Clover LCD221616 - Manuals

Contents 7 8-4.5. Replay .......................................................................................................................................... 143 8-4.6. COPY ...........................................................................................................................

9 About this manual This is the Instruction Manual for 22” Wide TFT-LCD monitor built-in 16Ch DVR system, Model LCD22164, LCD22168 and LCD221616. The last digit(s) of the model numbers (e.g.: 4, 8 and 16) represent the number of cameras included in the system. This Manual describes how to install an...

11 1. Unpacking Care should be taken when unpacking to avoid damaging the system. Please check that the following items are included: Note : Contact your dealer immediately if any components are missing. 1 22” LCD Monitor built-in 16 Ch DVR 2-Indoor camera with C-mount lens 2-Outdoor camera with mou...

Stand-alone DVR Instruction Manual 12 1-1. 22” Wide LCD Panel Built-in 16 Ch Digital Video Recorder LCD22164 is the most reliable and functional embedded DVR system available today. The system displays 16 channels of live images in Real Time speed, compresses data digitally and records them to the H...

13 2. Features ▶ 22” Wide Screen - High resolution TFT-LCD 1,680 x 1,050, Contrast ratio 1,000:1, Response time 5 msec ▶ Multi Functional Record - Powerful, multiple Record Modes available: Manual (Continuous), Timer, and Motion Detection Recording. ▶ User friendly GUI - A few simple buttons for Eas...

15 3. What to do at the time of Installation The system should be installed in the following order; 1. Make sure all the required hardware is available. - 22” wide TFT-LCD monitor built-in 16 Ch DVR - Up to 16 cameras capacity (Refer to the retail box for the number of camera included in the system)...

17 4. Specifications ITEM DESCRIPTIONS Television System NTSC PAL Refresh Rate 60 fields/sec 50 fields/sec Video Resolution 720x480 720x576 Video Inputs 8- 6pin Din Cameras and 8- BNC Cameras Video Input Signal Composite 1.0 Vp-p 75 Ohms Video Output 1- Composite output VIDEO SIGNAL Video Output Sig...

19 5. Installation CONTENTS 5-1. CONTROLS AND CONNECTORS ..................................................................................... 20 5-2. NOTE FOR INSTALLATION ............................................................................................... 23 5-3. SYSTEM CONNECTION ........

Stand-alone DVR Instruction Manual 22 C A M E R A I N E A C H 1 2 V D C . M A X 0 . 2 5 A . 3 W C H 1 C H 2 C H 3 C H 4 C H 5 C H 6 C H 7 C H 8 S L A V E V / O A / O E T H E R N E T 1 2 3 4 5 6 7 8 G A L A R M I N U S B 1 U S B 2 R S 2 3 2 R S 4 8 5 A L A R M O U T GND TX RX - + GND N/O COM N/C C H ...

5. Installation 25 5-4. Installation 5-4.1. Camera Connection ▫ Connection of 6pin MINI DIN Cameras Connect the supplied cameras to the Camera Input (6pin mini DIN jack) on the back of the system as shown in [Fig. 5-2 Rear View]. ▫ Connection of BNC Cameras Connect the BNC cameras (not included) to ...

Stand-alone DVR Instruction Manual 26 (screen) as shown [Fig.5-4-2]. - Attach the mounting bracket to the desired location on the wall. Locate wall studs and securely fix the mounting bracket with the supplied screws. 5-4.2.1. Connection of Composite Monitor If necessary, connect the composite Video...

5. Installation 27 5-4.4. RS485 / RS232C Connection ▫ Connect the cable to the “RS485 / RS232C PORT” on the rear of the system. Specification of the RS232C connector is standard for “DSUB9” The Maximum Length of cable is 45 ft. When you want to use a longer distance, use a “RS232 to RS422” converter...

29 6. How to operate CONTENTS 6-1. GENERAL INFORMATION ................................................................................................ 31 6-2. OPERATING INTERFACE ................................................................................................. 32 6-3. IR REMOTE CONT...

