D-Link DGS-1210-48 - Manuals

Page 3 - D-Link Web Smart Switch User Manual; Table of Contents

Table of Contents D-Link Web Smart Switch User Manual i Table of Contents Table of Contents ............................................................................................................................................. i Intended Readers ..................................................

Page 4 - ii

Table of Contents D-Link Web Smart Switch User Manual ii Tool Bar > Smart Wizard .............................................................................................................................. 22 Tool Bar > Online Help ...............................................................

Page 5 - iii

Table of Contents D-Link Web Smart Switch User Manual iii Security > Port Security ............................................................................................................................ 63 Security > DoS Attack Prevention .....................................................

Page 6 - iv

Table of Contents D-Link Web Smart Switch User Manual iv Fast Ethernet Technology .......................................................................................................................... 100 Switching Technology .........................................................................

Page 7 - Intended Readers; NOTE; Safety Instructions; CAUTION

錯誤 ! 找不到參照來源。 D-Link Web Smart Switch User Manual 1 Intended Readers This guide provides instructions to install the D-Link Gigabit W eb Smart Switch DGS-1210-16/24/48, how to configure Web-based Management step-by-step. NOTE: The model you have purchased may appear slightly different from the illus...

Page 8 - Product Introduction; General Precautions for Rack-Mountable Products

Product Introduction D-Link Web Smart Switch User Manual 2 2 o An object has fallen into the product. o The product has been exposed to water. o The product has been dropped or damaged. o The product does not operate correctly when you follow the operating instructions. • Keep your system away from ...

Page 9 - Ensure that proper airflow is provided to components in the rack.; Protecting Against Electrostatic Discharge

Product Introduction D-Link Web Smart Switch User Manual 3 3 • Systems are considered to be components in a rack. Thus, "component" refers to any system as well as to various peripherals or supporting hardware. • Before working on the rack, make sure that the stabilizers are secured to the r...

Page 10 - Flexible Port Configurations.

Product Introduction D-Link Web Smart Switch User Manual 4 4 1 Product Introduction Thank you and congratulations on your purchase of D-Link Web Smart Switch Products. D-Link's next generation Web Smart Ethernet switch series blends plug-and-play simplicity with exceptional value and reliability for...

Page 11 - The Mini-GBIC ports should use UL recognized Optical; Rear Panel; The power port is where to connect the AC power cord.; Front Panel

Product Introduction D-Link Web Smart Switch User Manual 5 5 DGS-1210-16 16-Port 10/100/1000Mbps plus 4 SFP Slot W eb Smart Switch. Front Panel Figure 1.1 – DGS-1210-16 Front Panel Power LED : The Power LED lights up when the Switch is connected to a power source. Port Link/Act/Speed LED (1-20): The...

Page 12 - Connect the supplied AC power cable to this port.; changes will be lost.

Product Introduction D-Link Web Smart Switch User Manual 6 6 Port Link/Act/Speed LED (1-28): The Link/Act/Speed LED flashes, which indicates a network link through the corresponding port. Blinking indicates that the Switch is either sending or receiving data to the port. When a port has an amber lig...

Page 14 - Hardware Installation; Step 2: Switch Installation; Desktop or Shelf Installation; Figure 2.1 – Attach the adhesive rubber pads to the bottom; Rack Installation; Figure 2.2 – Attach the mounting brackets to the Switch

Hardware Installation D-Link Web Smart Switch User Manual 8 8 2 Hardware Installation This chapter provides unpacking and installation information for the D-Link Web-Smart Switch. Step 1: Unpacking Open the shipping carton and carefully unpack its contents. Please consult the packing list located in...

Page 15 - Figure 2.3 – Mount the Switch in the rack or chassis; Step 3: Plugging in the AC Power Cord with Power Cord Clip

Hardware Installation D-Link Web Smart Switch User Manual 9 9 Then, use the screws provided with the equipment rack to mount the switch in the rack. Figure 2.3 – Mount the Switch in the rack or chassis Please be aware of following safety Instructions when installing: A) Elevated Operating Ambient - ...

