D-Link DWL-2600AP - Manual

D-Link DWL-2600AP

D-Link DWL-2600AP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
37 Page 37
38 Page 38
39 Page 39
40 Page 40
41 Page 41
42 Page 42
43 Page 43
44 Page 44
45 Page 45
46 Page 46
47 Page 47
48 Page 48
49 Page 49
50 Page 50
51 Page 51
52 Page 52
53 Page 53
54 Page 54
55 Page 55
56 Page 56
57 Page 57
58 Page 58
59 Page 59
60 Page 60
61 Page 61
62 Page 62
63 Page 63
64 Page 64
65 Page 65
66 Page 66
67 Page 67
68 Page 68
69 Page 69
70 Page 70
71 Page 71
72 Page 72
73 Page 73
74 Page 74
75 Page 75
76 Page 76
77 Page 77
78 Page 78
79 Page 79
80 Page 80
81 Page 81
82 Page 82
83 Page 83
84 Page 84
85 Page 85
86 Page 86
87 Page 87
88 Page 88
89 Page 89
90 Page 90
91 Page 91
92 Page 92
93 Page 93
94 Page 94
95 Page 95
96 Page 96
97 Page 97
98 Page 98
99 Page 99
100 Page 100
101 Page 101
102 Page 102
103 Page 103
104 Page 104
105 Page 105
106 Page 106
107 Page 107
108 Page 108
109 Page 109
110 Page 110
111 Page 111
112 Page 112
113 Page 113
114 Page 114
115 Page 115
116 Page 116
117 Page 117
118 Page 118
119 Page 119
120 Page 120
121 Page 121
122 Page 122
123 Page 123
124 Page 124
125 Page 125
126 Page 126
127 Page 127
128 Page 128
Page: / 128

Table of Contents:

