Crestron CLW-SLVS1RF - Manuals

Page 2 - 5 Volvo Drive

This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. Windows ® and Windows ® XP are registered trade...

Page 3 - Contents

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Contents infiNET™ Switches: CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF 1 Introduction ............................................................................................................................... 1 Features and Functions ..............

Page 5 - Introduction; Features and Functions; control processor via a Crestron; Two-way infiNET switches

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches infiNET™ Switches: CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Introduction Features and Functions The CLW-SW1RF (-SW1RF) one-button switch and CLW-SW4RF (-SW4RF) four-button switch are stand-alone wall box switches that can also act as wireless infiN...

Page 6 - RUN; Specifications; SPECIFICATION DETAILS

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET Gateway and, if more devices are needed, more C2N-MNETGW gateways may be added to a Cresnet ® network. Crestron infiNET switches operate on the 2.4 GHz “ISM band” (2400 MHz to 2483.6 MHz) at 10 mW. The output power of these devices ...

Page 8 - Physical Description

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF 5. VA ratings are for input power to the transformer. If you do not know the input power requirement of the transformer, use the bulb’s wattage rating to determine proper rating. NOTE: Crestron software and any files on the website are for ...

Page 11 - Industry Compliance; This device may not cause harmful interference, and

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Physical View of CLW-SLVS1RF (Clockwise from Top; Top, Side, and Front) 1.75 in (4.45 cm) 3.81 in (9.68 cm) 4.13 in (10.48 cm) 3.28 in (8.32 cm) 1.88 in (4.77 cm) 2.70 in (6.86 cm) 1.50 in (3.81 cm) The -SW1RF, -SW4RF, -SWS1RF, -SWS4RF, and...

Page 12 - Industry Canada Statement; Acquiring the Switch on the infiNET Network; Acquiring the Switch; NOTE; Acquire

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Industry Canada Statement The term "IC" before the certification/registration number only signifies that the Industry Canada technical specifications were met. IC: 5683A-CWD1011 Acquiring the Switch on the infiNET Network Before an ...

Page 13 - Removing Gateway Information from a Switch; To clear a switch’s gateway information:; Operation; Mode Selection Switch; OFF; must; be

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches mode. The device is acquired when the LED stops blinking and lights at the LOW setting. After being acquired, the device will exit the Acquire mode. The switch will be acquired on the C2N-MNETGW with an MNET ID value of 01. 3. Take the C2N-...

Page 14 - BUTTON PRESS; SET; FUNCTION

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF RUN When the switch is in the “RUN” position, it is operating in the RUN mode. This is the normal operating mode of the switch. The RUN mode is used to turn the load on and off. If a delay time is set, the switch will turn off the load afte...

Page 15 - Restoring Default Settings; LED BEHAVIOR

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches After setting the preset value(s), return the mode selection switch to the “RUN” position. -SLVS1RF The -SLVS1RF has one rocker button. The -SLVS1RF does not have a mode selection switch. It will emulate the RUN mode of the -SWS1RF (even if...

Page 16 - Identity Code; Using Touch Settable ID (TSID) to Set MNET ID; filename

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Identity Code Just like every device on a Cresnet system requires a unique identity code (NET ID), every device and user interface on the infiNET network requires a unique identity code (MNET ID). These codes are two-digit hexadecimal numbe...

Page 17 - as shown in the Network Device Tree window below.; With the Network Device Tree open, select; Tree; Click the text “Click here to open program...” to select the SIMPL

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches The infiNET switch and dimmers have already been acquired as described in the acquiring procedure described on page 8. The devices have been assigned the default MNET ID 01 as shown in the Network Device Tree window below. Network Device Tr...

Page 18 - icon. Devices with NET IDs; Horizontally; to tile the open windows in

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF After selecting a file, SIMPL Windows will initialize and the SMW Program Tree will be displayed. SMW Program Tree Devices with NET IDs or MNET IDs that have been identified by the SMW Program Tree are marked with a icon. Devices with NET I...

Page 19 - OK; Lighting

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches 4. In the SMW Program Tree, right-click on the top level of the tree and select Link with Network Control . Link with Network Control A window will be displayed with instructions for linking the SMW Program Tree to the Network Device Tree. ...

Page 20 - Individual devices can be set up by right-clicking the device; Setup this device; to set up the devices in the order they appear on the list.

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF The “Setup Lighting” window will open and display a list of unidentified lighting devices. Setup Lighting Window The listed devices can be sorted in ascending or descending order by clicking on the column headers. The order can also be adju...

Page 21 - Yes

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches CLW-DIM1RF Devices in Setup Mode Window; Identifying a Device The LEDs on all of the CLW-DIM1RF dimmers on the list will flash. 9. Physically locate the dimmer in the bedroom with the flashing LED and touch the top or bottom of the large bu...

Page 22 - Close; to close the window once all devices have been identified.

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Setup Lighting Window, Setup of First Device in List Completed 10. Continue identifying all of the remaining unidentified devices on the list. When all devices have been identified, a summary will be displayed in the upper portion of the wi...

Page 23 - Manually Setting the MNET ID in Crestron Toolbox; You may also use D3 Pro or SystemBuilder to perform MNET ID setup.

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Network Device Tree with Devices Set Up with SMW Program Tree Manually Setting the MNET ID in Crestron Toolbox The following method permits you to change the MNET ID of any infiNET device on the infiNET network through the “Network Device T...