Page 16 - Figure 2.4 – Insert Tie Wrap to the Switch; B) Plug the AC power cord into the power socket of the Switch.; Figure 2.5 – Connect the power cord to the Switch; C) Slide the Retainer through the Tie Wrap until the end of the cord.; Figure 2.6 – Slide the Retainer through the Tie Wrap

Hardware Installation D-Link Web Smart Switch User Manual 1 1 0 0 Figure 2.4 – Insert Tie Wrap to the Switch B) Plug the AC power cord into the power socket of the Switch. Figure 2.5 – Connect the power cord to the Switch C) Slide the Retainer through the Tie Wrap until the end of the cord. Figure 2...

Page 17 - Figure 2.7 – Circle around the power cord; E) Fasten the tie of the Retainer until the power cord is secured.; Figure 2.8 – Secure the power cord

Hardware Installation D-Link Web Smart Switch User Manual 1 1 1 1 D) Circle the tie of the Retainer around the power cord and into the locker of the Retainer. Figure 2.7 – Circle around the power cord E) Fasten the tie of the Retainer until the power cord is secured. Figure 2.8 – Secure the power co...

Page 18 - Figure 2.9 – Plugging the switch into an outlet; Power Failure

Hardware Installation D-Link Web Smart Switch User Manual 1 1 2 2 Figure 2.9 – Plugging the switch into an outlet As a precaution, the switch should be unplugged in case of power failure. W hen power is resumed, plug the switch back in. Power Failure

Page 19 - Getting Started; Management Options; Supported Web Browsers; Figure 3.1 – Connected Ethernet cable

Getting Started D-Link Web Smart Switch User Manual 1 1 3 3 3 Getting Started This chapter introduces the management interface of D-Link Web-Smart Switch. Management Options The D-Link Web Smart Switch can be managed through any port on the device by using the Web-based Management. Each switch must ...

Page 20 - Login Web-based Management; Figure 3.3 – Logon Dialog Box; Smart Wizard; Exit; Configuration

Getting Started D-Link Web Smart Switch User Manual 1 1 4 4 In order to login and configure the switch via an Ethernet connection, the PC must have an IP address in the same subnet as the switch. For example, if the switch has an IP address of 10.90.90.90 , the PC should have an IP address of 10.x.y...

Page 21 - Smart Wizard Configuration; Figure 4.1 – IP Information in Smart Wizard

Configuration D-Link Web Smart Switch User Manual 1 1 5 5 4 Configuration The features and functions of the D-Link Web Smart Switch can be configured for optimum use through the Web-based Management Utility. Smart Wizard Configuration After a successful login, the Smart Wizard will guide you through...

Page 22 - Type the desired new password in the; Password; field and again in the; Confirm Password; field, then click; Next; button to the; SNMP; Figure 4.2 – Password in Smart Wizard

Configuration D-Link Web Smart Switch User Manual 1 1 6 6 Type the desired new password in the Password field and again in the Confirm Password field, then click the Next button to the SNMP setting page. Password Figure 4.2 – Password in Smart Wizard

Page 23 - Disabled; Enabled; Figure 4.3 – SNMP in Smart Wizard; IP Address; Figure 4.4 – Confirm the changes of IP address in Smart Wizard

Configuration D-Link Web Smart Switch User Manual 1 1 7 7 The SNMP Setting allows you to quickly enable or disable the SNMP function. The default SNMP Setting is Disabled . Click Enabled and then click Apply to make it effective. SNMP Figure 4.3 – SNMP in Smart Wizard NOTE: Changing the system IP ad...

Page 24 - Web-based Management; Function Tree; Tool Bar

Configuration D-Link Web Smart Switch User Manual 1 1 8 8 Web-based Management After clicking the Exit button in Smart Wizard, you will see the screen below: Figure 4.5 – Web-based Management The above image is the W eb-based Management screen. The three main areas are the Tool Bar on top, the Funct...

