Page 2 - 5 Volvo Drive
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc.
Page 3 - Programming with VisionTools Pro-e; Contents
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Contents QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 1 Introduction ............................................................................................................................... 1 Features and Functions ..............................
Page 5 - Introduction; Features and Functions; The Crestron; Functional Summary; One RGBHV monitor pass-through connector
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Introduction Features and Functions The Crestron ® QuickMedia Matrix Switcher/Mixer, QM-MD5x1 (hereinafter referred to as MD5x1) is part of the Crestron MediaManager line of network devices, room control ...
Page 6 - Cresnet; Switching
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 Functional Summary (continued) • Auto Compensation automatically recalls microphone EQ settings, source compensation settings and peak and boost preset values of multiple QM origination points when acting as an endpoint • Stores and transmits audio...
Page 7 - Functional Diagram of the QM-MD5x1
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer The following diagram represents the switching and mixing capabilities of the MD5x1. The MD5x1 can be operated locally (local mode) using buttons on the front panel, or remotely from a control system (system mode). For more information, refer to “O...
Page 8 - QM-MD5x1 Connected with Other QM-Switching Devices; Applications
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 A MD5x1 can also be connected to another MD5x1, a QM-MD8x8 switcher, a QM-MD4x2 switcher or any combination of QM switching devices. This provides additional inputs for one MD5x1 as shown in the following diagrams. QM-MD5x1 Connected with Other QM-...
Page 9 - The following diagram shows an MD5x1 in a lectern application.; QM Solution in Lectern using QM-MD5x1
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer The following diagram shows an MD5x1 in a lectern application. QM Solution in Lectern using QM-MD5x1 For more information on this and other QM applications, refer to the latest revision of the Crestron MediaManager Control, Switching and Management...
Page 10 - Specifications; Specifications for the QM-MD5x1 are listed in the following table.; QM-MD5x1 Specifications; SPECIFICATION DETAILS
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 Specifications Specifications for the QM-MD5x1 are listed in the following table. QM-MD5x1 Specifications SPECIFICATION DETAILS Cresnet Power Usage 25 Watts (1.04 Amp @ 24 VDC) Default Net ID 1D Control System Update Files 2-Series Control System 1...
Page 11 - Physical Description
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1 Specifications (continued) SPECIFICATION DETAILS Audio Input Details Format Maximum Line-level Input Input Impedance Bandwidth Stereo, unbalanced 2 V RMS 10k Ohm 20 Hz to 20k Hz Audio Output Performance Max. Line-level output Output Impeda...
Page 12 - QM-MD5x1 Physical Views
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QM-MD5x1 Physical View (Front) QM-MD5x1 Physical View (Rear) QM-MD5x1 Physical Views 17.03 in (43.24 cm) 7.15 in (18.17 cm) 16.92 in (42.98 cm) 1.70 in (4.32 cm) 6.44 in (16.35 cm) 8 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - ...
Page 13 - Ports; Video Input Connections; AUD; Audio Input Connections; RGB
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Ports All connections to the MD5x1 are made through the ports on the rear panel. Refer to the illustrations and descriptions that follow. NOTE: Interface connectors for the audio and NET ports are provided with the MD5x1. VIDEO IN The MD5x1 contain...
Page 14 - RGB DB15HD Pin Assignments; 5 is located on the bottom-left of the connector.; RJ-45 Pin Assignments; Use Crescat-QM, or good quality CAT5E / CAT6 cable to make QM
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 RGB DB15HD Pin Assignments PIN FUNCTION PIN FUNCTION 1 Red Video 9 No Connect 2 Green Video 10 Ground 3 Blue Video 11 No Connect 4 Reserved 12 Monitor Sense 1 5 Ground 13 Horizontal Sync 6 Red Ground 14 Vertical Sync 7 Green Ground 15 Monitor Sense...
Page 15 - AUDIO OUT; Speech Output Connections; Program Audio Output Connections (left to right); PIN NAME; OUT; For additional information, refer to “Hardware Hookup” on page 22.; NET
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer AUDIO OUT The line-level audio output follows the output of the QM output port. The output consists of a 3-position mini-terminal block connector for speech output and a 5-position mini-terminal block connector for stereo program audio output. This...
