Cisco WRT110 - Manuals

Chapter 1 Product Overview 4 RangePlus Wireless Router Chapter 1: Product Overview Thank you for choosing the Linksys RangePlus Wireless Router. The Router lets you access the Internet via a wireless connection or through one of its four switched ports. You can also use the Router to share resources...

Chapter 1 Product Overview 5 RangePlus Wireless Router Wall-Mounting Placement The Router has two wall-mount slots on its bottom panel. The distance between the slots is 152 mm (6 inches). Two screws are needed to mount the Router. Suggested Mounting Hardware 2.5-3.0 mm 4-5 mm 1-1.5 mm Note: Mountin...

Chapter 2 Wireless Security Checklist 6 RangePlus Wireless Router Chapter 2: Wireless Security Checklist Wireless networks are convenient and easy to install, so homes with high-speed Internet access are adopting them at a rapid pace. Because wireless networking operates by sending information over ...

Chapter 3 Advanced Configuration 7 RangePlus Wireless Router Chapter 3: Advanced Configuration After setting up the Router with the Setup Wizard (located on the CD-ROM), the Router will be ready for use. However, if you’d like to change its advanced settings, use the Router’s web-based utility. This...

Chapter 3 Advanced Configuration 8 RangePlus Wireless Router Static IP If you are required to use a permanent IP address to connect to the Internet, select Static IP . Internet Connection Type > Static IP Internet IP Address This is the Router’s IP address, when seen from the Internet. Your ISP w...

Chapter 3 Advanced Configuration 9 RangePlus Wireless Router automatically re-establish your connection as soon as you attempt to access the Internet again. To use this option, select Connect on Demand . In the Max Idle Time field, enter the number of minutes you want to have elapsed before your Int...

Chapter 3 Advanced Configuration 10 RangePlus Wireless Router the best MTU for your Internet connection, keep the default setting, Auto . Size When Manual is selected in the MTU field, this option is enabled. Leave this value in the 1200 to 1500 range. The default size depends on the Internet Connec...

Chapter 3 Advanced Configuration 11 RangePlus Wireless Router be automatically assigned a new dynamic IP address. The default is 0 minutes, which means one day. Static DNS 1-3 The Domain Name System (DNS) is how the Internet translates domain or website names into Internet addresses or URLs. Your IS...

Chapter 3 Advanced Configuration 12 RangePlus Wireless Router E-mail Address, TZO Key, and Domain Name Enter the settings of the account you set up with TZO. Internet IP Address The Router’s Internet IP address is displayed here. Because it is dynamic, it will change. Status The status of the DDNS s...

Chapter 3 Advanced Configuration 13 RangePlus Wireless Router Gateway This is the IP address of the gateway device that allows for contact between the Router and the remote network or host. Interface This interface tells you whether the Destination IP Address is on the LAN & Wireless (Ethernet a...

Chapter 3 Advanced Configuration 14 RangePlus Wireless Router for Wireless-N. If you are not sure which channel to select, keep the default, Auto . SSID Broadcast When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. T...

Chapter 3 Advanced Configuration 15 RangePlus Wireless Router WPA Personal NOTE: If you are using WPA, always remember that each device in your wireless network MUST use the same WPA method and shared key, or else the network will not function properly. Security Mode > WPA Personal Encryption WPA...

Chapter 3 Advanced Configuration 16 RangePlus Wireless Router type of algorithm, AES or AES or TKIP . The default is AES or TKIP . RADIUS Server Enter the IP address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default value is 1812 . Shared Secret Enter the key ...

Chapter 3 Advanced Configuration 17 RangePlus Wireless Router WEP WEP is a basic encryption method, which is not as secure as WPA/WPA2. Security Mode > WEP Encryption Select a level of WEP encryption, 40/64 bits (10 hex digits) or 104/128 bits (26 hex digits) . The default is 40/64 bits (10 hex d...

Chapter 3 Advanced Configuration 18 RangePlus Wireless Router Wireless Client List Wireless Client List This screen shows computers and other devices on the wireless network. The list can be sorted by Client Name, Interface, IP Address, MAC Address, and Status. Select Save to MAC Address Filter List...

Chapter 3 Advanced Configuration 19 RangePlus Wireless Router N and Wireless-G transmissions but will severely decrease performance. The default is Auto . Beacon Interval Enter a value between 20 and 999 milliseconds. The Beacon Interval value indicates the frequency interval of the beacon. A beacon...

Chapter 3 Advanced Configuration 20 RangePlus Wireless Router sites created using this programming language. Select this feature to enable Java filtering. Deselect the feature to allow Java usage. ActiveX ActiveX is a programming language for websites. If you deny ActiveX, you run the risk of not ha...

Chapter 3 Advanced Configuration 21 RangePlus Wireless Router Summary Status Policies are disabled by default. To enable a policy, select the policy number from the drop-down menu, and select Enabled . To create a policy, follow steps 1-11. Repeat these steps to create additional policies, one at a ...

