Compaq 5017 - Manuals

Reference Guide 3–1 3 Installation Monitor Setup Before installing your monitor, place it in a convenient, well-ventilated location near your computer. 1. Turn off the power to your computer and other peripheral devices. 2. Connect the monitor signal cable to the video connector 1 on the rear panel ...

Reference Guide 4–1 4 Operation Information Files The CD-ROM included with this monitor contains two information files to be installed onto your computer; an .INF file and an .ICM file. The .INF file defines monitor resources and provides specifications used by most operating systems to install supp...

4–2 Reference Guide Operation Front Panel Controls No. Icon Control Function 1 Headphone Jack Connects a headphone set to the monitor. 2 Select Launches on-screen displays, selects functions and adjustments, and exits menus and On-Screen Display. 3 - Left Adjustment Moves backward through menu optio...

Operation Reference Guide 4–3 *Sleep Timer enables you to set a time for the monitor to power on and power off at the same time every day. It eliminates the need to turn off the monitor at the end of the day and conserves energy. To set this mode, refer to the Sleep Timer in the on-screen display. N...

4–4 Reference Guide Operation 3. To move to a function, press the Right-Adjustment or Left-Adjustment button on the front panel of your monitor until the function is highlighted. 4. Press the Select button on the monitor choose the function. 5. The adjustment window displays. Press the Right-Adjustm...

Operation Reference Guide 4–7 How to Adjust Settings 1. To launch the on-screen display menu, complete the following: ❏ Basic Main Menu : To display the Basic Main Menu, press the Select button on the monitor front panel. ❏ Advanced Main Menu : Select “Advanced Menu” from the Basic Main Menu to disp...

4–8 Reference Guide Operation Note: After the Advanced Main Menu has been selected, it remains the default on-screen display each time the monitor is powered on until the Basic Main Menu option is selected again. 2. To select an item from the Basic Main Menu, scroll down and highlight an item by pre...

Operation Reference Guide 4–9 ■ Input Signal Out of Range: Indicates the monitor is unable to access or fully support the provided input signal. ■ Going to Sleep: Indicates the screen display is entering a sleep mode. ■ Check Video Cable: Indicates the video cable may not be plugged into the compute...

4–10 Reference Guide Operation By selecting settings in the monitor’s Energy Saver utility, you can also program the monitor to enter into the reduced power state at a predetermined time. When the monitor’s Energy Saver utility causes the monitor to enter the reduced power state, the Power LED blink...

Operation Reference Guide 4–11 6. Press the Left Adjustment or Right Adjustment buttons to adjust the hour. 7. Press the Select button again to enter the time for minutes. 8. Press the Left Adjustment or Right Adjustment buttons to adjust the minutes. 9. Press the Select button to lock in the time c...

4–12 Reference Guide Operation For more precise adjustments, use the Compaq LCD Display Assistant utility included on the CD-ROM. This utility graphically illustrates how to adjust the Clock and Clock Phase controls explained in the Optimizing Digital Conversion section below. Optimizing Digital Con...

Reference Guide A–1 A Troubleshooting Solving Common Problems The following table lists possible problems, the possible cause of each problem, and the recommended solutions. Problem Possible Cause Solution Screen is blank. Power cord is disconnected. Connect the power cord. Power switch is off. Turn...

Troubleshooting Reference Guide A–3 Using the World Wide Web Support services are available on the Internet through the Compaq Support Forum. You can either browse the postings as a guest, or register as a user and submit your own questions. Compaq responds to questions within one business day. To a...

A–4 Reference Guide Troubleshooting Preparing to Call Technical Support If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical support. Have the following information available when you call: ■ The monitor ■ Monitor model number ■ Serial number f...

Reference Guide B–1 B Specifications Compaq 5017 Flat Panel Monitor Technical Specifications Display Type 15 inches Flat panel, Active matrix-TFT LCD 38.1 cm Viewable Image Size 15 inch diagonal 38.1 cm Face Treatment 3H hardness coating with antiglare treatment Maximum Weight (Unpacked) 8.8 lb 4.0 ...

B–2 Reference Guide Specifications Display Resolutions The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen. Environmental Require...

Specifications Reference Guide B–3 5 800 x 600 37.88 + 60.32 + 40.000 VESA 6 800 x 600 48.08 + 72.19 + 50.000 VESA 7 800 x 600 46.88 + 75.00 + 49.500 VESA 8 832 x 624 49.73 +/- 74.55 +/- 57.284 MAC 9 1024 x 768 48.36 - 60.00 - 65.000 VESA 10 1024 x 768 56.48 - 70.07 - 75.000 VESA 11 1024 x 768 60.02...

Reference Guide C–1 C Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful i...

C–2 Reference Guide Agency Regulatory Notices Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Compaq Computer Corporation may void the user's authority to operate the equipment. Cables Connections to this...

Agency Regulatory Notices Reference Guide C–3 Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du...

C–4 Reference Guide Agency Regulatory Notices EPA Energy Star Compliance Monitors that are marked with the Energy Star Logo meet the requirements of the EPA Energy Star program. As an Energy Star Partner, Compaq Computer Corporation has determined that this product meets the Energy Star guidelines f...

Reference Guide D–1 D TCO ‘99 You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentall...

D–2 Reference Guide TCO ‘99 There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environ...

TCO ‘99 Reference Guide D–3 Below you will find a brief summary of the environmental requirements met by this product. The complete environmental criteria document may be ordered from: TCO Development SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): [email protected] Current infor...

D–4 Reference Guide TCO ‘99 ✎ Bioaccumulative is defined as substances which accumulate within living organisms. Cadmium Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The r...

TCO ‘99 Reference Guide D–5 CFCs (Freons) The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs break down ozone and thereby damage the ozone layer i...