Page 16 - AUDIO BREAK; LOCAL; ENTER
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 Illumination indicates that the SIMPL Windows program currently loaded has a network device defined at the same Net ID as the MD5x1. The LED flashes when communication with the processor occurs. AUDIO BREAK When operating in the local mode, press t...
Page 18 - Industry Compliance; Setup; Network Wiring
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 Industry Compliance As of the date of manufacture, the QM-MD5x1 has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of th...
Page 19 - Possible equipment damage if miswired.; Resistance Equation; L x P; Wire Gauge Values; WIRE GAUGE
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer CAUTION: Possible equipment damage if miswired. NOTE: When installing network wiring, refer to the latest revision of the wiring diagram(s) appropriate to your specific system configuration, available from the Crestron website. NOTE: Do not power u...
Page 20 - QuickMedia Wiring; Do not untwist the two wires in a single pair for more than 1/3-1/2”
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QuickMedia Wiring The Crestron QuickMedia cable (sold under the name “Crescat-QM”) contains one CAT5E cable and one Cresnet cable in siamese jackets. Installation of any QM device is as simple as installing one set of QM wires from the output of on...
Page 21 - Quick Media Video Signals on CAT5E; WIRE; for making Cresnet connections.
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer The following diagram illustrates how composite, S-video, and RGB video signals are transmitted over the CAT5E wire. Quick Media Video Signals on CAT5E NOTE: When transmitting S-video or composite video, luminance uses the green video pathway, chro...
Page 22 - Identity Code; Current Network Devices
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 Identity Code All equipment and user interfaces within the network require a unique identity code (Net ID). These codes are two-digit hexadecimal numbers from 03 to FE. The Net ID of each unit must match an ID code specified in the SIMPL Windows pr...
Page 23 - The new Net ID code may also be verified by selecting; Network Devices; Set Net ID by TSID; Functions | Assign Cresnet ID by Serial; . The “Set Net ID by TSID” window appears. The window is first; Search for Touch Settable Devices; “Set Net ID by TSID” Window
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer NOTE: The new Net ID code may also be verified by selecting Diagnostic | Report Network Devices in the Viewport (alternately, select F4 ). 10. Repeat this procedure for each additional network device requiring a Net ID change. Method B (Touch Setta...
Page 24 - OK; Serial Number to TSID Conversion; Functions | Serial Number; “Serial Number to TSID Conversion Tool” Window
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 5. Enter either the serial number or TSID number of the device that requires a change. The list scrolls to and highlights the device listing. The listing should show the device’s default Cresnet ID (a.k.a. Net ID). 6. Enter the Cresnet ID that the ...
Page 25 - Rack Mounting; To prevent bodily injury when mounting or servicing this unit in a; Ear Attachment for Rack Mounting
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Rack Mounting WARNING: To prevent bodily injury when mounting or servicing this unit in a rack, take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: When mounting this unit ...
Page 26 - Stacking; Hardware Hookup; Hardware Connections for the QM-MD5x1 (Back of the Unit is Shown); The MD5x1 can only be powered by the 4-position terminal block
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 Stacking Four "feet" are provided with the MD5x1 so that if the unit is not rack mounted, the rubber feet can provide stability when the unit is placed on a flat surface or stacked. These feet should be attached prior to the hookup procedur...
Page 27 - Programming Software; Have a question or comment about Crestron software?; Setup is easy thanks to Crestron’s Windows
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer NOTE: The Y and Z Cresnet data lines from the network are connected to the NET connector, which is internally wired to the 4-position mini-terminal block connector at each QM connector. The MD5x1 can transmit balanced or unbalanced audio signals. R...
Page 28 - software for creating and fine-tuning a QuickMedia system.; Earliest Version Software Requirements for the PC; While SIMPL Windows can be used to program the MD5x1, it is; NOTE
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 NOTE: Crestron recommends the use of SystemBuilder and Digital Media Tools software for creating and fine-tuning a QuickMedia system. NOTE: Crestron recommends that you use the latest software to take advantage of the most recently released feature...