Page 25 - Tool Bar > Save Menu; The Save Menu provides Save Configuration and Save Log functions.; Figure 4.6 – Save Menu; Save Configuration; Figure 4.7 – Save Configuration; Save Log; Figure 4.8 – Save Log; Tool Bar > Tools Menu; Figure 4.9 – Tools Menu; Reset

Configuration D-Link Web Smart Switch User Manual 1 1 9 9 Tool Bar > Save Menu The Save Menu provides Save Configuration and Save Log functions. Figure 4.6 – Save Menu Select to save the entire configuration changes you have made to the device to switch’s non-volatile RAM. Save Configuration Figu...

Page 26 - Figure 4.12 – Tools Menu > Reboot Device

Configuration D-Link Web Smart Switch User Manual 2 2 0 0 Provide a safe way to reboot the system. Click Apply to restart the Switch. Reboot Device Figure 4.12 – Tools Menu > Reboot Device Allow the current configuration settings to be saved to a file (not including the password), and if necessar...

Page 27 - Figure 4.14 – Tools Menu > Firmware Backup and Upgrade

Configuration D-Link Web Smart Switch User Manual 2 2 1 1 Figure 4.14 – Tools Menu > Firmware Backup and Upgrade HTTP: Backup or upgrade the firmware to or from your local PC drive. Click Backup to save the firmware to your disk. Click Browse to browse your inventories for a saved firmware file. ...

Page 28 - TFTP Server IP Address; Tool Bar > Smart Wizard; User Guide; Figure 4.16 – Online Help

Configuration D-Link Web Smart Switch User Manual 2 2 2 2 TFTP: Install the language pack from a remote TFTP server. Specify TFTP Server IP Address with IPv4 address and TFTP File Name for the language file you want to install. Click Add after selecting the language pack file you want to install. To...

Page 29 - Figure 4.17 – Available settings in the Function Tree; Device Information

Configuration D-Link Web Smart Switch User Manual 2 2 3 3 Function Tree All configuration options on the Switch are accessed through the Function Tree. Click the setup item that you want to configure. The following sections provide more detailed description of each feature and function. Figure 4.17 ...

Page 30 - Figure 4.18 – Device Information

Configuration D-Link Web Smart Switch User Manual 2 2 4 4 Figure 4.18 – Device Information It also offers an overall status of common software features: RSTP: Click Settings to link to L2 Functions > Spanning Tree > STP Global Settings. Default is disabled. Port Mirroring: Click Settings to li...

Page 31 - Figure 4.20 – System > Password Access Control

Configuration D-Link Web Smart Switch User Manual 2 2 5 5 IP Information: There are three ways for the Switch to obtain an IP address: Static, DHCP (Dynamic Host Configuration Protocol) and BOOTP. When using the static mode, the IP Address , Subnet Mask and Gateway can be manually configured. When u...

Page 32 - Auto; Figure 4.22 – System > DHCP Auto Configuration

Configuration D-Link Web Smart Switch User Manual 2 2 6 6 Speed: Gigabit Fiber connections can operate in 1000M Full , Auto or Disabled . Copper connections can operate in Forced Mode settings ( 1000M Full , 100M Full , 100M Half , 10M Full , 10M Half ), Auto , or Disabled . 100M Fiber connections s...

Page 35 - Figure 4.27 – System >DNS Resolver Settings

Configuration D-Link Web Smart Switch User Manual 2 2 9 9 Figure 4.26 – System > IEEE802.3az EEE Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. State: Enabled or Disabled the IEEE802.3az EEE for the specified ports. By default, all po...

