Page 3 - Table of Contents; CONNECTION OF VGA MONITOR
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 3 Table of Contents ABOUT THIS MANUAL ............................................................................................ 7 1. UNPACKING ..................................................................................
Page 11 - WHAT TO DO AT THE TIME OF INSTALLATION; The system should be installed in the following order; Make sure all the required hardware is available.; CAMERA CONNECTION
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 11 3. WHAT TO DO AT THE TIME OF INSTALLATION The system should be installed in the following order; 1. Make sure all the required hardware is available. - CDR0460/ 0860/ 1660, 4CH/ 8CH/ 16CH DVR - Up to 4/ 8/ 16 cameras - CCT...
Page 15 - OVERVIEW AND CONTROLS; This key allows the user to access the Main Menu Screen.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 15 5. OVERVIEW AND CONTROLS There are 3 ways to operate the system by pressing the buttons on the front panel or buttons on the remote controller and clicking the mouse. 5.1. FRONT PANEL 1. REC Key Press this key to start to ...
Page 24 - INSTALLATION AND CONNECTIONS; system near heat generation devices.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 24 6. INSTALLATION AND CONNECTIONS 6.1. NOTE FOR INSTALLATION Install the system according to the instructions described in this manual. Avoid any area with high humidity or dust which can shorten lifetime of the system. ...
Page 26 - No DESCRIPTION; Transmit
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 26 6.5. ALARM (RELAY) CONNECTION If you want, you can install alarm on your DVR system. There is one alarm power switch, which is controlled by the DVR. The ALARM OUTPUT is a relay contactor type and supports N.O.(Normal Open...
Page 28 - REMAINING HARD DRIVE SPACE / PLAYBACK STATUS
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 28 7. HOW TO OPERATE 7.1. GENERAL INFORMATION You can operate all functions of the system by use of buttons located on the front panel, remote controller and a mouse. Additionally, you can control this unit with an external k...
Page 35 - RECORDING; Click the
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 35 7.6.2. MOTION RECORDING Motion recording is yet another effective form of event recording that is triggered when a channel detects motion in its field of view as the H.264 compression algorithm allows for accurate and erro...
Page 45 - * Recommended Medias
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 45 To start the playback, double-click the desired event or highlight the desired event using the ▲ , ▼ , ◀ , ▶ buttons and then press the ENTER button of the remote controller or the front panel. The example to the left is p...
Page 50 - RECOMMENDED USB BRANDS; Standard USB A type
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 50 And you can see the playback image of the selected file like the left picture. RECOMMENDED USB BRANDS The USB 2.0 flash memory comes in various sizes, up to 8 Gigabytes of storage per flash memory. It is much faster in com...
Page 52 - buttons; DVD RAM; on page 45 for more detail explanation of
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 52 Double-click YES to stop the backup process. Or in case of using the remote controller or the front panel buttons, highlight YES using the ▲ , ▼ , ◀ , ▶ buttons and then press the ENTER button. 7.8.6. FULL MEDIA CAPACITY D...
Page 57 - Manufacturer Model
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 57 b) COVERT (CAMERA ON/OFF) Each camera can be convert by setting ON or OFF in the CAMERA menu. The covert function is available in the live mode. Click the COVERT ON/OFF button of the desired channel and select ON or OFF. O...
Page 74 - VALUES; buttons and
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 74 8.3.5. FACTORY DEFAULT SETTING At the SYSTEM menu, Double-click FACTORY DEFAULT SETTING or highlight FACTORY DEFAULT SETTING and then press the ENTER button and the FACTORY DEFAULT window will be displayed like the left pi...
Page 82 - DVR VIEWER
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 82 9. CLIENT PROGRAM : DVR VIEWER The DVR Viewer is a dedicated client program that connects to, monitors and manages up to 16 DVRs simultaneously. 9.1. SYSTEM REQUIREMENT The DVR Viewer receives, decodes and displays data fo...
Page 83 - Click on ‘INSTALL’ for installing the program.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 83 The DVR viewer will be installed in its default folder of C:\Program Files\DVR\DVR-Viewer. If the folder needs to be changed, click on ‘BROWSE…’ button and then select a different folder. Click on ‘INSTALL’ for installing ...
Page 86 - Table. Description of DVR VIEWER Program.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 86 9.2. VIEWER - LAYOUT Locate the DVR Viewer icon on the desktop and double-click on it to run the client software. The program can also be located in START- Programs – DVR-Viewer. CDR0460 (4channel) NOTE : This unit can sup...
