Page 2 - SAFETY PRECAUTIONS; EXPLANATION OF SYMBOLS; WARNING; CAUTION
2 SAFETY PRECAUTIONS EXPLANATION OF SYMBOLS WARNING To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. CAUTION Changes or modifications not expressly approved by the manufacturer may void the user ’s authority to operate this equipment. CAUTION Danger of expl...
Page 5 - Main features
5 Main features z H.264 Video compression z TRIPLEX operation (recording, playback, and networking) z Instant and convenient data backup & firmware upgrade using USB flash drive z Simple user interface z Individual channel setting and operation z Motion detection
Page 6 - System components and Installation; Requirements for installation and safety; Main replacement parts
6 System components and Installation Requirements for installation and safety This chapter is for the requirements for safe installation and use. This kit should be installed on a flat table or in a rack. The location in which the DVR is installed in the room is very important for proper operation o...
Page 7 - Components of DVR Package; DVR Set; User Guide
7 Components of DVR Package The package contains the main unit and its components as specified below. When you purchase the package, please check to ensure the components specified below are included. DVR Set Remote Control Battery1.5V (AAA x 2EA) Adaptor and Power cable Client Software CD User Guid...
Page 8 - Basic function of the MOUSE; Mounting the HARD DISK
8 Basic function of the MOUSE ¢ : Left button: SELECT function £ : Right button: ESC function ¢ : Double click: Go to sub menu Mounting the HARD DISK 1. Unfasten the cover of the unit. 2. Fix the supplied HDD mounting bracket to the hard disk using the supplied mounting bracket screws. 3. Connect th...
Page 9 - SPECIFICATIONS
9 SPECIFICATIONS ITEM 4CH 8CH 16CH Video Input Channel, Input Level 4CH, Composite 8CH, Composite 16CH, Composite Signal Format NTSC/PAL Video Loss Check Yes Output Main Monitor Output 1 CH BNC, 1CH VGA: Selectable Signal Format NTSC/PAL & VGA Audio Input & Output 4 CH Line input & 1 CH ...
Page 10 - Compatible HDD Models
10 Termination Yes Network Dynamic DNS Yes (Free DDNS) Network Interface 10/100 base-TX Ethernet (RJ-45) Network Access Client Software (1:1) Live, Search, Backup, PTZF Camera Control Web viewer (1:1) Live, Search, Backup, PTZF Camera Control Multi-sites Monitoring System (1:n) Live, Search, Backup,...
Page 11 - INDEX
11 INDEX 1. NAME & FUNCTION ..................................................................................................... 14 1-1. Front panel ............................................................................................................................................... 14...
Page 14 - Direction button
14 1. NAME & FUNCTION 1-1. Front panel ཛ SEQ: To start auto sequencing of the screen in full screen mode. (Toggle) ཛྷ PTZ: To control PTZ operation ཝ SETUP: To launch SETUP menu. ཞ CAPTURE: To start operations of backup in live or playback mode. ཟ SEARCH: To go to the search menu. འ REC: To start...
Page 15 - Operation range
15 1-2. Remote control ཛ ID: When a remote control ID number is set in DVR, press it before number. ཛྷ REC: To start and stop manual recording. ཝ Number: To select channel (1, 2, 3, & 4) or to enter DVR ID number. ཞ F/REW: During playback - To move the playback position 60 seconds backward. Durin...
Page 16 - -3-1. Basic connections
16 1-3. Rear panel and connection 1-3-1. Basic connections 4CH 8CH 16CH z Do not power this system on before all the connections are completed. z Make sure all the connections are properly. Faulty connection may result in the system being damaged. z The DC plug of the AC adaptor is easy to be unplug...
Page 17 - LAN Connection – Using a switching hub
17 ཛ Cooling fan ཛྷ AUDIO IN: Audio input terminal (* Use the audio cable which is provided with the 16ch dvr package) ཝ AUDIO OUT: Audio output terminal (* Use the audio cable which is provided with the 16ch dvr package) ཞ VIDEO IN: Video input terminal ཟ VIDEO OUT: Video output terminal འ VGA: VGA ...
Page 18 - ADSL Modem
18 1-3-3. Sensor and alarm connections SENSOR INPUT : Connect two signal lines of sensor (infrared ray sensor, heat perception sensor, magnetic sensor) to the desired sensor number. NOTICE SENSOR inputs need dried contact only. Do not input any electric signal. IP Router or HUB Internet NOTICE If yo...
Page 19 - ALARM OUTPUT
19 ALARM OUTPUT : Use Maximum current: 0.5A/125VAC, Maximum voltage: 1A/30VDC . When controlling lamp and AC operated equipment, control it using separate outside relay. During normal operation the control output contact is maintained at “Open” status, and during control output the output contact is...
Page 20 - Setting up the DVR
20 1-4-2. VGA: Select VGA to connect computer VGA monitor 2. Setting up the DVR The following sections detail the initial setup of a DVR. 2-1. Setup – Main Screen To enter the setup menu, select MENU and SETUP on the screen using the mouse or press the SETUP button on the front panel. Then select a ...
Page 25 - Fixed-available on only from channel 1 to channel 4.