Page 29 - QM-RMCRX System View; C2Net-Device Slot in Configuration Manager
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer NOTE : In the following description, the QM-RMCRX control system is used. This section explains how to create a SIMPL Windows program that includes an MD5x1. Configuration Manager is where programmers “build” a Crestron control system by selecting ...
Page 30 - is dragged into the upper pane of; C2Net Device, Slot 5; Setting the Net ID in Device Settings; Net ID; “QM-MD5x1 Device Settings” Window; QM-MD5x1 Symbols in Programming Manager
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 NOTE: The first MD5x1 in a system is preset with a Net ID of 1D when its symbol is dragged into the upper pane of System Views . Additional units are assigned different Net ID numbers as they are added. C2Net Device, Slot 5 Setting the Net ID in De...
Page 31 - Slot 1: Input Switching
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer The programming symbol in slot ( Slot 1 ) is for programming the switching functions of the MD5x1. The second slot ( Slot 2 ) is for programming the MD5x1’s microphone controls. Slot 3 is for programming the mixer (EQ) settings for the microphone s...
Page 32 - By programming the digital and analog signals, or
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 The Input Switching symbol provides two methods for sending switching commands to the MD5x1: 1. By programming the digital and analog signals, or 2. By programming serial strings. The two methods should not be used simultaneously. While using the S...
Page 33 - QM-MD5x1, Slot 1 Digital Input Signal Descriptions; INPUT DESCRIPTION
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1, Slot 1 Digital Input Signal Descriptions INPUT DESCRIPTION VideoEnter Enables the video source select analogs, for as long as the input remains high. For most applications this input should be set high, which will allow all video sources ...
Page 34 - QM-MD5x1, Slot 1 Analog Input Signal Descriptions
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QM-MD5x1, Slot 1 Analog Input Signal Descriptions INPUT DESCRIPTION QMLinkPeakToSave Sets the peaking value that will be saved to the preset given by QMLinkPreset#ToSave when SaveQMLinkPreset is held high. Peaking improves the transmission of the e...
Page 35 - VideoInpSelect
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1, Slot 1 Analog Input Signal Descriptions (continued) INPUT DESCRIPTION QMLink5Preset# [This signal is operative only if Auto Compensation is NOT enabled.] Sets the preset number that will be recalled when RecallQMLink5Preset is held high. ...
Page 36 - When programming the MD; Signal Values for VideoInpSelect Selections
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QM-MD5x1, Slot 1 Analog Input Signal Descriptions (continued) INPUT DESCRIPTION Boost_5 Applies boost at IN 5. Boost improves the transmission of the encoded audio signal over cable lengths up to 300 feet. Valid peaking boost values range from 0% t...
Page 37 - QM-MD5x1, Slot 1 Serial Input Signal Descriptions; QM-MD5x1, Slot 1 Digital Output Signal Descriptions; button on the unit. The; OUTPUT DESCRIPTION; Indicates the boost level currently applied at IN 5.
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1, Slot 1 Serial Input Signal Descriptions INPUT DESCRIPTION Control$ Accepts serial commands for routing signals. Allows users to query the switch for current status. Refer to “Appendix: Serial Protocol” on page 64. NOTE: When programming t...
Page 38 - Returned values match values that were selected for the; and; AudioInpSelect; QM-MD5x1, Slot 1 Serial Output Signal Descriptions; Slot 2: Remote Microphone Controls; Compensation is enabled (via the; EnableAudioAutoComp; input on Slot 05 –
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 NOTE: Returned values match values that were selected for the VideoInpSelect and AudioInpSelect inputs. QM-MD5x1, Slot 1 Serial Output Signal Descriptions OUTPUT DESCRIPTION Control-FB$ Sends out unsolicited changes that occur within the MD5x1 and ...
