Code Alarm SRT 1600 - Manuals

5 Additional LCD Remote Control Functions LCD Remote Control Display Illumination Press and release the “F” button on the LCD remote control one time. The display will illuminate for 10 seconds. LCD Remote Control Vibrate or Tones Press and release the “F” button and the UNLOCK button on the LCD rem...

8 LCD Screen Icons and their Indications CALL NO START LOCKED/ARMED UNLOCKED/DISARMED P. LIGHT FLASH VALET MODE TRANSMITTING HOOD DOOR TRIGGER TRUNK SHOCK TRIGGER IGNITION TRIGGER ENGINE RUNNING COUNT DOWN TIMER MODE BATTERY INDICATOR BATTERY SAVE MODE PAGE FROM VEHICLE VIBRATE/SILENT MODE REMOTE ST...

9 Emergency Override Procedure If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the security system off. There are two types of emergency override procedures. Check with your installing dealer to find outwhat has been activated on your system. S...

11 Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorized CODE dealer, that (except as provided below) should thisProduct under normal use and conditions, be proven...

12 FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of IndustryCanada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference thatm...