Chapter 3 Advanced Configuration 22 RangePlus Wireless Router Applications and Gaming > Single Port Forwarding Single Port Forwarding Common applications are available for the first five entries. Select the appropriate application. Then enter the IP address of the server that should receive these...

Chapter 3 Advanced Configuration 23 RangePlus Wireless Router Enabled Select Enabled to enable port forwarding for the applications you have defined.Click Save Settings to apply your changes, or click Cancel Changes to cancel your changes. Applications & Gaming > Port Range Triggering The Por...

Chapter 3 Advanced Configuration 24 RangePlus Wireless Router much time is left for the current IP address). To remove a DHCP client, click Delete . To retrieve the most up-to- date information, click Refresh . To exit this screen and return to the DMZ screen, click Close . Click Save Settings to ap...

Chapter 3 Advanced Configuration 25 RangePlus Wireless Router Online Games QoS > Online Games Games Select the appropriate game. Priority Select the appropriate priority: High , Medium (Recommend) , Normal , or Low . Click Add to save your changes. Your new entry will appear in the Summary list. ...

Chapter 3 Advanced Configuration 26 RangePlus Wireless Router Management Router Access To ensure the Router’s security, you will be asked for your password when you access the Router’s web-based utility. The default is admin . Router Password Enter a new password for the Router. Re-enter to confirm ...

Chapter 3 Advanced Configuration 27 RangePlus Wireless Router Log Log To disable the Log function, keep the default setting, Disabled . To monitor traffic between the network and the Internet, select Enabled . With logging enabled, you can choose to view temporary logs. View Log To view the logs, cl...

Chapter 3 Advanced Configuration 28 RangePlus Wireless Router Start to Traceroute To run the test, click this button. The Traceroute Test screen will show if the test was successful. Click Close to return to the Diagnostics screen. Diagnostics > Traceroute Administration > Factory Defaults The...

Chapter 3 Advanced Configuration 29 RangePlus Wireless Router Status > Router The Router screen displays information about the Router and its current settings. Status > Router Router Information Firmware Version This is the version number of the Router’s current firmware. Current Time This sho...

Chapter 3 Advanced Configuration 30 RangePlus Wireless Router DHCP Client Table The DHCP Client Table lists computers and other devices that have been assigned IP addresses by the Router. The list can be sorted by Client Name, Interface, IP Address, MAC Address, and Expired Time (how much time is le...

Appendix A Troubleshooting 31 RangePlus Wireless Router Appendix A: Troubleshooting Your computer cannot connect to the Internet. Follow these instructions until your computer can connect to the Internet: Make sure that the Router is powered on. The Power • LED should be blue and not flashing.If the...

Appendix B Specifications 32 RangePlus Wireless Router Appendix B: Specifications Model WRT110 Standards IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u Ports Internet: One 10/100 RJ-45 Port Ethernet: Four 10/100 RJ-45 Ports One Power Port Buttons One Reset Button LEDs Power, Ethernet (1-4), Int...

Appendix C Warranty Information 33 RangePlus Wireless Router Appendix C: Warranty Information Limited Warranty Linksys warrants this Linksys hardware product against defects in materials and workmanship under normal use for the Warranty Period, which begins on the date of purchase by the original en...

Appendix C Warranty Information 34 RangePlus Wireless Router rejected. Do not include any other items with the product you are returning to Linksys. Defective product covered by this limited warranty will be repaired or replaced and returned to you without charge. Customers outside of the United Sta...

Appendix D Regulatory Information 35 RangePlus Wireless Router Appendix D: Regulatory Information FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accep...

Appendix D Regulatory Information 36 RangePlus Wireless Router Avis d’Industrie Canada Cet appareil est conforme aux normes NMB003 et RSS210 d’Industrie Canada.L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes : il ne doit pas produire de brouillage et 1. il doit accept...

Appendix D Regulatory Information 37 RangePlus Wireless Router User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Links...

41 Appendix E Software License Agreement RangePlus Wireless Router Appendix E: Software License Agreement Software in Linksys Products This product from Cisco-Linksys LLC or from one of its affiliates Cisco Systems-Linksys (Asia) Pte Ltd. or Cisco- Linksys K.K. (“Linksys”) contains software (includi...

42 Appendix E Software License Agreement RangePlus Wireless Router used in accordance with the terms of this Agreement; (iii) to provide improvements to the way Linksys delivers technology to you and to other Linksys customers; (iv) to enable Linksys to comply with the terms of any agreements it has...

45 Appendix E Software License Agreement RangePlus Wireless Router If, as a consequence of a court judgment or allegation 7. of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict t...

46 Appendix E Software License Agreement RangePlus Wireless Router This product includes software written by Tim Hudson ([email protected]).In addition, if this Linksys product contains open source software licensed under the OpenSSL license then the license terms below in this Schedule 3 will apply...