Page 39 - The symbol image has been altered to fit the page.; QM-MD5x1, Slot 2 Digital Input Signal Descriptions; MicMixEQPreset
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Remote Microphone Controls Symbol (Slot 2) in SIMPL Windows Programming Manager NOTE: The symbol image has been altered to fit the page. QM-MD5x1, Slot 2 Digital Input Signal Descriptions INPUT DESCRIPTION RecallMicMixEQPreset Recalls the Mic Mix E...
Page 40 - QM-MD5x1, Slot 2 Analog Input Signal Descriptions; SaveMicEQPreset; is held
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QM-MD5x1, Slot 2 Analog Input Signal Descriptions INPUT DESCRIPTION Mic1EQ1ToSave through Mic1EQ4ToSave Sets the four MIC 1 EQ trims (at 160Hz, 500Hz, 1.2kHz, and 3kHz) that will be saved when SaveMicEQPreset is held high. The preset will be saved ...
Page 41 - Mic Mix; General Audio Controls
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Slot 3: Mixer The MD5x1 provides one QM input, which contains up to two remote microphone channels (MIC A-1 and MIC A-2). At the MD5x1 output is a microphone mixer. The microphone mixer can mix MIC A-1 and MIC A-2. Before mixing, 4-band equalizatio...
Page 42 - Mixer Symbol (Slot 3) in SIMPL Windows Programming Manager; QM-MD5x1, Slot 3 Digital Input Signal Descriptions; SaveMicMixerPreset
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 Mixer Symbol (Slot 3) in SIMPL Windows Programming Manager NOTE: The symbol image has been altered to fit the page. QM-MD5x1, Slot 3 Digital Input Signal Descriptions INPUT DESCRIPTION SaveMicMixerPreset Saves the two mixing levels for remote MIC A...
Page 43 - ...ToAudioOut...; QM-MD5x1, Slot 3 Analog Input Signal Descriptions
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1, Slot 3 Digital Input Signal Descriptions (continued) INPUT DESCRIPTION RecallMicMixerPreset Recalls the preset given by MicMixerPreset# when the input is held high. Recalling a preset adjusts the mixing levels for remote MIC A-1 and MIC A...
Page 44 - MicMixToAudioOutSp
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QM-MD5x1, Slot 3 Analog Input Signal Descriptions (continued) INPUT DESCRIPTION MicA-2ToMicMix Sets the mixing level for remote MIC A-2. Remote MIC A-2 is mixed with remote MIC A-1. The resulting “Mic Mix” is routed to the MIC1 channel of OUT and t...
Page 45 - RightToAudioOutSp
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1, Slot 3 Analog Input Signal Descriptions (continued) INPUT DESCRIPTION RightToAudioOutSp Sets the mixing level for the Right program channel of the selected audio source (audio source selection is accomplished via the Input Switching modul...
Page 46 - RightToAudioOutL
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QM-MD5x1, Slot 3 Analog Input Signal Descriptions (continued) INPUT DESCRIPTION RightToAudioOutL Sets the mixing level for the Right program channel of the selected audio source (audio source selection is accomplished via the Input Switching module...
Page 47 - RightToAudioOutR; MicMixToAudioOutSp_F
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1, Slot 3 Analog Input Signal Descriptions (continued) INPUT DESCRIPTION RightToAudioOutR Sets the mixing level for the Right program channel of the selected audio source (audio source selection is accomplished via the Input Switching module...
Page 49 - of; Graphic EQ Symbol (Slot 4) in SIMPL Windows Programming Manager
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer • 12 bands parametric (0 bands graphic). In this mode, all of the filters are used for parametric equalization. Programming the graphic equalizer through SIMPL Windows may override the DMT Software settings. For example, if the 12-band parametric e...
Page 50 - QM-MD5x1, Slot 4 Digital Input Signal Descriptions; AudioOutFilterPreset#; QM-MD5x1, Slot 4 Analog Input Signal Descriptions; RecallAudioOutFilterPreset
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QM-MD5x1, Slot 4 Digital Input Signal Descriptions INPUT DESCRIPTION SaveAudioOutTrimPreset Saves the 30 trim values to the trim preset given by the analog signal AudioOutTrimPreset# when the input is held high. The trims are defined by the AudioOu...