  • Page 2 – Table of Contents
  • Page 3 – Section 5 - Configuring Access Point Services
  • Page 4 – Appendix B - Configuration Examples
  • Page 5 – List of Figures
  • Page 7 – List of Tables
  • Page 9 – Section 1 - About This Document; Document Organization; Unified Access Point Administrator’s Guide; Additional Documentation; Unified Access Point CLI Command Reference; Document Conventions; Symbol; Indicates an optional fixed parameter.
  • Page 10 – Indicates that you must select a parameter from the; Online Help, Supported Browsers, and Limitations; Unified Access
  • Page 11 – Section 2 - Getting Started; User; Administrator’s Computer Requirements; Required Software or Component; Serial or Ethernet Connection to the
  • Page 12 – Wireless Client Requirements; Required Component; “Virtual
  • Page 13 – Dynamic and Static IP Addressing on the AP; “Configuring the Ethernet; Recovering an IP Address; configuration to the factory defaults (see; Discovering a Dynamically Assigned IP Address; IP address associated with the MAC address of the AP.; Installing the UAP; To install the UAP, use the following steps:
  • Page 14 – Logon; When you first log in, the; Basic Settings; page for UAP administration is displayed, as the following figure
  • Page 15 – admin; Apply; settings when WLAN traffic is low.
  • Page 16 – configuration options on the; Field; Identifies the AP hardware model.
  • Page 17 – Connecting to the AP Web Interface by Using the IPv6 Address; Using the CLI to View the IP Address
  • Page 18 – Configuring the Ethernet Settings; “Ethernet Settings” on page; Using the CLI to Configure Ethernet Settings; Action; Get the DNS Name; Get Current Settings for the Ethernet (Wired) Internal; Enable the untagged VLAN
  • Page 19 – Set the Default Gateway; untagged VLAN so that all traffic is tagged with a VLAN ID.; Configuring IEEE 802.1X Authentication; If your network uses IEEE 802.1X see
  • Page 20 – Using the CLI to Configure 802.1X Authentication Information; View 802.1X supplicant settings; Verifying the Installation; advanced configuration features.
  • Page 21 – Configuring Security on the Wireless Access Point; following default settings:
  • Page 22 – Section 3 - Viewing Access Point Status; Status; Viewing Interface Status; Interfaces; Wired Settings; For information about configuring these settings, see; Wireless Settings
  • Page 23 – From the; Persistent; to determine how many log messages are displayed in the Event log.; Configuring Persistent Logging Options; To configure persistent logging on the
  • Page 24 – We recommend that you change AP settings when WLAN traffic is low.; Configuring the Log Relay Host for Kernel Messages; To enable and configure Log Relaying on the
  • Page 25 – Viewing Transmit and Receive Statistics; The name of the Ethernet or VAP interface.; VAP; “Configuring Load Balancing” on page
  • Page 26 – Viewing Associated Wireless Client Information; The following describes the fields on the; Some points to keep in mind with regard to this field are:; Viewing TSPEC Client Associations; TSPEC Client Association Status and Statistics
  • Page 28 – Link Integrity Monitoring; Viewing Rogue AP Detection
  • Page 29 – Detected Rogue AP List; Type; Networking Framework in Infrastructure Mode.; Privacy; •) Security is configured on the AP from the
  • Page 30 – Known AP List; Network Name; “Modifying Radio Settings” on page 40; Saving and Importing the Known AP List; Save
  • Page 31 – Viewing Managed AP DHCP Information; Managed AP DHCP; information, see the; Viewing TSPEC Status and Statistics Information; The; •) Summary information about TSPEC sessions by radio; TSPEC Status and Statistics
  • Page 32 – AP and VAP Status; Viewing TSPEC AP Statistics Information; To view TSPEC AP statistics, click the
  • Page 33 – Viewing Radio Statistics Information
  • Page 34 – Count of ACK frames not received when expected.; Viewing Email Alert Operational Status; To view the Email Alert Operational Status, click the; The Email Alert operational status The status is either
  • Page 35 – Section 4 - Managing the Access Point; •) “Ethernet Settings” on page 35; Manage; heading on the Administration; management VLAN on the AP.; Ethernet Settings
  • Page 37 – To configure the wireless interface, click the; Manage > Wireless Settings; Specify whether you want the radio interface on or off.; MAC Address; a unique MAC address for each radio.
  • Page 39 – “Enabling AeroScoutTM Engine; “Configuring Load; Enabling AeroScoutTM Engine Support
  • Page 40 – Modifying Radio Settings; Radio; Radio Settings
  • Page 42 – Enter a value from 20 to 2000 milliseconds.
  • Page 44 – TSPEC the AP ignores video TSPEC requests from client stations.; select and configure the other radio. Be sure to click; Configuring Radio and VAP Scheduler; wireless clients only during specific times of day.
  • Page 45 – Scheduler Operational Status
  • Page 46 – to save the new configuration settings.; to apply the changes and to save the; Scheduler Association Settings; Scheduler profiles, select the; Scheduler Association; tab in the; section. By default, there are no Scheduler
  • Page 47 – Radio Scheduler Profile Operational Status; Scheduler Profile; VAP Scheduler Profile Operational Status; Virtual Access Point Settings; global IPv4 RADIUS server settings you configure.
  • Page 48 – You can toggle between the address types to configure
