Cisco XO - Manuals - manualsarea.com

Page 2 - Installation Instructions; a) Obtaining Login Information; VPN Administrator Account:; (will also work for logging in as a remote client); Login Information for Remote Access Client

Installation Instructions a) Obtaining Login Information i) XO Engineers will send an email containing login information and passwords. (1) Example: Thank you for choosing XO as your Managed Security Services Provider! Included in this email are the usernames and passwords you will need to use your ...

Page 7 - g) Configuring the Cisco VPN Client

g) Configuring the Cisco VPN Client i) Navigate to the installed client by going to Start Æ Programs Æ Cisco Systems VPN Client Æ VPN Client ii) Click on “New” iii) Choose a name for the connection, and then refer to the email sent by the XO Managed Security Engineer to fill in the rest of the requi...

Page 8 - h) Using the Client to connect to your XO VPN

(1) This tab is used for configuring access from a Private, or non-routable IP (RFC 1918). Not all XO VPN security devices will support this feature. Contact your Managed Security Engineer for clarification. v) Click “Save” h) Using the Client to connect to your XO VPN i) Navigate to Start Æ Program...

Page 9 - (1) Select “Route Details” to confirm privately routed subnets.; i) Enjoy your XO VPN Remote Access Client!

v) Right click on the lock and select “Statistics”. This will give you the tunnel information, including the virtual IP of your PC and the number of packets that have passed through the encrypted tunnel. (1) Select “Route Details” to confirm privately routed subnets. i) Enjoy your XO VPN Remote Acce...

Page 10 - Frequently Asked Questions; Will this client work behind a NAT’d connection?; Encapsulation Security Payload (ESP) – IP 50

Frequently Asked Questions 1. Does this client work with PPPoE? Yes. However, you cannot install the client when the PPPoE session is live. Disconnect DSL/PPPoE session, install the client, reboot your machine, reconnect the DSL session, and then run the client. 2. Will this client work behind a NAT...

Page 11 - Once logged on to the remote access client, go to Windows Explorer; What; Run

6. Does this client support Windows Networking? Yes. Please provide the WINS or Active Directory server IP, DNS information, and domain to your security engineer and he/she will configure the policy for you to support Windows Networking. 7. I get a pop up saying the driver for the Cisco client has n...

Page 12 - I can connect with the client, but I cannot join my Windows domain.

Copyright 2004 XO. All rights reserved. XO and the XO design logo are trademarks of XO Communications, Inc . 11 4. Confirm that “Transparent Tunneling” is selected using IPSec over UDP in the properties menu, and reconnect with the client Check to make sure there is no local firewall configured on y...