Crestron DIN-HUB - Manuals

Crestron DIN-HUB – Manual in PDF format online.

Manuals:

Manual

Manual Crestron DIN-HUB

Summary

Page 2 - 5 Volvo Drive

This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2008 Crestron Electronics, Inc.

Page 3 - Contents

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Contents Crestron Green Light™ DIN Rail Cresnet ® Distribution Hub: DIN-HUB 1 Introduction ............................................................................................................................... 1 Features and Functions ......

Page 5 - Introduction; Features and Functions

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Crestron Green Light™ DIN Rail Cresnet ® Distribution Hub: DIN-HUB Introduction The DIN-HUB is a DIN rail-mounted Cresnet ® hub designed to facilitate the configuration of large Cresnet networks. DIN rail mounting enables modular installation alon...

Page 6 - Three-Segment Cresnet Hub

DIN Rail Cresnet ® Distribution Hub Crestron DIN-HUB Three-Segment Cresnet Hub Cresnet is the communications backbone for Crestron lighting modules, wall box dimmers, shade controllers, thermostats, keypads, touchpanels, and many other devices. This flexible 4-wire bus normally supports approximatel...

Page 7 - Applications; The following diagram shows a DIN-HUB in a typical application.

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Applications The following diagram shows a DIN-HUB in a typical application. DIN-HUB in a Typical Application Operations & Installation Guide – DOC. 6671A DIN Rail Cresnet Hub: DIN-HUB • 3

Page 8 - Specifications; Specifications for the DIN-HUB are listed in the following table.; SPECIFICATION DETAILS

DIN Rail Cresnet ® Distribution Hub Crestron DIN-HUB Specifications Specifications for the DIN-HUB are listed in the following table. DIN-HUB Specifications SPECIFICATION DETAILS Power Requirements Cresnet Power Usage 0.6 Watts (0.03 Amp @ 24 Volts DC) Maximum Load per Segment 75 Watts (3.13 Amps @ ...

Page 9 - Physical Description; DIN-HUB Physical View

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Physical Description This section provides information on the connections, controls and indicators available on your DIN-HUB. DIN-HUB Physical View DIN-HUB Overall Dimensions 106 mm (4.17 in) 94.2 mm (3.71 in) 90 mm (3.54 in) 58 mm (2.28 in) 1 2 3...

Page 10 - INDICATORS; NET

DIN Rail Cresnet ® Distribution Hub Crestron DIN-HUB Connectors, Controls & Indicators # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 1 NET PWR INPUT (A/B/C) (3) 3-pin 3.5 mm detachable terminal blocks Cresnet power selection connectors for each segment Connect to external Cresnet power ...

Page 11 - NET HOST and LEDs; port; ports of corresponding

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Connectors, Controls & Indicators (Continued) # CONNECTORS 1 , CONTROLS & INDICATORS DESCRIPTION 2 NET HOST and LEDs (Continued) (1) Yellow LED indicates Cresnet bus activity at either NET HOST port 3 NET A/B/C and LEDs 2 (6) 4-pin 3.5 mm ...

Page 12 - Industry Compliance; This device complies with part 15 of the FCC rules. Operation is

DIN Rail Cresnet ® Distribution Hub Crestron DIN-HUB Industry Compliance This unit has been manufactured to comply with UL’s Standards for Safety in Canada and the United States. Formal approval is pending. As of the date of manufacture, the DIN-HUB has been tested and found to comply with specifica...

Page 13 - Setup; Network Wiring

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Setup Network Wiring When wiring the Cresnet ® network, consider the following: • Use Crestron Certified Wire. NOTE: Cresnet-HP wire cannot be used. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CA...

Page 14 - Installing the DIN-HUB; Place the top of the DIN-HUB’s rail mount over the top of the DIN

DIN Rail Cresnet ® Distribution Hub Crestron DIN-HUB The DIN-HUB is designed for installation on a DIN rail. Refer to the following diagram when installing. Installing the DIN-HUB DIN-HUB TOP DIN RAIL(NOT SUPPLIED) DIN RAIL RELEASE 1. Place the top of the DIN-HUB’s rail mount over the top of the DIN...

Page 15 - Hardware Hookup; Hardware Connections for the DIN-HUB

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Hardware Hookup Make the necessary connections as called out in the illustration that follows this paragraph. Refer to “Network Wiring” on page 9 before attaching the 4-position terminal block connector. Apply power after all connections have been...

Page 16 - Powering a Hub Segment Internally (Segment A Shown)

DIN Rail Cresnet ® Distribution Hub Crestron DIN-HUB Power can be supplied from a DIN-PWS50 DIN Rail Power Supply or other Cresnet power supply connected to the NET HOST port. For more information, refer to the latest version of the DIN-PWS50 Operations & Installation Guide (Doc. 6667), which is...

Page 17 - Problem Solving; Troubleshooting; DIN-HUB Troubleshooting; TROUBLE; LED does; port on the

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. DIN-HUB Troubleshooting TROUBLE POSSIBLE ...

Page 18 - Incorrect wiring at; NET PWR INPUT; Verify that the; port is; PWR; Check Network Wiring; Use only Crestron power supplies for Crestron equipment.

DIN Rail Cresnet ® Distribution Hub Crestron DIN-HUB DIN-HUB Troubleshooting (Continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Incorrect wiring at NET PWR INPUT port. Verify that the NET PWR INPUT port is wired correctly for internal or external power. Segment’s PWR LED does not illuminate. In...

Page 19 - Cable Length Equation; Reference Documents

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Cresnet units are to be daisy-chained on the run, the Cresnet power usage of each network unit to be daisy-chained must be added together to determine the Cresnet power usage of the entire chain. If the unit is home-run from a Crestron system powe...

Page 20 - List of Related Reference Documents; DOCUMENT TITLE; DIN-PWS50 DIN Rail 50 Watt Cresnet Power Supply; Further Inquiries; ) to ask questions about Crestron products.; Future Updates

DIN Rail Cresnet ® Distribution Hub Crestron DIN-HUB List of Related Reference Documents DOCUMENT TITLE DIN-PWS50 DIN Rail 50 Watt Cresnet Power Supply Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award ...

Page 21 - Return and Warranty Policies; Merchandise Returns / Repair Service

Crestron DIN-HUB DIN Rail Cresnet ® Distribution Hub Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized ...