Code Alarm CA611 - Manuals - manualsarea.com

Page 3 - If the passive arming feature has been selected:; PROTECTION WHILE THE SYSTEM IS ARMED:

ARMING THE SYSTEM: If the passive arming feature has been selected: Turn the engine OFF, exit the vehicle, and close all doors, hood and trunk. The LED will begin to flash rapidly indicating that the 30 second passivearming timer has begun. If the dash mounted LED does not begin to flashrapidly, the...

Page 4 - DISARMING THE SYSTEM:

Page 4 DISARMING THE SYSTEM: As you approach the vehicle, press and release the Disarm button on thetransmitter. The parking lights will flash 2 times, the siren/horn will chirp 2times, and the LED will turn off. If you have the optional door lock/unlock circuit installed, the doors will unlock.If y...

Page 6 - Enter the vehicle, and turn the ignition key to the ON position.; MANUALLY OVERRIDING YOUR SYSTEM:; Open the vehicle door. The alarm will sound.; Programming Your Custom Override Code:

Page 6 VALET MODE: The valet button allows you to temporarily bypass all alarm functions,eliminating the need to hand your transmitter to parking attendants or garagemechanics. When the system is in valet mode, all alarm functions arebypassed, however the remote panic feature, remote door locks and ...

Page 7 - Finish by turning the ignition switch to the OFF position.; CUSTOM CODE PROGRAMMING EXAMPLE:; Turn the ignition switch to the ON position.

Page 7 1. Disarm the system by use of the transmitter, or by use of the emergencyoverride sequence. Turn the ignition switch to the ON position. 2. Within 10 seconds, press and release the valet/override button 3 times. 3. Within 10 seconds turn the ignition switch OFF, ON, OFF, ON, OFF, ON. (The si...

Page 8 - Enter the vehicle and turn the ignition switch to the ON position.

5. Within 10 seconds, begin to press and release the push button switch toset the tenths digit. (As per example press and release 5 times to set thetenths digit to 5) 6. Within 10 seconds of the last press of the button, turn the ignitionOFF then ON. 7. Within 10 seconds, Begin to press and release ...

Page 9 - new code tenths for step 2 above, and units for step 5 above.; ELIMINATING THE NORMAL ARM/DISARM CHIRPS; Start with the valet switch in the OFF position.; REMOTE PANIC OPERATION:

new code tenths for step 2 above, and units for step 5 above. ELIMINATING THE NORMAL ARM/DISARM CHIRPS You can selectively eliminate the normal arm and disarm chirps by holding thetransmitter button slightly longer when arming or disarming. This will preventthe siren/horn chirps for one arm or disar...

Page 10 - REMOTE STARTING THE VEHICLE:; The gear shift selector is in any gear other than park.; SHUTTING DOWN THE REMOTE START:

REMOTE STARTING THE VEHICLE: Press and release the option button of your transmitter 2 times within 2 secondsto activate the remote start system. The vehicle will start and remain runningfor the pre-programmed 10 or 15 minutes. As a visual indication, the parkinglights will flash or turn on dependin...

Page 12 - CA 611 SYSTEM FUNCTIONS AT A GLANCE

ALARM DASH MOUNTED LED INDICATORSRAPID FLASHING = PASSIVE ARMING SLOW FLASHING = ARMED OFF = DISARMED ON SOLID = VALET MODE 2 FLASH...SOLID = REMOTE START VALET MODE 3 FLASH...PAUSE = INTRUSION ZONE 3 2 FLASH...PAUSE = INTRUSION ZONE 2 1 FLASH...PAUSE = INTRUSION ZONE 1 ALARM SIREN/HORN CHIRP INDICA...