settings The following table describes the fields and configuration options on the VAP page. Field Description RADIUS...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 49 March 2012 Section 4 - Managing the Access Point Field Description Radio Select the radio to configure. VAPs are configured independently on each radio. VAP You can configure up to 16 VAPs for each radio. V...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 50 March 2012 Section 4 - Managing the Access Point Field Description Redirect Mode Enable the HTTP redirect feature to redirect wireless clients to a custom Web page. When redirect mode is enabled, the user w...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 51 March 2012 Section 4 - Managing the Access Point Field Description Key Type Select the key type by clicking one of the radio buttons: •) ASCII •) Hex WEP Keys You can specify up to four WEP keys. In each te...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 52 March 2012 Section 4 - Managing the Access Point called EAP Encapsulation Over LANs (EAPOL). IEEE 802.1X provides dynamically-generated keys that are periodically refreshed. An RC4 stream cipher is used to ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 53 March 2012 Section 4 - Managing the Access Point Field Description Enable RADIUS Accounting Select this option to track and measure the resources a particular user has consumed such as system time, amount o...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 54 March 2012 Section 4 - Managing the Access Point Field Description Cipher Suites Select the cipher suite you want to use: •) TKIP •) CCMP (AES) •) TKIP and CCMP (AES) Both TKIP and AES clients can associate...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 55 March 2012 Section 4 - Managing the Access Point Field Description Enable pre- authentication If for WPA Versions you select only WPA2 or both WPA and WPA2, you can enable pre- authentication for WPA2 clien...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 56 March 2012 Section 4 - Managing the Access Point Field Description Session Key Refresh Rate Enter a value to set the interval at which the AP will refresh session (unicast) keys for each client associated t...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 57 March 2012 Section 4 - Managing the Access Point Figure 27 - Configure WDS Bridges Before you configure WDS on the AP, note the following guidelines: •) When using WDS, be sure to configure WDS settings on ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 59 March 2012 Section 4 - Managing the Access Point Controlling Access by MAC Authentication A Media Access Control (MAC) address is a hardware address that uniquely identifies each node of a network. All IEEE...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 60 March 2012 Section 4 - Managing the Access Point Field Description Filter To set the MAC Address Filter, select one of the following options: •) Allow only stations in the list . Any station that is not in ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 61 March 2012 Section 4 - Managing the Access Point Field Description Load Balancing Enable or disable load balancing: To enable load balancing on this AP, click Enable . To disable load balancing on this AP, ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 62 March 2012 Section 4 - Managing the Access Point Configuring Managed Access Point Settings To add the IP address of a D-Link Unified Wireless Switch to the AP, click the Managed Access Point tab under the M...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 63 March 2012 Section 4 - Managing the Access Point Configuring 802.1X Authentication On networks that use IEEE 802.1X, port-based network access control, a supplicant (client) cannot gain access to the networ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 64 March 2012 Section 4 - Managing the Access Point Creating a Management Access Control List (ACL) You can create an access control list (ACL) that lists up to five IPv4 hosts and five IPv6 hosts that are aut...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 65 March 2012 Section 5 - Configuring Access Point Services Section 5 - Configuring Access Point Services This section describes how to configure services on the UAP and contains the following subsections: •) ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 66 March 2012 Section 5 - Configuring Access Point Services Field Description Generate HTTP SSL Certificate Select this option to generate a new SSL certificate for the secure Web server. This should be done o...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 67 March 2012 Section 5 - Configuring Access Point Services Figure 34 - SNMP Configuration Field Description SNMP Enabled/ Disabled You can specify the SNMP administrative mode on your network. By default SNMP...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 68 March 2012 Section 5 - Configuring Access Point Services Field Description Hostname, address or subnet of Network Management System Specify the IPv4 DNS hostname or subnet of the machines that can execute g...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 69 March 2012 Section 5 - Configuring Access Point Services Field Description SSH Status Choose to either enable or disable SSH access to the AP CLI: •) To permit remote access to the AP by using SSH, click En...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 70 March 2012 Section 5 - Configuring Access Point Services Figure 37 - Modify QoS Queue Parameters Field Description EDCA Template Possible options are: Default , Optimized for Voice, and Custom . AP EDCA Par...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 71 March 2012 Section 5 - Configuring Access Point Services Field Description Max. Burst Length The Max. Burst Length is an AP EDCA parameter and only applies to traffic flowing from the AP to the client stati...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 72 March 2012 Section 5 - Configuring Access Point Services Note: After you configure the QoS settings, you must click Apply to apply the changes and to save the settings. Changing some settings might cause th...