25 for all channels. (FRAME RATE, QUALITY, RECORDING, PRE REC, POST EVT REC) FRAME RATE Set the frame rate for the specified channel. The sum of the frame rate values from each channel cannot exceed the maximum frame rates for a specific recording resolution. Typical values of the maximum frame rate...
Page 37 - DDNS; DDNS SERVER NAME; DDNS INTERVAL
37 DDNS Enable/disable using domain name address through DDNS server. “ON” mode, DDNS server name appears for domain registration. DDNS SERVER NAME : The DDNS sever name is bestddns.com. CAUTION : Do not change this sever name. If this is changed, the DDNS service cannot be available. DDNS INTERVAL ...
Page 39 - Item; PASSWORD
39 2-8-2-2. DHCP An IP address is automatically assigned by the DHCP server, which automatically assigns IP address and other parameters to new devices. When ADSL or other network being used adopts variable IP method, not fixed IP. This option is used as a way to automatically get IP address. Figure...
Page 45 - ൖ ൘; Play: Double click on each channel number or ALL
45 4-2. SEARCH Screen To enter the search screen, select MENU and SEARCH on the screen using the mouse or press SEARCH button on the front panel in live mode. When you press the SEARCH button, DVR asks for a password as in Figure 4-2-1. Figure 4.2.1. Search Screen Enter the password using the contro...
Page 46 - Note; : The recording mode is indicated as color on the time line screen.
46 4-2-1. TIME-LINE Search The TIME-LINE search window is used to find the stored video by using the time line bar. Figure 4.2.2. Time-line Search 1. Select the date of the video to begin searching and navigate through the days using the control button ( ൖ Ÿ ൘ ź ). 2. Once you have selected the date...
Page 50 - Item Description
50 5. PTZ Control To control the PTZ functions of the camera, select MENU and PTZ on the screen using the mouse or press the PTZ button on the front panel. Select the item you wish to control the PTZ camera and control them using the control button ( ൖ Ÿ ൘ ź ). Please refer to the table 5.1.1. for t...
Page 52 - -1. Still Image backup onto USB flash memory
52 6. Back up 6-1. Still Image backup onto USB flash memory Still images can be captured and archived onto the USB stick or hard drive in live mode or while playing back recorded video. In live mode, press the BACKUP button to launch the archive function or select MENU and BACK UP on the screen usin...
Page 53 - -3. Transferring still images or video from the ARCHIVE list
53 Figure 6.2.1. Video Archiving and Backup Screen The DVR will convert the corresponding portion of the video into an AVI file. 6-3. Transferring still images or video from the ARCHIVE list The stored data onto hard drive will be found in the ARCHIVE list in SEARCH window. User can back up still im...
Page 55 - Upgrading Firmware; NOTICE
55 7. Upgrading Firmware In order to upgrade, the firmware upgrade file must first be downloaded and copied into the USB memory stick. Create a new folder in the USB memory stick and name it “upgrade”. Copy the firmware upgrade file “apph_xxxxxx.bin” for 16CH DVR, “apph_xxxxxx.bin” for 9CH DVR or“ap...
Page 56 - Network access using the Exclusive network viewer; “UMS Client”
56 8. Network access using the Exclusive network viewer The DVR provides a live remote monitoring feature. Remote monitoring requires installation of the network viewer on your PC. NOTICE In a high bandwidth network, a maximum of four users can access one DVR simultaneously. In a low bandwidth netwo...
Page 58 - AUDIO; LOG WINDOW
58 AUDIO Adjust the volume. The audio can be turned on or off by clicking the audio icon. LOG WINDOW Operations of the display mode of the main screen Single channel display - Click the one of channel button or double-click the channel screen. QUAD/-screen display - Click the QUAD button to swit...
Page 61 - Backup of video in the remote DVR
61 4. Press the PLAY button. Then the video recorded in the remote DVR is played back. Backup of video in the remote DVR Video recorded in the remote DVR cab be backed up on the PC HDD as AVI format. 1. Connect the network to the remote DVR and play the video recorded in the remote DVR. 2. Drag the ...
Page 63 - Setting Event; Setting Record
63 Setting Event Set the record path and the size of local disk space for the log files. z LOG – Select to save event log into ‘log file’. z ICON – Select to display the event on live video. z EVENT LIST – Select to show the event in the ‘Event List” window of live mode. Search and check the recorde...
Page 66 - Network – By Mobile phone viewer; ip address
66 10. Network – By Mobile phone viewer User can access the remote DVR over mobile phone (i-Phone). User doesn’t need to install specific exclusive viewer or specific codec on the mobile devices. User can monitor video in jpeg format on the browser. 1. Enter the IP address on the URL address window ...
Page 68 - APPENDIX: How to connect network; A. How to set IP address of the DVR and open TCP port of the router?
68 APPENDIX: How to connect network A. How to set IP address of the DVR and open TCP port of the router? The port forwarding is dependent on the brand and model of the router. The port forwarding is required to allow access to the DVR beyond a router. 1. Connect network cable between DVR and Router ...
Page 69 - admin; OK; Network access beyond a router
69 5. Open your web browser. Enter the router IP address in the address bar (The router IP address are different with the brand and model.), click GO. 6. Enter the user name and password ( admin is default) and press the OK button. 7. Select the Port Range Forwarding tab. 8. Enter the each field. i....