  • Page 49 – You can enable or disable a configured network.
  • Page 50 – Enable the; HTTP; associates with the AP and sends HTTP traffic.; After you configure the VAP settings, you must click; AP settings when WLAN traffic is low.; None; Static WEP
  • Page 51 – •) Hex — Includes digits 0 to 9 and the letters A to F.; Characters Required:; The number of characters you enter into the WEP Key fields is; Authentication; Static WEP Rules; If you use Static WEP, the following rules apply:
  • Page 52 – server IP address and key in the following fields.; Specify the IP version that the RADIUS server uses.; RADIUS IP Address; Enter the RADIUS key in the text box.
  • Page 53 – After you configure the security settings, you must click; WPA Personal; which provides the best security per the IEEE 802.11i standard.
  • Page 54 – WPA Enterprise; WPA
  • Page 55 – RADIUS Key
  • Page 56 – client associated to the VAP.; to apply the changes and to; Configuring the Wireless Distribution System (WDS); number of links to connect.; WDS
  • Page 57 – both
  • Page 59 – Controlling Access by MAC Authentication; “Virtual Access Point Settings”; Configuring a MAC Filter and Station List on the AP; set the filter, you can
  • Page 60 – Configuring MAC Authentication on the RADIUS Server; RADIUS Server Attribute; Configuring Load Balancing
  • Page 61 – Enable or disable load balancing:; Enable; After you configure the load balancing settings, you must click; you change AP settings when WLAN traffic is low.; Managed Access Point Overview; Standalone Mode; Transitioning Between Modes
  • Page 62 – Configuring Managed Access Point Settings
  • Page 63 – Configuring 802.1X Authentication; Enabled; Click; EAP Method; to apply
  • Page 64 – Creating a Management Access Control List (ACL); Management ACL; five IPv4 addresses; Enter up to; five IPv6 addresses; After you configure the settings, click
  • Page 65 – “Web Server Settings” on page 65; Web Server Settings; are enabled. Either access type can be disabled separately.; Web Server; HTTP Server Status Enable; or
  • Page 66 – accepted on the browser. Click the; Configuring SNMP on the Access Point; see
  • Page 67 – to save your configuration changes.
  • Page 68 – address; After you configure the SNMP settings, you must click; Setting the SSH Status
  • Page 69 – Setting the Telnet Status; Configuring Quality of Service; AP Enhanced Distributed Channel Access (EDCA) Parameters; QoS; heading and configure settings as described in the
  • Page 70 – AP EDCA Parameters; Queue; specifies a wait time for data frames. The wait; cwMin
  • Page 71 – downstream; Disabled; Station EDCA Parameters; Other QoS Settings; No
  • Page 72 – Configuring Email Alert; Email Alert Global Configuration; Severity
  • Page 73 – Email Alert Mail Server Configuration; After you configure the Email Alert settings, click
  • Page 74 – After you configure the Time settings, you must click
  • Page 75 – Section 6 - Configuring SNMPv3; •) “Configuring SNMPv3 Views” on page 75; Configuring SNMPv3 Views; excluded; Enter a name to identify the MIB view.; include; Enter an; OID string
  • Page 76 – Configuring SNMPv3 Groups; RO
  • Page 77 – Configuring SNMPv3 Users
  • Page 78 – Configuring SNMPv3 Targets; Enter the UDP port to use for sending SNMP targets.; Users; “Configuring SNMPv3 Users” on page; After you configure the SNMPv3 Target settings, you must click
  • Page 79 – Section 7 - Maintaining the Access Point; This section describes how to maintain the UAP.; Saving the Current Configuration to a Backup File; for; Configuration File; Enter the; Server IP; address of the TFTP server.
  • Page 80 – A dialog box opens allowing you to view or save the file.; Save File; option and select; OK; Restoring the Configuration from a Previously Saved File; the reboot process to complete, which might take several minutes.
  • Page 81 – Performing AP Maintenance; Resetting the Factory Default Configuration; button on the; Configuration; Upgrading the Firmware; HTTP to perform firmware upgrades.
  • Page 82 – tar
  • Page 83 – Upgrade; Packet Capture Configuration and Settings; Wireless packet capture operates in two modes:; Packet Capture Status
  • Page 84 – Shows whether packet capture is running or stopped.; Packet Capture Parameter Configuration; to capture the 802.11 beacons detected or transmitted by the radio.; Packet File Capture
  • Page 85 – Remote Packet Capture
  • Page 87 – stopped when the capture file download command is triggered.; to; TFTP Server
  • Page 88 – Configuring VAP QoS Parameters; VAP QoS Parameters; not have their own attributes defined by a RADIUS server.; VAP QoS; Client QoS operation on the AP.
  • Page 89 – QoS operation on the VAP selected in the VAP menu.; Bandwidth Limit; Managing Client QoS ACLs; IPv4 and IPv6 ACLs; IP ACLs classify traffic for Layers 3 and 4.
  • Page 90 – MAC ACLs; the; AP QoS Parameters; “ACL Configuration Process” on page; Client QoS ACL; Client QoS ACL; ACL Configuration; ACL Name
  • Page 91 – ACL Rule Configuration
  • Page 92 – is identified in the datagram header.; Wild Card Mask; Specifies the destination IP address wildcard mask.
  • Page 93 – for comparison against the IP TOS field in a packet.; Source IPv6; Enter the prefix length of the source IPv6 address.
  • Page 94 – Destination IPv6; Enter the prefix length of the destination IPv6 address.; IPv6 Flow Label; Precedence or TOS bits) to use for match criteria.