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 73 March 2012 Section 5 - Configuring Access Point Services Field Description Non Urgent Severity Configures the severity level for log messages that are considered to be non-urgent. Messages in this category ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 74 March 2012 Section 5 - Configuring Access Point Services To set the system time either manually or by specifying the address of the NTP server for the AP to use, click the Services > Time Settings (NTP) ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 75 March 2012 Section 6 - Configuring SNMPv3 Section 6 - Configuring SNMPv3 This section describes how to configure the SNMPv3 settings on the UAP and contains the following subsections: •) “Configuring SNMPv3...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 76 March 2012 Section 6 - Configuring SNMPv3 Note: After you configure the SNMPv3 Views settings, you must click Apply to apply the changes and to save the settings. Configuring SNMPv3 Groups SNMPv3 groups all...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 77 March 2012 Section 6 - Configuring SNMPv3 Field Description Read Views Select the read access to management objects (MIBs) for the group: •) view-all — The group is allowed to view and read all MIBs. •) vie...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 78 March 2012 Section 6 - Configuring SNMPv3 Note: After you configure the SNMPv3 Users settings, you must click Apply to apply the changes and to save the settings. Configuring SNMPv3 Targets SNMPv3 Targets s...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 79 March 2012 Section 7 - Maintaining the Access Point Section 7 - Maintaining the Access Point This section describes how to maintain the UAP. From the UAP Administrator UI, you can perform the following main...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 80 March 2012 Section 7 - Maintaining the Access Point Figure 46 - Confirmation Prompt 3.) To proceed with the download, select OK . A dialog box opens allowing you to view or save the file. 4.) Select the Sav...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 81 March 2012 Section 7 - Maintaining the Access Point 2.) Use the Browse button to select the file to restore. 3.) Click the Restore button. A File Upload or Choose File dialog box displays. 4.) Navigate to t...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 82 March 2012 Section 7 - Maintaining the Access Point Figure 50 - Manage Firmware (TFTP) 2.) Enter a name (1 to 63 characters) for the image file in the Image Filename field, including the path to the directo...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 83 March 2012 Section 7 - Maintaining the Access Point 5.) To verify that the firmware upgrade completed successfully, check the firmware version shown on the Upgrade page (or the Basic Settings page). If the ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 84 March 2012 Section 7 - Maintaining the Access Point Figure 53 - Packet Capture Status The following table describes information the packet capture status fields display. Field Description Current Capture St...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 85 March 2012 Section 7 - Maintaining the Access Point Upon activation, the packet capture proceeds until one of the following occurs: •) The capture time reaches configured duration. •) The capture file reach...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 87 March 2012 Section 7 - Maintaining the Access Point Field Description Remote Capture Port Specify the remote port to use as the destination for packet captures. (range 1 to 65530). Table 50 - Remote Packet ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 88 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Section 8 - Configuring Client Quality of Service (QoS) This section describes how to configure QoS settings that affect traffic from the w...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 89 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description Client QoS Mode Enable or disable QoS operation on the VAP selected in the VAP menu. QoS must be enabled globally (from t...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 90 March 2012 Section 8 - Configuring Client Quality of Service (QoS) MAC ACLs MAC ACLs are Layer 2 ACLs. You can configure the rules to inspect fields of a frame such as the source or destination MAC address,...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 91 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description ACL Type Select the type of ACL to configure: •) IPv4 •) IPv6 •) MAC IPv4 and IPv6 ACLs control access to network resourc...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 92 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description Source Port Select this field to include a source port in the match condition for the rule. The source port is identified...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 93 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description IP Precedence Select this option and enter a value to use the packet’s IP Precedence value in the IP header as match crit...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 94 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description Source Port Select this option to include a source port in the match condition for the rule. The source port is identifie...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 95 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description EtherType Select the EtherType field to compare the match criteria against the value in the header of an Ethernet frame. ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 96 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Defining DiffServ To use DiffServ for Client QoS, use the Class Map and Policy Map pages to define the following categories and their crite...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 97 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description Class Map Name Select name of the class to configure. Use the fields in the Match Criteria Configuration area to match pa...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 98 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description IP DSCP To use IP DSCP as a match criteria, select the check box and select a DSCP value keyword or enter a DSCP. Select ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 99 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description EtherType Select the EtherType field to compare the match criteria against the value in the header of an Ethernet frame. ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 100 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Creating a DiffServ Policy Map Use the Policy Map page to create DiffServ policies and to associate a collection of classes with one or mo...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 101 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description Drop Select Drop to specify that all packets for the associated traffic stream are to be dropped if the class map criter...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 102 March 2012 Section 8 - Configuring Client Quality of Service (QoS) Field Description ACL Type Up Shows the type of ACL that is applied to traffic in the inbound (client-to-AP) direction, which can be one o...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 104 March 2012 Section 9 - Clustering Multiple APs Section 9 - Clustering Multiple APs The UAP supports AP clusters. A cluster provides a single point of administration and lets you view, deploy, configure, an...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 105 March 2012 Section 9 - Clustering Multiple APs Figure 64 - Manage Access Points In The Cluster (Active) If clustering is currently disabled on the AP, the Start Clustering button is visible. If clustering ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 106 March 2012 Section 9 - Clustering Multiple APs Removing an Access Point from the Cluster To remove an access point from the cluster, do the following. 1.) Go to the Administration Web pages for the cluster...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 107 March 2012 Section 9 - Clustering Multiple APs A session in this context is the period of time in which a user on a client device (station) with a unique MAC address maintains a connection with the wireles...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 108 March 2012 Section 9 - Clustering Multiple APs Configuring and Viewing Channel Management Settings When Channel Management is enabled, the UAP automatically assigns radio channels used by clustered access ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 109 March 2012 Section 9 - Clustering Multiple APs Viewing Current Channel Assignments and Setting Locks The Current Channel Assignments section shows a list of all access points in the cluster by IP Address. ...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 110 March 2012 Section 9 - Clustering Multiple APs Field Description Change channels if interference is reduced by at least Specify the minimum percentage of interference reduction a proposed plan must achieve...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 112 March 2012 Section 9 - Clustering Multiple APs Viewing Details for a Cluster Member To view details on a cluster member AP, click on the IP address of a cluster member at the top of the page. The following...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 113 March 2012 Appendix A - Default AP Settings Appendix A - Default AP Settings When you first power on a UAP, it has the default settings shown in the following table. Feature Default System Information User...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 115 March 2012 Appendix B - Configuration Examples Appendix B - Configuration Examples This appendix contains examples of how to configure selected features available on the UAP. Each example contains procedur...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 116 March 2012 Appendix B - Configuration Examples set vap vap1 vlan-id 2 Note: The previous command sets the VLAN ID to 2 for VAP 1 on both radios. To set the VLAN ID for VAP 1 on radio one only, use the foll...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 117 March 2012 Appendix B - Configuration Examples Radio Configuration from the Web Interface 1.) Log onto the AP and navigate to the Manage > Radio page. Figure 70 - Radio Configuration from the Web Interf...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 118 March 2012 Appendix B - Configuration Examples Radio Configuration Using SNMP 1.) Load the DLINK-WLAN-ACCESS-POINT-X600-MIB module. 2.) From the MIB tree, navigate to the objects in the apRadio table (apRa...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 119 March 2012 Appendix B - Configuration Examples WDS Configuration from the CLI 1.) Connect to the MyAP1 by using Telnet, SSH, or a serial connection. 2.) Configure the remote MAC address for MyAP2. set inte...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 120 March 2012 Appendix B - Configuration Examples 5.) Click Start Clustering to enable the clustering feature. After you refresh the page, other APs that are on the same bridged segment, have radios in the sa...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 121 March 2012 Appendix B - Configuration Examples Configuring Client QoS This example shows how to enable client QoS, configure an ACL and a DiffServ policy on the AP, and to apply the ACL and the Policy to t...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 122 March 2012 Appendix B - Configuration Examples •) Wild Card Mask : 0.0.0.255 •) Source Port : Select the option •) Select From List (Source Port) : www 7.) Click Apply to save the rule. Figure 76 - Configu...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 124 March 2012 Appendix B - Configuration Examples Figure 81 - Configure Client QoS DiffServ Policy Map Settings (Rule) 10.) For the class_voip Class Map , select the Mark IP Dscp option, and then select ef fr...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 125 March 2012 Appendix B - Configuration Examples 4.) Add another rule to acl1 that allows all traffic from the host with an IP address of 192.168.1.23. add rule acl-name acl2 acl-type ipv4 action permit prot...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 126 March 2012 Appendix B - Configuration Examples •) Use 1.3.6.1.4.1.171.10.128.1.1.26.10.3.1.16.1.4.97.99.108.49.2 to set apQosAclRuleCommit to a value of 1 (true), which saves the rule. 6.) Use the apQosGlo...

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 127 March 2012 Appendix C - Statements Appendix C - Statements Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following ...