Page 37 - VLAN > Voice VLAN > Voice VLAN Global Settings; Figure 4.32 – VLAN > Voice VLAN > Voice VLAN Global Settings; Auto Detection

Configuration D-Link Web Smart Switch User Manual 3 3 1 1 Figure 4.30 – Configuration > 802.1Q VLAN PVID The 802.1Q Management VLAN setting allows user to transfer the authority of the switch from the default VLAN to others created by users. This allows managing the whole network more flexible. V...

Page 39 - Apply

Configuration D-Link Web Smart Switch User Manual 3 3 3 3 Figure 4.33 – VLAN > Voice VLAN > Voice VLAN Port Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Auto Detection: Switch will add ports to the voice VLAN automatically if it ...

Page 40 - Figure 4.35 – VLAN > Auto Surveillance VLAN; Low

Configuration D-Link Web Smart Switch User Manual 3 3 4 4 Similar as Voice VLAN, Auto Surveillance VLAN is a feature that allows you to automatically place the video traffic from D-Link IP cameras to an assigned VLAN to enhance the IP surveillance service. W ith a higher priority and individual VLAN...

Page 41 - Figure 4.36 – L2 Functions > Jumbo Frame; Figure 4.37 – L2 Functions > Port Mirroring

Configuration D-Link Web Smart Switch User Manual 3 3 5 5 Click Add to create a new surveillance component and Refresh to refresh the Auto Surveillance VLAN summary table. D-Link Gigabit Web Smart Switches support jumbo frames (frames larger than the Ethernet frame size of 1536 bytes) of up to 13,00...

Page 42 - Figure 4.38 – L2 Functions > Loopback Detection

Configuration D-Link Web Smart Switch User Manual 3 3 6 6 Figure 4.38 – L2 Functions > Loopback Detection Loopback Detection: Click to enable or disable loopback detection. The default is Disabled . Mode: Specifies Port-based or VLAN-based mode. If the port-based mode is selected, the loop happen...

Page 43 - Figure 4.39 – L2 Functions > MAC Address Table > Static Mac Address

Configuration D-Link Web Smart Switch User Manual 3 3 7 7 Figure 4.39 – L2 Functions > MAC Address Table > Static Mac Address To initiate the removal of auto-learning for any of the uplink ports, click Enabled to enable this feature, and then select the port(s) for auto learning to be enabled....

Page 44 - L2 Functions > Spanning Tree > STP Global Settings; By default, Spanning Tree Protocol is

Configuration D-Link Web Smart Switch User Manual 3 3 8 8 Figure 4.40 – L2 Functions > MAC Address Table > Dynamic Forwarding Table The Switch implements two versions of the Spanning Tree Protocol, the Rapid Spanning Tree Protocol (RSTP) as defined by the IEEE 802.1D-2004 specification and a v...

Page 45 - Figure 4.41 – L2 Functions > Spanning Tree > STP Global Settings; RSTP

Configuration D-Link Web Smart Switch User Manual 3 3 9 9 Figure 4.41 – L2 Functions > Spanning Tree > STP Global Settings STP Version: You can choose RSTP or STP Compatible. The default setting is RSTP . Bridge Priority: This value, between 0 and 61440, specifies the priority for forwarding p...

Page 46 - Figure 4.42 – L2 Functions > Spanning Tree > STP Port Settings

Configuration D-Link Web Smart Switch User Manual 4 4 0 0 Figure 4.42 – L2 Functions > Spanning Tree > STP Port Settings From Port/To Port: A consecutive group of ports may be configured starting with the selected port. State: Use the drop-down menu to enable or disable STP by per-port based. ...

Page 47 - Figure 4.43 – L2 Functions > Link Aggregation > Port Trunking

Configuration D-Link Web Smart Switch User Manual 4 4 1 1 Restricted Role: Toggle between True and False to set the restricted role state of the packet. If set to True , the port will never be selected to be the Root port. The default value is False . Restricted TCN: Toggle between True and False to...