  • Page 95 – hexadecimal number in the range of 0600 – FFFF.; Creating a DiffServ Class Map; best effort
  • Page 96 – Defining DiffServ; To use DiffServ for Client QoS, use the; Policy Map; pages to define the following categories and their; To configure a DiffServ Class Map, click the; Class Map Configuration; Enter a; Class Map Name; Match Criteria Configuration
  • Page 97 – IPv4 Class Maps
  • Page 98 – Select from a list of DSCP types.
  • Page 99 – hexidecimal number in the range of 0600 – FFFF.
  • Page 100 – Creating a DiffServ Policy Map; page. The processing is defined by a policy’s attributes on the; Enter the committed rate, in Kbps, to which traffic must conform.
  • Page 101 – Client QoS Status
  • Page 102 – Configuring RADIUS-Assigned Client QoS Parameters; not present, the Client QoS setting on the AP is used.; RADIUS
  • Page 104 – Section 9 - Clustering Multiple APs; Managing Cluster Access Points in the Cluster; Clustering APs; location and cluster name for a cluster member. From the; The following figure shows the
  • Page 105 – Specifies the IP address for the access point.; Enter the name of the cluster for the AP to join.
  • Page 106 – Removing an Access Point from the Cluster; Go to the Administration Web pages for the clustered access point.; Adding an Access Point to a Cluster; field to identify the AP within the cluster.; Cluster Name; Navigating to Configuration Information for a Specific AP; clustered; Navigating to an AP by Using its IP Address in a URL; IPAddressOfAccessPoint; Managing Cluster Sessions
  • Page 107 – This is derived from the location description specified on the; Error Rate; Sorting Session Information
  • Page 108 – Configuring and Viewing Channel Management Settings; the APs to new channels per an efficiency algorithm (or; Channel Management; Stopping/Starting Automatic Channel Assignment; Start
  • Page 109 – Viewing Current Channel Assignments and Setting Locks; Current Channel Assignments; Locked; Viewing the Last Proposed Set of Changes; Proposed Channel Assignments; Specifies the IP Address for the access point.; Configuring Advanced Settings; Advanced Settings
  • Page 110 – continually disrupted for minimal gains in efficiency.; Determine if there; Viewing Wireless Neighborhood Information; rogue
  • Page 112 – Viewing Details for a Cluster Member; local area network. It is also referred to as the; Beacon Interval; Shows the Beacon interval being used by this access point.
  • Page 113 – Appendix A - Default AP Settings; Feature
  • Page 115 – •) “Configuring a VAP” on page 115; Configuring a VAP; Enter; VLAN ID; Marketing; from the menu in the Security column. Additional fields appear.; Key; VAP Configuration from the CLI
  • Page 116 – VAP Configuration Using SNMP; From the MIB tree, navigate to the objects in the apVap table.; Configuring Radio Settings
  • Page 117 – ) Log onto the AP and navigate to the; is; to update the AP with the new settings.; Radio Configuration from the CLI; ) Allow a maximum of 100 stations to connect to the AP at a time.
  • Page 118 – Radio Configuration Using SNMP; Configuring the Wireless Distribution System; abcdefghijk
  • Page 119 – WDS Configuration from the CLI; WDS Configuration Using SNMP; Clustering Access Points; Clustering APs by Using the Web Interface; Cluster > Access Points; Stop Clustering; so you can change the Clustering Options.
  • Page 120 – Start Clustering; to enable the clustering feature.; page to view the channel assignments.; Clustering APs by Using the CLI; ) Stop clustering so you can change the location and cluster name.; Clustering APs by Using SNMP; Cluster configuration by using SNMP is not supported.
  • Page 121 – Configuring Client QoS; Configuring QoS by Using the Web Interface; Client QoS > Client QoS ACL; Match Every; option is selected and
  • Page 122 – from the; option for
  • Page 124 – Class Map; option, and then select; ef; Select From List; and the; Configuring QoS by Using the CLI
  • Page 125 – DiffServ Configuration; is the
  • Page 126 – From the MIB tree, navigate to the objects in the apQos > apAclTable.; Use the apVapQosMode object to set the status of VAP 2 to up (1).
  • Page 127 – Appendix C - Statements; Federal Communication Commission Interference Statement
Loading the manual

Unified Access Point Administrator’s Guide

Unified Access Point Administrator’s Guide

Page 1

March 2012

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Table of Contents

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 2 March 2012 Table of Contents Section 1 - About This Document ............................................................................................9 Document Organization .................................

Page 3 - Section 5 - Configuring Access Point Services

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 3 March 2012 Controlling Access by MAC Authentication ......................................................................................................... 59 Configuring a MAC Filter and Station List on t...

Page 4 - Appendix B - Configuration Examples

Unified Access Point Administrator’s Guide Unified Access Point Administrator’s Guide Page 4 March 2012 Viewing the Last Proposed Set of Changes ................................................................................................ 109 Configuring Advanced Settings ...........................

Other D-Link Models

All D-Link Other