6. How to Operate 31 6-1. General Information ▫ You can operate all functions of the system by use of buttons located on the front panel, remote controller and a mouse. Additionally, you can remotely control this unit via RS422C or the Ethernet port located on the back of the unit. ▫ System status i...

6. How to Operate 35 ▫ Press the ENTER button to turn the power OFF. By clicking the mouse: ▫ Click the POWER OFF button on the MENU bar (See Fig.6-3 ) and then the message (See Fig.6-2 ) will be displayed on the screen. ▫ Click the OK button to turn the power OFF. 6-4.4 APPEARANCE OR DISAPPEARANCE ...

Stand-alone DVR Instruction Manual 40 6-7.3. SEQUENCING SCREENS ▫ Displaying the cameras in SEQUENCE is available in the LIVE mode or the RECORD mode. Each of the channels will be displayed in sequence and the dwell time can be adjusted in the camera set up menu (Refer to section 7-4.7). ▫ This ICON...

6. How to Operate 41 6-7.4. LIVE AUDIO ▫ The basic system (Model LCD22164) includes two indoor cameras built-in two way audio and two outdoor cameras built-in one way audio and IR LEDs (Infrared) to view objects in the darkness. Audio functions up to 8 cameras. ▫ Click the CHANNEL button you wish to...

Stand-alone DVR Instruction Manual 42 ▫ To listen only (one way Audio), select one out of indoor/outdoor cameras by clicking the CHANNEL button on the MENU bar. Note : - It is impossible to communicate between the system and the cameras as long as the DVRMaster (GUI) is being executed, even though t...

Stand-alone DVR Instruction Manual 44 6-7.6. OSD ON / OFF OSD ON /OFF is possible in the LIVE mode or RECORD mode. ▫ Click the OSD button on the MENU bar to turn the OSD (On Screen Display) ON or OFF. When the OSD is in OFF position, all the texts on the screen will be disappeared. [Fig.6-11 OSD ON ...

Stand-alone DVR Instruction Manual 46 ▫ Channel Selection and Screen Conversion To change a channel, press the CHANNEL button on the remote controller or click the CHANNEL button on the [Fig.6-15 PAN /TILT CONTROL window]. It will be converted a full screen. To return to the LIVE mode, press the SPL...

6. How to Operate 47 ▫ PRESET [Fig.6-15-1 Preset Menu] It is a function to preset the PTZ camera(s) which you wish to monitor frequently. Preset Setup - Select a position of camera you wish to preset and click the SET button in Fig.6-15-1. - Click the number(s) for the current position of camera. - ...

Stand-alone DVR Instruction Manual 48 6-7.8. SYSTEM STATUS ▫ Click the SYSTEM STATUS button on the MENU bar to see the system status as shown below (Fig.6-16). ▫ Click the (EXIT) button to return to the LIVE mode or RECORD mode. [Fig.6-16 SYSTEM STATUS button] [Fig.6-17 SYSTEM STATUS window]

Stand-alone DVR Instruction Manual 50 ▫ CLEAR LISTS button Click the CLEAR LISTS button to clear the lists, you will be prompted to confirm changes. When you click the OK button, the POWER LOSS LISTS will be deleted. To cancel, click the CANCEL button Fig.6-19 POWER LOSS LISTS Message

6. How to Operate 53 6-8. Record This system provides Watchdog function. When power goes off during recording and then the power turns on, the system will automatically start recording. 6-8.1. Manual (Continuous) recording ▫ Click the SETUP icon on the MENU bar in the LIVE mode. ▫ Click the RECORD b...

Stand-alone DVR Instruction Manual 54 The MOTION ( ) or SENSOR ( ) as shown in Fig.6-24 should be turned ON in this recording mode. ▫ Press the RECORD button on the remote controller or click the RECORD icon on the MENU bar. 6-8.3. Timer Recording ▫ Click the SETUP icon on the MENU bar in the LIVE m...

Stand-alone DVR Instruction Manual 56 6-8.5. Recording Icons The Recording Icons depends on recording modes are displayed in the upper left hand corner of the screen. ▫ To turn the Recording Icon OFF, click the DISPLAY ON in the RECORD menu and then it will be turned OFF. You can select the value ON...