Page 87 - Version Number; Display the current version of the DVR Viewer program.; COPY; Quick Copy
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 87 9.3. CONFIG ① Version Number Display the current version of the DVR Viewer program. CDR0860 (8channel) CDR (16channel) NOTE: CDR0860 /CDR1660: It can be seen in information of the 8channel or 16channel ② COPY Copy and the ...
Page 88 - Video Enhance
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 88 ③ Video Enhance User can adjust the Brightness of screen by clicking on the bar or dragging the slider on the bar. User can adjust the Contrast of screen by clicking on the bar or dragging the slider on the bar. User can a...
Page 89 - New button; User should enter the IP address of the connected DVR.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 89 9.4. CONNECTION Click on the CONNECT button of the DVR VIEWER. By clicking the Connect button, the below window pops up. Click on the New button , the below screen appears. ] a) DVR NAME User can enter the DVR Name as he d...
Page 90 - By clicking the; CAPTURE icon
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 90 DVR. Once the User enters the above details, he can save the data by clicking on the SAVE button. 9.5. CAPTURE User can take a snapshot in the Live mode by clicking on the CAPTURE icon as shown in the below screen. By clic...
Page 98 - Switch the Normal Screen to Full Screen
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 98 9.8. COPY It is possible to copy the recorded data from the DVR system to a client PC by using the Copy button in the Multi mode only. Click the Copy button to view the below screen. To copy the recorded data from the DVR ...
Page 99 - ) CHANNEL SELECT Button; Zoom in and out by clicking on the Tele and Wide buttons.; control
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 99 9.10. Pan / Tilt and Preset Buttons User can control the PTZ camera through DVR Viewer. Please refer to the below diagram for more detailed explanation on PTZ functions. 1) CHANNEL SELECT Button User can select the desired...
Page 100 - Functions
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 100 5) PRESET Functions User can set a maximum of 255 preset positions. By clicking on the Move button, User can move the camera to the desired location. User can save the Preset positions by clicking on the Save button. 6) S...
Page 104 - Refer to chapter; VIEWER; on page 82 for operating the web browser.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 104 You can execute “Web browser” now. Enter the IP address or Mac address to connect the DVR. Refer to chapter 9. CLIENT PROGRAM: DVR VIEWER on page 82 for operating the web browser.
Page 106 - TIME ZONE LISTING
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 106 12. APPENDIX CONTENTS 12.1. TIME ZONE LISTING 12.2. RECORDING TIME TABLE 12.3. FACTORY DEFAULT SETTINGS 12.4. Warranty & Factory Service 12.1. TIME ZONE LISTING GMT-12:00 International Date Line West GMT-11:00 Midway ...
Page 108 - Based on 4 cameras
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 108 12.2. RECORDING TIME TABLE HDD : 500GB , Based on 4 cameras IMAGE SIZE IMAGE QUALITY 1CH Record Size Use HDD Capacity (MB)hr RECORD POSSIBILITY DAY/500 GB 720 X480 BEST 67 936 22 720 X480 FINE 59 832 25 720 X480 NORMAL 41...
Page 111 - SYSTEM LOG
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 111 SYSTEM LOG SYSTEM INFORMATION LINK NETWORK DHCP OFF STATIC IP IP ADDRESS 192.168.0.2 SUBNET MASK 255.255.255.0 GATEWAY 192.168.0.1 DNS 0.0.0.0 PORT 5400 DDNS SERVER SERVER 1 211.174.251.155 SERVER 2 211.174.251.160 BANDWI...
Page 112 - number, serial number and the date of purchase.
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6 112 12.4. Warranty & Factory Service Limited 2Year Warranty This warranty gives the original purchaser specific legal rights and you may also have other rights, which may vary from state to state. If our products do not f...
Page 113 - Copyright
INSTRUCTION MANUAL 3D-DNR DAY/NIGHT COLOR DOME CAMERA MODEL HDC238 Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved.
Page 116 - To avoid fire or shock hazard, use a UL listed power supply.; TROUBLE SHOOTING
If the camera does not function properly, check the following points before contacting the service center. Troubles Remedies No video Check the AC adapter and video cable between the camera and a monitor The image on the screen is dark Check the brightness control on the monitor The image on the scr...