Cortelco WPBX00 PRO MAN - Manual
Cortelco WPBX00 PRO MAN – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – WPBX00 PRO MAN; PROGRAMMING
- Page 5 – EXTENSION SETUP
- Page 7 – CALL FORWARDING
- Page 8 – CLASS OF SERVICE
- Page 9 – SHOW STATUS
- Page 10 – calls to be recorded.
- Page 12 – CALL LOG SETUP
- Page 13 – NUMBER PLAN
- Page 14 – PRINTER AND PAGE SETUP
- Page 16 – SETTINGS - PSTN LINE SETTINGS
- Page 17 – SETTINGS - ROUTE TO AUTO ATTENDANT
- Page 18 – EMERGENCY NUMBERS
- Page 19 – MBS - PSTN CONFERENCING
- Page 20 – MBS - CALL FORWARD NO REPLY TIME
- Page 22 – AUTO ATTENDANT
- Page 24 – CLASS OF SERVICE DAY/NIGHT MODE
- Page 25 – DIAGNOSTICS
- Page 26 – RECORD MESSAGE
- Page 28 – NO ANSWER GREETING
WPBX00 PRO MAN
Cortelco
COMPASS Wireless PBX System
PROGRAMMING INSTRUCTIONS
CONTENTS PAGE
1. INTRODUCTION ................................. 1
2. PROGRAMMING INFORMATION ....... 1
COMPUTER REQIUREMENTS ....... 1
PRINTER REQUIREMENTS ............. 1
TECHNICAIN PASSWORDS ........... 1
GENERAL RULE ............................. 2
3. SOFTWARE INSTALLATION .............. 2
4. PROGRAMMING ................................ 3
PBX CONFIG ................................... 4
EXT. SETUP .................................... 5
CLASS OF SERVICE ...................... 8
HANDSET DEREGISTRATION ........ 8
SYSTEM STATUS ............................ 9
CALL LOG ..................................... 10
CALL LOG SETUP ........................ 12
NUMBER PLAN ............................. 13
PRINTER AND PAGE SETUP ........ 14
FAX AND MODEM ......................... 14
DISTRIBUTOR MODE .................... 15
SETTINGS ..................................... 16
EMERGENCY NUMBERS ............. 18
MBS SETTINGS ............................ 19
CLASS OF SERV. SETTINGS ....... 23
RBS CABLE LENGTH ................... 24
DIAGNOSTICS ............................... 25
CLEAR SETTINGS ........................ 25
5. AUTO ATTENDANT ............................ 27
Page 1
1.
INTRODUCTION
1.01 This section describes programming
for the Compass Wireless PBX System
equipped with Programming Software. In-
structions are included for completing the nec-
essary programming.
1.02 Whenever this section is reissued, the
reason for reissue will be listed in this para-
graph.
RELATED DOCUMENTS
1.03 For additional information regarding
the Compass Wireless PBX System, refer to
the General Description and Installation manu-
als.
2.
PROGRAMMING INFORMATION
2.01 The following paragraphs provide
guidelines to assist the technician during sys-
tem database planning and programming.
COMPUTER REQUIREMENTS
2.02 Pentium 133 or above with RS232
Com port, Windows 98, 2000, XP or ME.
PRINTER REQUIREMENTS
2.03 Epson dot matrix printer or compatible.
TECHNICIAN PASSWORD
2.04 Access to programs in the customer
database is protected by several passwords.
The passwords are listed on the following
page.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
WPBX00 PRO MAN Page 3 4. PROGRAMMING PC SETUP 4.01 After executing the computer programming file, the program will check for the proper COM port connection. If the correct COM port is not selected, then select the correct port to start the connection (Ports 1-4 available). If the COM port is correct...
WPBX00 PRO MAN Page 5 EXTENSION SETUP 4.06 Extension Setup displays all registered handsets, SLT, Console, Lines and Group Infor- mation. Each item can be accessed by double clicking on the name of the device. The system will then communicate with the device and display info. If a read error occurs,...
WPBX00 PRO MAN CALL FORWARDING 4.10 Call forwarding can be enabled/disabled under Extension Setup. The call forward status will not become active until OK is selected. Call forwarding can also be enabled/disabled via the handset menu. Note: If call forwarding is set up via the computer, allow ~1 m...