Stand-alone DVR Instruction Manual 58 6-9.2.1. Playback Devices In order to payback, plug the USB devices such as external USB HDD, USB memory to the USB port or insert a recorded media (CD-R/W or DVD-R/W) into the DVD-R/W drive. When the devices are ready to playback, the Ready on the corresponding...

6. How to Operate 59 ▫ Select the hour on the Start Time Select Window (See Fig.6-32) by clicking the mouse on the Hour (0 – 23 hour) you wish to start to play. The green active buttons indicate the HOUR that contains recorded data, and the red active buttons indicate the selected Start HOUR. By usi...

Stand-alone DVR Instruction Manual 60 6-9.2.3. Replaying Replaying start time set-up can be possible within a recording time extent. ▫ Replay buttons (NORMAL / MOTION / SENSOR) NORMAL PLAY: Click the button to play all the recorded data. MOTION PLAY: Click the button to play the recorded data by MOT...

Stand-alone DVR Instruction Manual 64 6-10. COPY ▫ Click the COPY icon on the MENU bar, and then the COPY window as shown in Fig.6-38 will be displayed. ▫ Click the (EXIT) button to return to the previous mode. 6-10.1. Copying devices In order to copy the recorded data, plug the USB devices such as ...

Stand-alone DVR Instruction Manual 66 ① All channels, HOUR selection button. Click the arrow button on the upper left corner as shown in Fig.6-40 to set the full extent of the recording and all the channels simultaneously. ② HOUR selection button Select the start time to copy by clicking the mouse o...

Stand-alone DVR Instruction Manual 68 6-10.4. Copying the recorded data during replaying The system, LCD22164 allows users to copy the recorded data during replaying. ▫ Start replaying (See section 6-9). ▫ Right-click on the replaying screen, and the COPY DATA screen will be displayed (See Fig.6-43)...

71 7. SETUP CONTENTS 7-1. SETUP ............................................................................................................................... 74 7-2. SYSTEM ............................................................................................................................ ...

Stand-alone DVR Instruction Manual 72 CONTENTS 7-4. CAMERA ........................................................................................................................... 87 7-4.1. C AMERA ON/OFF ...............................................................................................

Stand-alone DVR Instruction Manual 76 7-2.1. TIME / DATE ▫ Click the “TIME/DATE” button in the SYSTEM menu, and then the TIME/DATE menu will be displayed (See Fig.7-4). ▫ Click the “EXIT” button to return to the SYSTEM menu. ▫ TIME FORMAT Click the mouse on the TIME FORMAT button to change and then ...

Stand-alone DVR Instruction Manual 78 7-2.2. SYSTEM CONFIG ▫ Click the “SYSTEM CONFIG” button in the SYSTEM menu, and then the SYSTEM CONFIG menu will be displayed (See Fig.7-10). ▫ Click the “EXIT” button to return to the SYSTEM menu. 7-2.2.1. FACTORY DEFAULT ▫ Click the “ FACTORY DEFAULT ” button ...

Stand-alone DVR Instruction Manual 80 ▫ BACKUP CONFIG This function is to save the current settings to load the settings to the system. Save the current settings in the BACKUP CONFIG in order to load it to the system in the near future whenever you need to change the settings. - Click the BACKUP CON...

7. Setup 81 7-2.3. PASSWORD ▫ ON/OFF Select ON or OFF by clicking the mouse. If the ON is selected, the password has to be entered to get into the SETUP mode, RECORD mode, COPY mode, REPLAY mode, and when trying to connect the network through the DVR Master . ▫ PASSWORD CHANGE Click the password “**...

Stand-alone DVR Instruction Manual 82 7-2.4. IR REMOTE ID Up to 16 DVR systems can be controlled by only one remote controller we provided, but IDs should be assigned on each of the systems. You don’t have to assign any ID on the single unit and you can control the system with the provided remote co...

