D-Link DP-300U - Manual
D-Link DP-300U – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – “Network Port”; cable to the LAN port of the gateway or switch; OFF; Connecting The DP-300U To Your Network; Parrallel Port 1; For Mac OS printing, please refer to users manual located on CD-ROM.
- Page 3 – Start; Click
- Page 4 – Network; tab of; Click OK; to apply IP address
- Page 5 – Add Printer; Click on the; Configure; tab to view; Port Settings
- Page 7 – OK; Next
- Page 9 – Your Setup is Complete!; Setting up your DP-300U for network; “Yes”
- Page 10 – Notes
- Page 12 – Technical Support; D-Link Technical Support over the Telephone:; D-Link Technical Support over the Internet:
1
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DP-300U 02142003
If any of the above items are missing, please contact your reseller.
CD-ROM (Software, Manual and Warranty)
Before You Begin
DP-300U Multi-Port Print Server
Check Your Package Contents
DP-300U
D-Link Fast Ethernet
Print Server
5V DC 2.5A Power Adapter
Using a power
supply with a
different voltage rating
will damage this
product and void its
warranty.
This product can be setup using
any current web browser, i.e.,
Internet Explorer 6 or Netscape
Navigator 7.0
You will need an Ethernet-enabled device, such as a laptop or desktop computer
and a USB or parallel-port printer that will connect to the DP-300U.
Important: TURN OFF the power to the printer before installing
the DP-300U.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 First, insert one end of a straight-through CAT5 Ethernet RJ-45 cableinto the “Network Port” (shown below.) Connect the other end of the cable to the LAN port of the gateway or switch . Note: Do not connect the power cord to the DP-300U until you are advised to do so Next, make sure that the Print...
3 Setting up your DP-300U for network printing in Windows XP The factory default IP address of the DP-300U is 192.168.0.10. In order toprint to the printer(s) through the DP-300U, the DP-300U must have thesame IP network settings as your network. IP address can be assignedmanually or automatically b...
4 Setting up your DP-300U for network printing in Windows XP (continued) Using your web browser enterthe IP address of the DP-300U.By default the IP address is setto 192.168.0.10 The IP address of the DP-300U canbe modified on the Network tab of the web configuration menu. The following instructions...