Page 51 - QM-MD5x1, Slot 4 Analog Output Signal Descriptions; Slot 5: General Audio Controls; Each channel has controls for muting, volume, and tone functions.; do not
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1, Slot 4 Analog Input Signal Descriptions INPUT DESCRIPTION AudioOutSpTrimBand1 through AudioOutSpTrimBand10 Sets the 10 trim values for the SP channel of AUDIO OUT. Valid analog values range from -100d (-10 dB) to +100d (+10 dB), adjustabl...
Page 52 - Firmware Requirements for Auto Compensation; DEVICE FUNCTION MINIMUM REQUIRED
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 Auto Compensation requires the following firmware to be installed on QM origination points and QM receivers: Firmware Requirements for Auto Compensation DEVICE FUNCTION MINIMUM REQUIRED FIRMWARE VERSION QM-RMCRX Endpoint C2-V3.137.CUZ or later QM-W...
Page 54 - QM-MD5x1, Slot 5 Digital Input Signal Descriptions; AudioOutPrgCompPreset#
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QM-MD5x1, Slot 5 Digital Input Signal Descriptions INPUT DESCRIPTION MuteAudioOutSp Mutes the SP channel of AUDIO OUT, for as long as the input is high. This soft mute smoothly attenuates the speech audio to avoid audible pops. High/1 (level-sensit...
Page 55 - QM-MD5x1, Slot 5 Analog Input Signal Descriptions; SaveCompPreset
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1, Slot 5 Analog Input Signal Descriptions INPUT DESCRIPTION CompToSave [This signal is operative only if Auto Compensation is NOT enabled.] Sets the source gain compensation that will be saved to the preset given by the analog signal CompPr...
Page 56 - RecallCompPreset; QM-MD5x1, Slot 5 Digital Output Signal Descriptions
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 QM-MD5x1, Slot 5 Analog Input Signal Descriptions (continued) INPUT DESCRIPTION AudioOutPrgCompPreset# [This signal is operative only if Auto Compensation is NOT enabled.] Sets the source gain compensation preset number that will be recalled when t...
Page 57 - QM-MD5x1, Slot 5 Analog Output Signal Descriptions; Example Program; in; Creating Labels with Crestron Engraver; Uploading and Upgrading
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer QM-MD5x1, Slot 5 Analog Output Signal Descriptions OUTPUT DESCRIPTION AudioOutSpVolume_F Indicates the volume level of the SP channel of AUDIO OUT. AudioOutSpDelay_F Indicates the speech delay being applied to the SP channel of AUDIO OUT. AudioOutL...
Page 58 - ) or as a standalone utility. The Viewport; Communication Settings; For laptops and other PCs without a built-in RS-232 port, Crestron; Typical Connection Diagram when Uploading
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 NOTE: The Crestron Viewport is available as a pull-down command from SIMPL Windows and VT Pro-e ( Tools | Viewport ) or as a standalone utility. The Viewport utility accomplishes multiple system tasks, primarily via an RS-232 or TCP/IP connection b...
Page 59 - select; Setup | Communications; to open the “Port Settings” window.; Setup | Communications Settings Command; as the connection type. Verify that an available COM; button to save the settings and close the window.; “Port Settings” Window
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer 1. Open the Crestron Viewport. Either launch the stand-alone version of Viewport or start SIMPL Windows and from the menu bar, select Tools | Viewport . 2. Refer to the following figure after this step. From the Viewport menu, select Setup | Commun...
Page 60 - Uploading a SIMPL Windows Program; Upload via SIMPL Windows; File Transfer | Send Program Command; What to
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 56 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300 4. To verify communication, select Diagnostics | Establish Communications (Find Rack) . This should display a window that gives the COM port and baud rate. If communicati...
Page 61 - “Send Program” Window; Diagnostics | Report Program Information; or press; Firmware Upgrade; page 54 has been performed.; File Transfer | Update Network; from the Viewport menu bar.; File Transfer | Update Network Device Firmware... Command
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 57 “Send Program” Window 4. To verify that the program has been transferred successfully, select Diagnostics | Report Program Information or press F7 . This should display a...