Stand-alone DVR Instruction Manual 90 7-4.5. Pan/Tilt Settings ▫ Click the PAN/TILT button on the corresponding channels in the CAMERA menu, then the PAN/TILT window will be displayed as shown in Fig.7-33. ▫ Click the (EXIT) button to return to the CAMERA menu. ▫ PTZ ID - Click the PTZ ID button in ...

Stand-alone DVR Instruction Manual 92 ▫ Baud rate Click the “BAUD RATE” button in the PAN/TILT window and choose a value among 1200bps, 2400bps, 4800bps, 9600bps, 19200bps, 38400bps, 57600bps and 115200bps on the Baud Rate pop-up window by clicking the mouse. ▫ Data Bits Click the “DATA BITS” button...

7. Setup 97 7-6.2. All Manual / Timer recording button ▫ Click the All Manual / Timer recording button in the RECORD menu, then the All Manual / Timer recording button will be displayed as shown in Fig.7-55. ▫ Select the Manual Recording button or Timer Recording button for all the channels by click...

Stand-alone DVR Instruction Manual 98 7-6.3. All Motion ON / OFF, Sensitivity Setting ▫ Click the button in the RECORD menu, then the ALL MOTION setup pop-up window will be displayed as shown in Fig.7-57. ▫ By clicking the mouse, select the on the pop-up window (See Fig.7-57) to enable the system to...

Stand-alone DVR Instruction Manual 100 7-6.6. Recording Speed ▫ Click the F/S (Frames Per Seconds: Recording Speed) button on each of the channels in the RECORD menu, then the Recording Speed pop-up window will be displayed as shown in Fig.7-64. ▫ Select one of the Recording Speed among AUTO, 30, 15...

7. Setup 101 30 25 15 12 10 8 7.5 6 5 5 3 3 2 2 1 1 NTSC OFF PAL OFF 7-6.7. Recording Quality ▫ Click the QUALITY button on each of the channels in the RECORD menu, then the QUALITY pop-up window will be displayed as shown in Fig.7-67. ▫ Select one of the Recording Quality among LOW, NORMAL, HIGH an...

Stand-alone DVR Instruction Manual 102 7-6.8. Recording Mode The factory default setting for Recording is the Manual Recording (or called Continuous Recording), which keeps recording continuously if the OVERWRITE is set ON in the DISK MANAGE menu. This Manual Recording mode is not only one of the mo...

Stand-alone DVR Instruction Manual 104 ▫ Pre-Alarm Time Setup Allows you to record a section of video just prior to Motion or Sensor activation. Click the mouse on the PRE in the MOTION menu and choose one of the values among 0, 1, 2, 3, 4 and 5 seconds with the mouse’s wheel, and then click it to s...

7. Setup 105 ▫ Spot Setup If the “ON” is selected by clicking the mouse on the SPOT button in the MOTION menu, a full screen will display when a motion is detected. If the “OFF” is selected, the full screen won’t be displayed even though motion of objects is detected. ▫ Region The Motion Detection A...

Stand-alone DVR Instruction Manual 106 - All Clear Click the ALL CLEAR button in the MOTION menu in order to clear the Motion Detection Area, then the window turns to white color as shown in Fig.7-77. Right-click on the current window to return to the MOTION menu. [Fig.7-76 ALL CLEAR button] [Fig.7-...

7. Setup 107 By Window Set Click the WINDOW SET button in the MOTION menu on each of the cameras and click one of cells (1,320 cells in total) for the starting point of the area which you would like to designate, and then click the other one of cells for the ending point of area until the motion det...

Stand-alone DVR Instruction Manual 108 - Window Clear Click the WINDOW CLEAR button in the MOTION menu in order to clear the Motion Detection Area, and then the motion detection area you have created will be displayed. Click the starting point and the ending point as much as you wish to clear or it ...

7. Setup 109 By Each Cell Click the EACH CELL button in the MOTION menu on each of the cameras and click the mouse on each of the cells as much as you would like to designate the Motion Detection Area. To clear, click the designated cells. Right-click on the current window to return to the MOTION me...

