D-Link DIR-651 - Manuals

2 D-Link DIR-651 User Manual Section 1 - Product Overview System Requirements Network.Requirements • An Ethernet-based Cable or DSL modem • IEEE 802.11n or 802.11g wireless clients • 10/100/1000 Ethernet Web-based.Configuration. Utility.Requirements Computer.with.the.following: • Windows®, Macintosh...

3 D-Link DIR-651 User Manual Section 1 - Product Overview Introduction TOTAL.PERFORMANCE Combines award winning router features and 802.11n wireless technology to provide the best wireless performance. TOTAL.SECURITY The most complete set of security features including Active Firewall and WPA2™ to p...

4 D-Link DIR-651 User Manual Section 1 - Product Overview •. Faster.Wireless.Networking - The DIR-651 provides up to 300Mbps* wireless connection with other 802.11n wireless clients. This capability allows users to participate in real-time activities online, such as video streaming, online gaming, a...

5 D-Link DIR-651 User Manual Section 1 - Product Overview Hardware Overview Connections 1 LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and hubs. 2 Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. 3 Power Recept...

6 D-Link DIR-651 User Manual Section 1 - Product Overview LEDs 1 Power LED A solid light indicates a proper connection to the power supply. 2 Internet LED A solid light indicates connection on the Internet port. This LED blinks during data transmission. A solid blue light indicates that there is an ...

7 D-Link DIR-651 User Manual Section 2 - Installation Before you Begin Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Please configu...

8 D-Link DIR-651 User Manual Section 2 - Installation Wireless Installation Considerations The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind that the number, thickness and loca...

9 D-Link DIR-651 User Manual Section 2 - Installation The DIR-651 includes a Quick Router Setup Wizard CD. Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the Quick. Router. Setup.Wizard. CD in the CD-ROM drive. The step-by-step ins...

10 D-Link DIR-651 User Manual Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explor...

11 D-Link DIR-651 User Manual Section 3 - Configuration Setup Wizard You may click Setup.Wizard to quickly configure your router. Skip to the next page. If you want to enter your settings without running the wizard, click Manual. Configuration and skip to page 15. Click Launch.Internet.Connection.Se...

15 D-Link DIR-651 User Manual Section 3 - Configuration Manual Configuration Select the type of Internet connection you have. Select Dynamic. IP. (DHCP) , PPPoE , PPTP , L2TP , or Static . Refer to the next few pages for more information. When this option is enabled, the router will speed up NAT per...

17 D-Link DIR-651 User Manual Section 3 - Configuration Select PPPoE.(Username/Password) from the drop-down menu. Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic . Enter the IP address (Static PPPoE only). Enter you...

18 D-Link DIR-651 User Manual Section 3 - Configuration Select Static if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic . Enter the IP address (Static PPTP only). Enter the Primary and Secondary DNS Server Addresses (Static PPTP on...

21 D-Link DIR-651 User Manual Section 3 - Configuration Check the box to enable the wireless function. If you do not want to use wireless, uncheck the box to disable all the wireless functions. The schedule of time when the wireless settings rules will be enabled. The schedule may be set to Always ,...

22 D-Link DIR-651 User Manual Section 3 - Configuration This section will allow you to change the local network settings of the router and to configure the DHCP settings. Network Settings Enter the IP address of the router. The default IP address is 192.168.0.1. If you change the IP address, once yo...

23 D-Link DIR-651 User Manual Section 3 - Configuration DHCP Server Settings DHCP stands for Dynamic Host Control Protocol. The DIR-651 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be...

24 D-Link DIR-651 User Manual Section 3 - Configuration DHCP Reservation If you want a computer or device to always have the same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. Note: This IP address must be within the DH...

25 D-Link DIR-651 User Manual Section 3 - Configuration The DIR-651 can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network). The DIR-651 firewall feature filter...

27 D-Link DIR-651 User Manual Section 3 - Configuration This will allow you to open a single port or a range of ports. Port Forwarding Enter a name for the rule or select an application from the drop-down menu. Select an application and click << to populate the fields. Enter the IP address of ...

28 D-Link DIR-651 User Manual Section 3 - Configuration Enter a name for the rule. You may select a pre- defined application from the drop-down menu and click << . This is the port used to trigger the application. It can be either a single port or a range of ports. Select the protocol of the t...