Page 48 - Figure 4.44 – L2 Functions > Link Aggregation > LACP Port Settings

Configuration D-Link Web Smart Switch User Manual 4 4 2 2 Figure 4.44 – L2 Functions > Link Aggregation > LACP Port Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Activity: There are two different roles of LACP ports: Active - Acti...

Page 49 - for changes to take effect. A router port configured manually is a; Static Router Port; is dynamically configured by the Switch when query control

Configuration D-Link Web Smart Switch User Manual 4 4 3 3 Figure 4.45 – L2 Functions > Multicast > IGMP Snooping By default, IGMP is Disabled . If enabled, the IGMP Global Settings will need to be entered: Host Timeout (130-153025): This is the interval after which a learned host port entry wi...

Page 50 - Figure 4.46 – L2 Functions > Multicast > IGMP Snooping VLAN Settings; View; Figure 4.47 – L2 Functions > Multicast > IGMP Multicast Entry Table; Delete

Configuration D-Link Web Smart Switch User Manual 4 4 4 4 Figure 4.46 – L2 Functions > Multicast > IGMP Snooping VLAN Settings State: Specify the State to be enabled or disabled. Querier State: D-Link Smart Switch is able to send out the IGMP Queries to check the status of multicast clients. T...

Page 51 - Static

Configuration D-Link Web Smart Switch User Manual 4 4 5 5 Figure 4.48 – L2 Functions > Multicast > MLD Snooping By default, MLD is Disabled . If enabled, the MLD Global Settings will need to be entered: Host Timeout (130-153025): This is the interval after which a learned host port entry will ...

Page 52 - Figure 4.49 – L2 Functions > Multicast > MLD Snooping VLAN Settings; Figure 4.50 – L2 Functions > Multicast > MLD Multicast Entry Table

Configuration D-Link Web Smart Switch User Manual 4 4 6 6 Figure 4.49 – L2 Functions > Multicast > MLD Snooping VLAN Settings State: Specify the State to be enabled or disabled. Querier State: D-Link Smart Switch is able to send out the MLD Queries to check the status of multicast clients. The...

Page 53 - Figure 4.52 – L2 Functions > Multicast > Multicast Filtering Mode

Configuration D-Link Web Smart Switch User Manual 4 4 7 7 Multicast MAC Address: The MAC address of the static source of multicast packets. This must be a multicast MAC address. Port: Allows the selection of ports that will be members of the static multicast group. Member - The port is a static memb...

Page 55 - L2 Functions > LLDP > LLDP Global Settings; W hen this function is; to make the change effective.; L2 Functions > LLDP > LLDP Port Settings

Configuration D-Link Web Smart Switch User Manual 4 4 9 9 LLDP (Link Layer Discovery Protocol) provides IEEE 802.1AB standards-based method for switches to advertise themselves to neighbor devices, as well as to learn about neighbor LLDP devices. SNMP utilities can learn the network topology by obta...

Page 56 - Disabled –

Configuration D-Link Web Smart Switch User Manual 5 5 0 0 Figure 4.56 – L2 Functions > LLDP > LLDP Port Settings From Port/ To Port: A consecutive group of ports may be configured starting with the selected port. Notification State: Specifies whether notification is sent when an LLDP topology ...

Page 58 - Specifies that the LLDP agent should transmit the MAC/PHY; to implement the changes made. Click; Refresh; to refresh the table information.; L2 Functions > LLDP > LLDP Management Address Settings

Configuration D-Link Web Smart Switch User Manual 5 5 2 2 Figure 4.58 – L2 Functions > LLDP > 802.3 Extension TLV Port Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. MAC/PHY Configuration/Status: Specifies that the LLDP agent shoul...

Page 59 - Figure 4.59 – L2 Functions > LLDP > LLDP Management Address Settings; Figure 4.60 – L2 Functions > LLDP > LLDP Management Address Table; Search

Configuration D-Link Web Smart Switch User Manual 5 5 3 3 Figure 4.59 – L2 Functions > LLDP > LLDP Management Address Settings From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Address: Enter the management IPv4 address. Port State: Specify wh...