Stand-alone DVR Instruction Manual 110 ▫ Map View Click the MAP VIEW button in the MOTION menu to view the current settings for Motion detection area. Right-click on the current window to return to the MOTION menu. Note : Please pay attention to the following directions in order to use the Motion De...

Stand-alone DVR Instruction Manual 114 7-7. NETWORK ▫ Click the “NETWORK” button in the SETUP menu and then the NETWORK menu will be displayed on the screen as shown in Fig.7-92. ▫ Click the (EXIT) button to return to the SETUP menu. 7-7.1. IP Mode When the system uses the same IP address every time...

Stand-alone DVR Instruction Manual 116 7-7.3. Port ▫ PORT is the TCP address of the program, which is used to connect to the network viewer. It can be set from 1 to 65535 values. ▫ Click the PORT button and then the On Screen Keyboard will show up. ▫ Delete the current port number with the button an...

7. Setup 119 7-7.6. DDNS (DYNAMIC DOMAIN NAME SYSTEM) ▫ Select the DDNS button in the NETWORK menu by clicking the mouse or pressing the buttons on the remote controller. The DDNS menu will show up as shown in Fig.7-103. ▫ To return to the NETWORK menu, Click the (EXIT) button. ▫ If you were in the ...

7. Setup 121 7-7.7.2. Registration to the DDNS server Visit at www.dyndns.org to register. Registration to DYNDNS.ORG 1. Visit at www.dyndns.com . 2. Sign up for a new user name and a password: Click the Create Account on the upper right hand corner. 3. After signup new user, check your e-mail and c...

Stand-alone DVR Instruction Manual 124 ▫ EVENT Setup - Click the check boxes below to choose the events you need. - To delete, click the check box again. [Fig.7-111 Event setup] ▫ INTERVAL TIME Setup - Click the INTERVAL TIME (see Fig.7-112) to set the interval time of sending emails and then choose...

Stand-alone DVR Instruction Manual 126 7-8. VIDEO ENHANCE ▫ Click the VIDEO ENHANCE button in the SETUP menu to enhance the picture quality (Contrast and Brightness) on each of channels and then the VIDEO ENHANCE menu will show up (See Fig.7-113). ▫ To return to the SETUP menu, click the (EXIT) butt...

Stand-alone DVR Instruction Manual 128 7 -8.2. VIDEO ENHANCEMENT ON VGA OUTPUT It is possible to enhance VGA signals only with the MENU/ENTER key on the bottom of the system. ▫ To display the MENU, press the MENU/ENTER key to change the values. The changes should be made in about 15 seconds. After t...

Stand-alone DVR Instruction Manual 132 8-2. Installing the Program to PC Install the program into PC by using program CD (supplied) as follows. How to install the program 1. Start the operating system (Windows 2000/XP/VISTA). 2. Insert the program CD into CD-ROM drive. 3. Open My Computer , and then...

8. Remote Host Program 133 8-3. Internet Explorer When you are trying to use this function, it is highly recommended that the password should be turned ON in the SYSTEM menu not to enable unauthorized personnel to access your DVR system (See section 7-2.3). Up to 10 users can remotely access your DV...

Stand-alone DVR Instruction Manual 134 • Click on the following message. This site wants to install the following add-on: ‘DVR Master’ from ‘Clover Electronics USA’. If you trust the website and the add-on and want to install it, click here…. • Click the click install ActiveX Control …. on the pop-u...

Stand-alone DVR Instruction Manual 136 Table. Description of Remote Host Program Button ① Minimization Button ② Close Button ③ Current Time ④ Connection Button ⑤ Setup Button ⑥ Player Execution Button ⑦ Capture Button ⑧ Multi-Mode ⑨ Terminal Mode ⑩ E-map Button ⑪ Splits the screen in 4, 9 & 16ch...

8. Remote Host Program 137 8-4.1. Setup ① Version number It represents the current version number of the Firmware. ② Copy Refer to Section 8-4.10 in regards to copying methods after selecting one between the Quick Copy and the Live + Copy. ▫ Quick Copy Click on the Quick Copy for faster copying the ...