29 D-Link DIR-651 User Manual Section 3 - Configuration QoS Engine This option is disabled by default. Enable this option for better performance and experience with online games and other interactive applications, such as VoIP. Note:.When.this.option.is.enabled,.hardware.NAT. will.be.disabled.automa...

31 D-Link DIR-651 User Manual Section 3 - Configuration Network Filters Selec t Turn. MAC. Filtering. Off , Allow. MAC. addresses.listed.below , or Deny.MAC.addresses. listed.below from the drop-down menu. Enter the MAC address you would like to filter. To find the MAC address on a computer, please ...

32 D-Link DIR-651 User Manual Section 3 - Configuration Access Control Click the Add. Policy button to start the Access Control Wizard. Add Policy: The Access Control section allows you to control access in and out of your network. Use this feature as Parental Controls to only grant access to approv...

35 D-Link DIR-651 User Manual Section 3 - Configuration Select Allow or Deny . Enter the keywords or URLs that you want to allow or deny. Click Save.Settings . Configure Website Filter Below: Website URL/Domain: Website Filters are used to deny LAN computers from accessing specific web sites by the ...

36 D-Link DIR-651 User Manual Section 3 - Configuration Enter a name for the inbound filter rule. Select Allow or Deny . Check to enable rule. Enter the starting IP address. Enter 0.0.0.0 if you do not want to specify an IP range. Enter the ending IP address. Enter 255.255.255.255 if you do not want...

37 D-Link DIR-651 User Manual Section 3 - Configuration SPI (Stateful Packet Inspection, also k nown as dynamic packet filtering) helps to prevent cyber attacks by tracking more state per session. It validates that the traffic passing through the session conforms to the protocol. Note:.When.this.opt...

38 D-Link DIR-651 User Manual Section 3 - Configuration Application Level Gateway Configuration Here you can enable or disable ALG’s. Some protocols and applications require special handling of the IP payload to make them work with network address translation (NAT). Each ALG provides special handlin...

39 D-Link DIR-651 User Manual Section 3 - Configuration Enter the IP address of packets that will take this route. Enter the netmask of the route, please note that the octets must match your destination IP address. Enter your next hop gateway to be taken if this route is used. The route metric is a ...

40 D-Link DIR-651 User Manual Section 3 - Configuration Set the transmit power of the antennas. Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended. This value should remain at its default setting of 2432. If i...

42 D-Link DIR-651 User Manual Section 3 - Configuration UPnP Internet Ping Block Internet Port Speed Multicast Streams To use the Universal Plug and Play (UPnP ™ ) feature click on Enabled . UPNP provides compatibility with network ing equipment, software and peripherals. Unchecking the box will not...

43 D-Link DIR-651 User Manual Section 3 - Configuration Guest Zone Check to enable the Guest Zone feature. The schedule of time when the Guest Zone will be active. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times by clicki...

44 D-Link DIR-651 User Manual Section 3 - Configuration Administrator Settings This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that can access the management interface through the web browser. The accounts are adm...

45 D-Link DIR-651 User Manual Section 3 - Configuration Time Settings Select the Time Zone from the drop-down menu. To select Daylight Saving time manually, select enabled or disabled, and enter a start date and an end date for daylight saving time. NTP is shor t for Network Time Protocol. NTP synch...

46 D-Link DIR-651 User Manual Section 3 - Configuration SysLog The Broadband Router keeps a running log of events and activities occurring on the Router. You may send these logs to a SysLog server on your network. Enable Logging to SysLog Server: SysLog Server IP Address: Check this box to send the ...

47 D-Link DIR-651 User Manual Section 3 - Configuration Email Settings The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address. Enable Email Notification: From Email Address: To Email Address: SMTP Server Address: SMTP...

48 D-Link DIR-651 User Manual Section 3 - Configuration Us e t h i s o p t i o n to s ave t h e c u r re nt ro u te r configuration settings to a file on the hard disk of the computer you are using. First, click the Save button. You will then see a file dialog, where you can select a location and fi...