Page 60 - L2 Functions > LLDP > LLDP Local Port Table; Figure 4.61 – L2 Functions > LLDP > LLDP Local Port Brief Table; Figure 4.62 – L2 Functions > LLDP > LLDP Local Port Normal Table

Configuration D-Link Web Smart Switch User Manual 5 5 4 4 The LLDP Local Port Table window displays LLDP local port information. L2 Functions > LLDP > LLDP Local Port Table Figure 4.61 – L2 Functions > LLDP > LLDP Local Port Brief Table Port: Displays the port number. Port ID Subtype: Di...

Page 61 - Figure 4.63 – L2 Functions > LLDP > LLDP Local Port Detailed Table; to display the detail information of the port.; L2 Functions > LLDP > LLDP Remote Port Table

Configuration D-Link Web Smart Switch User Manual 5 5 5 5 Figure 4.63 – L2 Functions > LLDP > LLDP Local Port Detailed Table This LLDP Remote Port Table page is used to display the LLDP Remote Port Brief Table. Select port number and click Search to display the detail information of the port. ...

Page 62 - Figure 4.64 – L2 Functions > LLDP > LLDP Remote Port Brief Table; To view the more information for a remote port, click the

Configuration D-Link Web Smart Switch User Manual 5 5 6 6 Figure 4.64 – L2 Functions > LLDP > LLDP Remote Port Brief Table To view the more information for a remote port, click the View Normal hyperlink and the following window displays.

Page 63 - Figure 4.65 – L2 Functions > LLDP > LLDP Remote Port Normal Table; To view the detailed information for a remote port, click

Configuration D-Link Web Smart Switch User Manual 5 5 7 7 Figure 4.65 – L2 Functions > LLDP > LLDP Remote Port Normal Table To view the detailed information for a remote port, click View Detailed and the following page displays.

Page 64 - Figure 4.66 – L2 Functions > LLDP > LLDP Remote Port Detailed Table

Configuration D-Link Web Smart Switch User Manual 5 5 8 8 Figure 4.66 – L2 Functions > LLDP > LLDP Remote Port Detailed Table The LLDP Statistics window displays an overview of all LLDP traffic. L2 Functions > LLDP > LLDP Statistics

Page 67 - This drop-down menu allows you to select between; to set the bandwidth control for the selected ports.

Configuration D-Link Web Smart Switch User Manual 6 6 1 1 Figure 4.69 – QoS > Bandwidth Control From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Type: This drop-down menu allows you to select between RX (receive), TX (transmit), and Both . This ...

Page 68 - WRR

Configuration D-Link Web Smart Switch User Manual 6 6 2 2 Figure 4.70 – QoS > 802.1p/DSCP/ToS Select QoS Mode: Specifies the QoS mode to be 802.1p , DSCP or ToS . Queuing Mechanism: Strict Priority - Denoting a Strict scheduling will set the highest queue to be emptied first while the other queue...

Page 70 - Click; for the settings to take effect.; Security > DoS Attack Prevention; Figure 4.74 – Security > DoS Attack Prevention

Configuration D-Link Web Smart Switch User Manual 6 6 4 4 Figure 4.73 – Security > Port Security From Port / To Port: A consecutive group of ports may be configured starting with the selected port. Admin State: Use the drop-down menu to enable or disable Port Security (locked MAC address table fo...

Page 71 - TCP SYN Source Port Less 1024 attacks.; Figure 4.75 – Security > Traffic Segmentation

Configuration D-Link Web Smart Switch User Manual 6 6 5 5 DoS Type Selection: Land Attack - Specifies that the DoS attack prevention type will be set to prevent LAND attacks. Blat Attack -- Specifies that the DoS attack prevention type will be set to prevent BLAT attacks. TCP Tiny Frag Attack - Spec...