8. Remote Host Program 143 8-4.5. Replay It is possible to replay the recorded data from the DVR system by using the Replay button in Fig.8-10 in the Multi mode only (refer to section 8-4.9.2). - Click the Replay button as shown in Fig.8-10 to playback the recorded data from the DVR system, and then...

Stand-alone DVR Instruction Manual 144 ▫ Playback Control Playback control buttons : Button for fast rewinding up to 128 times by repeatedly pressing. : Button for viewing previous frame in still image. : Play button. : Button for viewing the next frame in still image. : Button for fast forwarding u...

8. Remote Host Program 145 8-4.6. COPY It is possible to copy the recorded data from the DVR system to a client PC by using the Copy button in Fig.8-13 in the Multi mode only (refer to section 8-4.9.2). - Click the Copy button as shown in Fig.8-13 to copy the recorded data from the DVR system to a P...

Stand-alone DVR Instruction Manual 146 “ALL” in yellow represents that all the cameras are selected. The camera channel number(s) in yellow represents that the corresponding channel(s) are selected. - Click the Copy ( ) button and then the copying progressive bar as shown Fig.8-15 will show up. - Wh...

8. Remote Host Program 147 8-4.7. Switch the Normal Screen to Full Screen ▫ Click the “FULL SCREEN” button on the DvrMaster as shown Fig.8-16 and then the current screen size will be enlarged to fit the monitor’s screen size, but the resolution will be lowered. ▫ Click the “FULL SCREEN” button again...

Stand-alone DVR Instruction Manual 148 8-4.8. Speaker / Microphone Buttons of Remote Host Program ① Audio Input channel selection: Select the same audio channel as the DVR has. ② PC Speaker ON/OFF: Turn the Speaker ON or OFF by clicking the mouse. ③ PC Microphone ON/OFF: Turn the Microphone ON or OF...

8. Remote Host Program 149 8-4.9. Connection mode There are two kinds of connection mode (See Fig.8-19) on the DvrMaster. Select one of them by clicking the mouse depending on your application. 8-4.9.1. Terminal mode The functions of icons such as Recording, Play, Copy, Setup, System Status, Pan/Til...

Stand-alone DVR Instruction Manual 150 8-4.9.2. Multi mode It is impossible to control (Recording on/off, Setup, System Status, Display and OSD) the DVR system in the Multi mode except Replaying and Copying (See section 8-4.5, 8-4.6 on page 143-145 ), but the image of channel 16 will always display ...

8. Remote Host Program 151 8-4.10. Copy in the Terminal mode There are four icons such as NETWORK, USB, CD and DVD in the COPY menu of the Multi mode. The recorded data will be saved in the Backup Files (Open Windows Explorer – click My Computer - click the Program Files – click DvrMaster – click Ba...

Stand-alone DVR Instruction Manual 154 - To rename, right-click a saved eMap list and click “Rename” on the pop-up window as shown in Fig.8-27 . - To delete, right-click a saved eMap list and click “Delete eMap” on the pop-up window as shown in Fig.8-28 . - To display, double-click one of saved eMap...

8. Remote Host Program 155 8-4.11.3. Usage of camera position The small squares with channel numbers on the map indicate the camera position. The blue screen represents that the corresponding camera is not connected to the DVR system. - Double-click the image to display a full screen. - To change th...

Stand-alone DVR Instruction Manual 156 8-4.12 Pan / Tilt & Preset You can control the PTZ camera through DvrMaster. This feature is basically identical to what the DVR system has. Refer to section 6-7.7 PAN/TILT on page 45 . [Fig.8-32 PAN / TILT] PRESET / RUN FOCUS ZOOM PAN / TILT CHANNEL SELECT

Stand-alone DVR Instruction Manual 158 ① Status window (Play mode, Date, Time) It indicates the play mode, date and time. ② Calendar It shows the date currently being replayed. [Fig.8-34 Calendar] ③ Convert AVI File Convert the recorded files to AVI files. - Click the Convert AVI button on the Playe...