49 D-Link DIR-651 User Manual Section 3 - Configuration Click on Check. Now to find out if there is an updated firmware; if so, download the new firmware to your hard drive. After you have downloaded the new firmware, click Browse to locate the firmware update on your hard drive. Click Upload to com...

50 D-Link DIR-651 User Manual Section 3 - Configuration Dynamic Domain Name System is a method of keeping a domain name linked to a changing IP Address. Check the box to enable DDNS. Select your DDNS provider from the drop-down menu or type it in the box. Enter the Host Name that you registered with...

51 D-Link DIR-651 User Manual Section 3 - Configuration The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address or host name that you wish to Ping and click Ping . The results of your ping attempts will be displayed here. System Check Ping Test: Ping...

52 D-Link DIR-651 User Manual Section 3 - Configuration Enter a name for your new schedule. Select a day, a range of days, or All Week to include every day. Check 24hrs or enter a start and end time for your schedule. The list of schedules will be listed here. Click the Edit icon to make changes or ...

53 D-Link DIR-651 User Manual Section 3 - Configuration This page displays the current information for the DIR-651. It will display the LAN, WAN (Internet), and Wireless information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be displ...

54 D-Link DIR-651 User Manual Section 3 - Configuration Log Log Options: Refresh: Clear: Email Now: Save Log: You can select the types of messages that you want to display from the log. System Activity, Debug Information, Attacks, Dropped Packets, and Notice messages can be selected. Click Apply.Log...

55 D-Link DIR-651 User Manual Section 3 - Configuration Stats The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DIR-651 on both the Internet and the LAN ports. The traffic counter will reset if the device is rebooted.

56 D-Link DIR-651 User Manual Section 3 - Configuration Internet Sessions

57 D-Link DIR-651 User Manual Section 3 - Configuration The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. Wireless

58 D-Link DIR-651 User Manual Section 3 - Configuration Support

59 D-Link DIR-651 User Manual Section 4 - Security Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DIR-651 offers the following types of security: • WPA2 ™ (Wi-Fi Protected Access 2) • WPA2-PSK (Pre-Shared Key) • WPA ...

60 D-Link DIR-651 User Manual Section 4 - Security Wireless Security Setup Wizard To run the security wizard, click on Setup at the top and then click Launch. Wireless.Security.Setup.Wizard . Click Next to continue.

65 D-Link DIR-651 User Manual Section 4 - Security Connect to a Wireless Network Windows® 7 It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to know the sec...

68 D-Link DIR-651 User Manual Section 5 - Connecting to a Wireless Network Windows Vista® Windows Vista users may use the built-in wireless utility. If you are using another company’s utility or Windows ® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wi...

69 D-Link DIR-651 User Manual Section 5 - Connecting to a Wireless Network Configure Wireless Security It is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If you are joining an existing network, you will need to k...

71 D-Link DIR-651 User Manual Section 5 - Connecting to a Wireless Network Windows® XP Windows XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack 2 users. If you are using another company’s utility or Windows 2000, please refe...

74 D-Link DIR-651 User Manual Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DIR-651. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows ® XP. ...

78 D-Link DIR-651 User Manual Appendix A - Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link...

81 D-Link DIR-651 User Manual Appendix A - Wireless Basics There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router. • Ad-Hoc – Directly connecting to another computer, for peer-to-peer communication, using wireless netwo...

82 D-Link DIR-651 User Manual Appendix B - Networking Basics Networking Basics Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, pl...

84 D-Link DIR-651 User Manual Appendix C - Technical Specifications Technical Specifications Standards • IEEE 802.11n • IEEE 802.11g • IEEE 802.3 • IEEE 802.3u Security • WPA-Personal • WPA2-Personal • WPA-Enterprise • WPA2-Enterprise Wireless.Signal.Rates* • 300Mbps • 12Mbps . • 108Mbps • 11Mbps • ...

85 D-Link DIR-651 User Manual Appendix D - Contacting Technical Support Contacting Technical Support U.S. and Canadian customers can contact D-Link technical support through our web site or by phone. Before you contact technical support, please have the following ready: • Model number of the product...

86 D-Link DIR-651 User Manual Appendix E - Warranty Warranty Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty: • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributo...

92 D-Link DIR-651 User Manual Appendix F - Registration Version 1.0 January 25, 2011 Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Registration