Cortelco WPBX00 PRO MAN - Manuals

WPBX00 PRO MAN CLASS OF SERVICE 4.11 The day and night class of service can be changed to 1 of 26 settings. Under Extension Data, a Class of Service can be selected for each extension. The settings must be pre-pro- grammed under Setup-Class of Service-Classes of Service. The day and night mode time ...

WPBX00 PRO MAN Page 9 SHOW STATUS 4.14 When “Show Status” is selected, the current status of the handsets, SLT’s and PSTN lines is displayed in three seperate windows. The user can leave all three windows open or can close any window they choose.

WPBX00 PRO MAN CALL LOG - VIEW 4.15 To view call log records, press Show Log on the main menu bar. Outgoing, Internal and Incoming Logs are displayed. To clear a call log, select the desired call log and press “Clear”. The Call Log can be programmed under Setup - Log Setup. The Call Log must be enab...

WPBX00 PRO MAN Page 12 CALL LOG SETUP 4.18 The Call Log can be programmed under Setup - Log Setup. The Call Log must be enabled for calls to be recorded. 4.19Log Setup - A total of 200 call log entries can be recorded. The default log settings are 66 local, 66 long distance, and 68 incoming calls. T...

WPBX00 PRO MAN Page 13 NUMBER PLAN 4.22 To enter the Number Plan, press Setup and select “Number Plan”. The Number Plan is then read from the MBS and “The number plan was read successfully.” will display on the screen. Press OK. If the number plan is not read successfully, close the menu and try aga...

WPBX00 PRO MAN PRINTER AND PAGE SETUP 4.25 The printer and page setup menu can be used to change the printer initialization com- mand and page length details. Page 14 FAX AND MODEM 4.26 The fax and modem menu is used to define the SLT line associated with each device. A fax or modem may be wire conn...

WPBX00 PRO MAN SETTINGS - PSTN LINE SETTINGS 4.33 Assign individual extensions or groups to PSTN lines 1-4. An additional PSTN card is needed for lines 5-8. If an additional card is installed, but does not show as active, refer to the distributor setup to activate the lines. Note: If lines 1-4 are l...

WPBX00 PRO MAN Page 17 SETTINGS - ROUTE TO AUTO ATTENDANT 4.35 Route to auto attendant can be activated by entering “YES” for the desired lines. DIALING MODE 4.36 The dialing mode can be DTMF or Pulse Dialing. PAUSE TIME 4.37 The pause time is used to delay the dialing sequence. This is useful when ...

WPBX00 PRO MAN Page 18 EMERGENCY NUMBERS 4.40 Four emergency numbers can be defined in this window. These numbers will be loaded in the handset after update is clicked. The numbers can be accessed regardless of toll restriction. MBS - REGISTER BUTTON 4.41 If the Register button is enabled, then the ...

WPBX00 PRO MAN Page 19 MBS - PSTN CONFERENCING 4.42 This feature is used to enable PSTN to PSTN conferencing with one internal handset. MBS - EXTERNAL MUSIC ON HOLD 4.43 This feature is used to enable music on hold from an external source through an RCA connector in the MBS.

WPBX00 PRO MAN MBS - CALL FORWARD NO REPLY TIME 4.44 The default setting for call forward no reply time is 10 s. The setting can be altered from 1 to 99 seconds. MBS - CALL PICKUP 4.45 If call pickup is set to “No Restrictions”, then any user can pick up any incoming call. If call pickup is set to “...

WPBX00 PRO MAN AUTO ATTENDANT 4.49The auto attendant menu is used to set the operation of the auto attendant. The WPBX has a built-in auto attendant, which can prompt the incoming caller for operations such as “Dial the desired extension”. The voice prompt for the auto attendant can be recorded thou...

WPBX00 PRO MAN CLASS OF SERVICE DAY/NIGHT MODE 4.53 This window allows day and night times to be set. There is an option for auto change between day and night mode. The day mode and night mode class of service for each hand- set is setup under extension. Day mode is normal operation for the system. ...

WPBX00 PRO MAN DIAGNOSTICS 4.55 The diagnostics menu is used to perform basic diagnostic testing of the MBS. It will take approximately 2 minutes to perform the test. After the test is complete, click on the “Test Results” button. The following results should be displayed. Page 25 CLEAR SETTINGS 4.5...

WPBX00 PRO MAN Page 26 RECORD MESSAGE 4.58 The voice message for No Operator, Night Mode, and No Answer can be recorded here. Choose the desired message to record and press Start. Press Stop when finished. Note: Message is recorded from external music on hold source. EEPROM DOWNLOADER 4.59The eeprom...

WPBX00 PRO MAN NO ANSWER GREETING 5.4 If No Answer Timeout is enabled, then the No Answer greeting will be played. After the timeout (value) time, then the system will repeat the previous day or night mode voice prompt. NO DIGIT TIMEOUT 5.5 If no digit timeout is enabled, then if the caller does not...