Stand-alone DVR Instruction Manual 160 [Fig.8-38 Select one of the Channels] [Fig.8-39 Start Convert Button] How to play the AVI files By using Windows media player: - Click the OPEN button on the Convert AVI window and double click one of the AVI files to play. The AVI files will save in the AVI Fi...

8. Remote Host Program 161 ④ Search button for Replaying - Click the Search button on the Player and the Browse for Folder will be displayed. - Select the folder that contains the recorded data and click the OK button on the Browser for Folder. One channel or all the channels can be replayed dependi...

Stand-alone DVR Instruction Manual 162 ⑦ Video Enhance Refer to section 8-4.1 on page 137. ⑧ Division button Select one of the following divisions while replaying. ⑨ Playback (Replay) Speed Control Move the slider with the mouse to control the replaying speed. The “0” represents the normal speed, “-...

164 9. HDD Installation CONTENTS 9-1. HDD (HARD DISK DRIVE) INSTALLATION...................................................................... 165 9

9. Installation of additional HDDs 165 9-1. HDD (Hard Disk Drive) INSTALLATION The system manufacturer already installed a large space of Hard Disk Drive (refer to the retail box for capacity) in the system. Just in case, refer to the following explanation on how to install a HDD. ▶ The power switch...

Stand-alone DVR Instruction Manual 166 ▶ After pushing the HDD to the left and securely fix the bracket to the system with two screws. Connect the power connector and the data cable to the HDD. ▶ After pushing the HDD to the right and securely fix the bracket to the system with two screws.

9. Installation of additional HDDs 167 ▶ Assemble the HDD cover and securely fix it to the system with two screws. ▶ Plug the AC power cord to the system and an AC outlet. Turn on the power switch on the back of the system and the following window will be displayed. Check the power cable and the dat...

Stand-alone DVR Instruction Manual 168 ▶ Update the Firmware with USB memory (or CD-RW/DVD-RW). - Copy the Firmware to USB memory (or CD-RW/DVD-RW). -Plug the USB memory to USB Port of the system and select USB/CDRW/DVD on the following window. ▶ If the Firmware is detected, the Firmware lists will ...

169 APPENDIX CONTENTS RECORDING TIME TABLE .....................................................................................................170 FACTORY DEFAULT SETTINGS ............................................................................................171

Stand-alone DVR Instruction Manual 170 Recording time table HDD : 750GB , Based on 16 cameras Recording Resolution : CIF(360 X 240) DAYS 30 fps 15 fps 10 fps 7.5 fps 5 fps 3 fps 2 fps 1 fps (480fps) (240fps) (160fps) (120fps) (80fps) (48fps) (32fps) (16fps) Each CH (16CH/fps) BEST 18.22 36.44 54.66 ...

171 Factory default settings (1) LIVE SCREEN 16 SPLIT OSD ON (2) TIME / DATE DISPLAY : ON TIME FORMAT : 24 HOUR DATE FORMAT : YYYY/MM/DD (3) LOAD / BACKUP CONFIG NONE LISTS (4) USER ACCOUNT PASSWORD : SET YOUR PASSWORD ( THE PASSWORD IS NULL ) PASSWORD ON/OFF : OFF (5) IR REMOTE ID OFF (6) HDD OVERW...

Stand-alone DVR Instruction Manual 174 FAQ CONTENTS I CANNOT LOGIN ...................................................................................................................175

175 I can not login ▶ Please check if the link LED of DVR and LAN port of PC are lit. ▶ Please check if the IP address on DVR and the PC is identical. Check SYSTEM STATUS by pressing STATUS button of DVR (Available on LIVE mode and RECORD mode.) MY IP : xxx.xxx.xxx.xxx Check Target IP Address by cli...

Stand-alone DVR Instruction Manual 176 Limited 1Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state to state. If our products do not function because of any defect in material or workmanship, we will repair it f...

177 How to obtain Factory Service • Original purchaser must fill out the warranty card and mail it to the factory with the model number, serial number and the date of purchase. • We will repair or replace, and return the system to the owner under this limited warranty. • Please pack the system caref...