Page 62 - “Select Network ID” Window; Operation; Operating Modes
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 58 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300 “Select Network ID” Window “Open” Window 4. Browse to the desired .upg file and click Open to begin the transfer. Operation Operating Modes The MD5x1 operates in either t...
Page 63 - Viewing Signal Routes in the System Mode
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 59 Viewing Signal Routes in the System Mode When in the system mode ( SYS LED is illuminated), pressing an input signal button will display all of the outputs that are route...
Page 64 - Adjusting Speech and Program Audio Levels
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 60 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300 2. Enable the audio break function by pressing AUDIO BREAK . When audio break is enabled, the AUDIO BREAK and A LEDs will illuminate. 3. Select the audio portion of an in...
Page 65 - Adjusting the Speech Signal Volume
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 61 Adjusting the Speech Signal Volume To adjust the volume level of the Speech portion of an audio signal, perform the following steps. 1. To select the Speech or Program Au...
Page 66 - Problem Solving; Troubleshooting; QM-MD5x1 Troubleshooting; TROUBLE; Poor picture quality.; Further Inquiries; ) for a listing of Crestron worldwide offices.
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 62 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300 Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestr...
Page 67 - Future Updates
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 63 Future Updates As Crestron improves functions, adds new features, and extends the capabilities of the QM-MD5x1, additional information may be made available as manual upd...
Page 68 - Appendix: Serial Protocol; Multiple serial commands cannot be strung together.; Front Panel Functions; Front Panel Lock Commands; COMMAND FUNCTION; Unlock front panel; MESSAGE DEFINITION; Front panel is locked; Verbose Mode Functions
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 64 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300 Appendix: Serial Protocol All commands and responses are printable ASCII and are terminated with a <CR> (\x0D). The serial commands listed here are grouped into fro...
Page 69 - Verbose Mode Commands; Verbose Mode Status Replies; Switching/Routing Functions; Switching/Routing Commands; XX; If an input greater than “5” or “05” is sent, the command is ignored. If an
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 65 Verbose Mode Commands COMMAND FUNCTION R0\r Verbose mode off R1\r Verbose mode on R?\r Get verbose mode status When the state of the verbose mode changes to on, or if pol...
Page 70 - Switching/Routing Status Replies; the local mode, even if the verbose mode is on. Use the; “Switch All” Example; The string “C020401\r” sends the following command:
QuickMedia™ Matrix Switcher/Mixer Crestron QM-MD5x1 66 • QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 Operations Guide - DOC. 6300 When the verbose mode is on and the routing status changes while the MD5x1 is in the system mode, or if the MD5x1 is polled for the status of an output, the MD5x1 replies...
Page 71 - Return and Warranty Policies; Merchandise Returns / Repair Service
Crestron QM-MD5x1 QuickMedia™ Matrix Switcher/Mixer Operations Guide - DOC. 6300 QuickMedia™ Matrix Switcher/Mixer: QM-MD5x1 • 67 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRES...
Page 72 - Operations Guide – DOC. 6300; Specifications subject to
Crestron Electronics, Inc. Operations Guide – DOC. 6300 15 Volvo Drive Rockleigh, NJ 07647 01.05 Tel: 888.CRESTRON Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.
Crestron CP-X2514WN
Manual
Crestron 1.5
Manual
Crestron SRD-SPL-4
Manual
Crestron CNRFGWA-418
Manual
Crestron TPS-6X-DS
Manual
Crestron ST-BTP
Manual
Crestron IM-RXV1-M
Manual
Crestron TPS-6X-BTP
Manual
Crestron AM/FM/TV Tuner
Manual
Crestron UPX-OS4GB-MSO-2007
Manual
Crestron C2N-TFM
Manual
Crestron CLS-C6RF Series
Manual
Crestron CEN-UPS1250
Manual
Crestron 120 Volt
Manual
Crestron CLX-1DIM4
Manual
Crestron CEN-iServer
Manual
Crestron Power Switching
Manual
Crestron AAS-1/2/4
Manual
Crestron DIN-PWS50
Manual