Page 24 - Change Network ID; Any infiNET switch in the Network Device Tree can be identified; Identify this...; ”. The LED on the switch will flash HIGH. Press

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF “Network Device Tree” with Newly Added infiNET Device 3. Expand the device tree until the MNET ID that is to be changed is visible. Right-click on the MNET ID, and when the sub-menu appears, select Change Network ID . “Network Device Tree” ...

Page 25 - Select a new MNET ID and press; Enter; Devices with an MNET ID of 01 or 02 cannot be used in a control; Programming Software; Setup is easy thanks to Crestron’s Windows

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches 4. Select a new MNET ID and press Enter . Enter New MNET ID Repeat this procedure for each additional infiNET device requiring a MNET ID change. WARNING: Devices with an MNET ID of 01 or 02 cannot be used in a control system program. These ...

Page 26 - Earliest Version Software Requirements for the PC; D3 Pro Templates 1.0 or later; Programming with D3 Pro & SystemBuilder

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF into the panels. Alternatively, VT Pro-e can be used to tweak projects created with the D3 Pro and/or SystemBuilder or develop original touchpanel screen designs. NOTE: Crestron recommends the use of D3 Pro or SystemBuilder for programming ...

Page 27 - Programming with SIMPL Windows

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Programming with SIMPL Windows NOTE: The following assumes that the reader has knowledge of SIMPL Windows. If not, refer to the extensive help information provided with the software. NOTE: The following are acceptable file extensions for pr...

Page 28 - C2Net-Device Slot in Configuration Manager; Device Library; System Views; Setting the Net ID in Device Settings; Net ID

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF C2Net-Device Slot in Configuration Manager Before adding an infiNET switch to a system, a C2N-MNETGW must first be added. To incorporate a C2N-MNETGW into the system, drag the symbol from the Wireless Receivers |Wireless Receivers (RF) fold...

Page 29 - Adding infiNET Devices to the C2N-MNETGW; and select an infiNET device as shown in; The default MNET ID used by SIMPL Windows is different from the

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches exists in the program. Always ensure that the hardware and software settings of the Net ID match. For Net ID hardware settings details, refer to “Identity Code” on page 12. Adding infiNET Devices to the C2N-MNETGW To add infiNET devices to ...

Page 30 - Setting the MNET ID in Device Settings; tab to change the MNET ID, as shown in the following figure.; SIMPL Windows automatically changes MNET ID values of a device; infiNET Switch Symbols in Programming Manager

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF C2Net Device, Slot 9, with infiNET Device Setting the MNET ID in Device Settings Double-click the CLW-SW1RF icon to open the “Device Settings” window. This window displays the CLW-SW1RF device information. If necessary, select the RF/IR ID ...

Page 31 - Attaching and Detaching the Electrical Load

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Attaching and Detaching the Electrical Load The buttons on the switch can be attached (default) or detached from the electrical load. When attached to the electrical load, the electrical load is controlled by the button’s built-in functiona...

Page 32 - Uploading and Upgrading; Establishing Communications

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Uploading and Upgrading NOTE: Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. Please check the Crestron website (http://ww...

Page 34 - Toolbox displays a customized list of functions depending on the

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF no devices are reported, verify the connections between the control system and the devices that are connected to it. If infiNET devices are not listed, verify that they have been acquired as described in the acquire procedure on page 8. Net...

Page 35 - Troubleshooting Communications; Upload via SIMPL Windows; Open; Upload via Crestron Toolbox

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Troubleshooting Communications Use the following checklist if communication cannot be established with the control system. 1. Verify that the correct cables are used. Refer to the control systems Operations Guide for information about RS-23...

Page 36 - Select the entry for the control system or; Serial on COM1; from the drop; option becomes available from the menu bar.; Functions

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Crestron Toolbox - Tools | System Info 3. Select the entry for the control system or Serial on COM1 from the drop down list at the bottom of the window if it is not already selected. When the “System Info” window appears and you are connect...

Page 37 - the; Select a file and click; Send

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches 5. Click the button to browse for a new compiled (.spz) program. “Open” Window 6. Select a file and click Open. When the “SIMPL Program” window re-opens click Send . Operations Guide - DOC. 6397 infiNET Switches: Crestron CLW-SW1/4RF, -SWS1...

Page 38 - Firmware Upgrade; page 28 has been performed.; Click; Upload New Firmware; Browse...; to find a firmware file to send to the device.

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Firmware Upgrade To take advantage of all the device features, it is important that the unit contains the latest firmware available. Please check the Crestron website for the latest version of firmware. Not every product has a firmware upgr...

Page 40 - Problem Solving; Troubleshooting; TROUBLE

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF Problem Solving Troubleshooting The table after this paragraph provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. infiNET Switch Troubles...

Page 41 - Bootloader

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches infiNET Switch Troubleshooting (continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION If the LED flashes OFF for ¼ second two times, then returns to low, the MNET ID of device is not set to match the MNET ID of the SIMPL Windows program. U...

Page 42 - the start of; Further Inquiries; ) for a listing of Crestron worldwide offices.; Future Updates

infiNET™ Switches Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF the start of Acquire mode ( Acquire mode does not actually start until you release the button). Continue holding the button for another five seconds, and the LED will flash twice to indicate that the gateway connection will be released on t...

Page 43 - Return and Warranty Policies; Merchandise Returns / Repair Service

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF infiNET™ Switches Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the fa...

Page 44 - Operations Guide – DOC. 6397

Crestron Electronics, Inc. Operations Guide – DOC. 6397 15 Volvo Drive Rockleigh, NJ 07647 (2014134) Tel: 888.CRESTRON 12.05 Fax: 201.767.7576 Specifications subject to www.crestron.com change without notice.