Page 72 - Figure 4.76 – Security > Safeguard Engine

Configuration D-Link Web Smart Switch User Manual 6 6 6 6 Forwarding Port Settings: Click to enable or disable the function. Click Apply to implement the changes made. Use the From Port drop-down menu to specify a port or all ports from the Switch, tick the ports under To Port , and click Apply to i...

Page 73 - Figure 4.78 – Security > ARP Spoofing Prevention

Configuration D-Link Web Smart Switch User Manual 6 6 7 7 The ARP Spoofing Prevention function can discard the ARP Spoofing Attack in the network by checking the gratuitous ARP packets and filtering those with illegal IP or MAC addresses. Figure 4.78 – Security > ARP Spoofing Prevention Enter the...

Page 74 - Enable

Configuration D-Link Web Smart Switch User Manual 6 6 8 8 Secure Sockets Layer (SSL) is a security feature that provides a secure communication path between a Web Management host and the Switch W eb UI by using authentication, digital signatures and encryption. These security functions are implement...

Page 79 - Figure 4.86 – Add Access Profile

Configuration D-Link Web Smart Switch User Manual 7 7 3 3 Figure 4.86 – Add Access Profile The steps of adding an access profile are described below: 1) After selecting the Select Profile ID and Select Frame Type ( MAC ACL or IPv4 ACL ), specify attributes like Untagged/Tagged (for MAC), or ICMP/IGM...

Page 86 - Figure 4.93 – Confirmation of Creating Access Profile List

Configuration D-Link Web Smart Switch User Manual 8 8 0 0 Figure 4.93 – Confirmation of Creating Access Profile List NOTE: You cannot select Payload in a MAC ACL, or L2 Header in IP ACL. 3) After the Profile ID has been created, click Continue to go back to the main Access Profile List window. Click...

Page 89 - SHA

Configuration D-Link Web Smart Switch User Manual 8 8 3 3 Figure 4.97 – SNMP > SNMP > SNMP User Table User Name: Enter a SNMP user name of up to 32 characters. Group Name: Specify the SNMP group of the SNMP user. SNMP Version: Specify the SNMP version of the user. Only SNMPv3 encrypts the mess...

Page 92 - Figure 4.104 – SNMP > RMON > RMON Ethernet Statistics Configuration; Add

Configuration D-Link Web Smart Switch User Manual 8 8 6 6 Figure 4.104 – SNMP > RMON > RMON Ethernet Statistics Configuration The RMON Ethernet Statistics Configuration contains the following fields: Index (1 ~ 65535): Indicates the RMON Ethernet Statistics entry number. Port: Specifies the po...

Page 94 - Figure 4.108 – Monitoring > Port Statistics

Configuration D-Link Web Smart Switch User Manual 8 8 8 8 Log and Trap – Indicates that the event is both a log entry and a trap. Community: When SNMP Trap or Log and Trap is selected in Type, enter the community name that has been configured in SNMP Host. Owner: Specifies the device or the user tha...

Page 95 - Figure 4.109 – Monitoring > Port Statistics

Configuration D-Link Web Smart Switch User Manual 8 8 9 9 To view the statistics of individual ports, click one of the linked port numbers for details. Figure 4.109 – Monitoring > Port Statistics Click Back to go back to the previous page. Click Refresh to renew the information. Click Clear to re...

Page 96 - Open in Cable

Configuration D-Link Web Smart Switch User Manual 9 9 0 0 • Open in Cable means the wires of RJ45 cable may be broken, or the other end of the cable is simply disconnected. • Test Failed means some other errors occurred during cable diagnostics. Please select the same port and test again. Cable Faul...

Page 97 - Command Line; Interface; To connect a switch via TELNET:; HyperTerminal; To connect a switch via SSH:; admin; Command Line Interface; Figure 6.1 – Command Prompt; Command

Command Line Interface D-Link Web Smart Switch User Manual 9 9 1 1 5 Command Line Interface The D-Link W eb Smart Switch allows a computer or terminal to perform some basic monitoring and configuration tasks by using the Command Line Interface (CLI) via the TELNET or SSH protocol. To connect a switc...

Page 99 - downlo a d; upload; u plo a d

Command Line Interface D-Link Web Smart Switch User Manual 9 9 3 3 Syntax do wnlo a d { firmwa re_fro mT F T P | c fg_fro mT F T P } <ipa ddr> <pa th_filen a me 64> Description The downlo a d command downloads a firmware file, boot file, or switch configuration file from a TFTP server. P...

Page 100 - config ipif System; c o nfig ipif S y s tem; logout; lo go u t

Command Line Interface D-Link Web Smart Switch User Manual 9 9 4 4 DGS-1210-24:admin#upload firmware_toTFTP 10.90.90.10 RUNTIME Connecting to server................... Done. Upload firmware........................ Done. DGS-1210-24:admin# config ipif System Purpose This command is used to configure ...

Page 101 - ping; reboot; rebo o t

Command Line Interface D-Link Web Smart Switch User Manual 9 9 5 5 DGS-1210-24:admin#logout ********** * Logout * ********** NOTE: Save your configuration changes before logging out. ping Purpose This command is used to test the connectivity between the Switch and other network devices. Syntax <i...

Page 102 - reset config; res et c o nfig; % Device will reboot after reset configuration successfully.; show ipif; s ho w ipif

Command Line Interface D-Link Web Smart Switch User Manual 9 9 6 6 Restrictions None. Example usage: To reboot the Switch: DGS-1210-24:admin#reboot Are you sure you want to proceed with the system reboot?(y/n) y % Device will reboot, please wait a few minutes to re-login. Success. DGS-1210-24:admin#...

Page 103 - show switch; s ho w s witc h; config account admin password; c o nfig a c c o u nt a dmin pa s s wo rd

Command Line Interface D-Link Web Smart Switch User Manual 9 9 7 7 DGS-1210-24:admin#show ipif IP Setting Mode : Static IP Address : 10.90.90.90 Subnet Mask : 255.0.0.0 Default Gateway : ---.---.---.--- DGS-1210-24:admin# show switch Purpose This command is used to display information about the Swit...

Page 104 - save; s a v e; debug info; debu g info

Command Line Interface D-Link Web Smart Switch User Manual 9 9 8 8 DGS-1210-24:admin#config account admin password 1234 DGS-1210-24:admin# save Purpose This command is used to save changes made in the Switch’s configuration to the non-volatile RAM. Syntax s a v e Description The s a v e command save...

Page 105 - Address Hardware Address Type Interface Mapping

Command Line Interface D-Link Web Smart Switch User Manual 9 9 9 9 DGS-1210-24:admin#debug info % segmentation fault log file : File doesn't exist !!! % ARP table : Address Hardware Address Type Interface Mapping ------- ---------------- ---- --------- ------- 10.0.0.0 FF-FF-FF-FF-FF-FF ARPA System ...

Page 106 - Appendix A; - Ethernet Technology; Appendix A - Ethernet Technology; Gigabit Ethernet Technology

Appendix A - Ethernet Technology D-Link Web Smart Switch User Manual 1 1 0 0 0 0 Appendix A - Ethernet Technology This chapter will describe the features of the D-Link Web Smart Switch and provide some background information about Ethernet/Fast Ethernet/Gigabit Ethernet switching technology. Gigabit...

Page 107 - Appendix B; Technical; Appendix B - Technical Specifications; Hardware Specifications

Appendix B - Technical Specifications D-Link Web Smart Switch User Manual 1 1 0 0 1 1 Appendix B - Technical Specifications Hardware Specifications Key Components / Performance Switching Capacity: - DGS-1210-16: 40Gbps - DGS-1210-24: 56Gbps - DGS-1210-48: 96Gbps Max. Forwarding Rate - DGS-1210-16: 2...