Cisco SPA122 - Manuals - manualsarea.com

Page 2 - Welcome; This product family includes the following models:; • SPA122 ATA with Router:; Before You Begin; An active Internet account and Voice over IP account; Product Features; Top Panel

2 Cisco SPA100 Series Analog Telephone Adapters Welcome Thank you for choosing a Cisco SPA100 Series Analog Telephone Adapter. This product family includes the following models: • SPA112 Two-Port Phone Adapter: 2 FXS ports and 1 10/100 WAN port. • SPA122 ATA with Router: 2 FXS ports, 1 10/100 WAN po...

Page 3 - Back Panel; —Transmitting or receiving data through; Feature

Cisco SPA100 Series Analog Telephone Adapters 3 Back Panel Feature Description Phone 1 Phone 2 Steady green —On hook. Slow flashing green —Off hook. Off —Port not ready. Internet Flashing green —Transmitting or receiving data through the WAN port. Off —No link. System Steady green —System ready, IP ...

Page 4 - Connecting the Equipment; Mounting the ATA, page 9; Internet; Power

4 Cisco SPA100 Series Analog Telephone Adapters Connecting the Equipment N OTE For wall-mounting instructions, see Mounting the ATA, page 9 . S TEP 1 Connect one end of the provided Ethernet cable to the Internet (Blue) port. Connect the other end directly to your broadband network deviceConnect one...

Page 5 - Configuration and Management of the ATA; Using the Web-Based Configuration Utility; Using the IVR for; and settings; Where to Go From Here, page 11

Cisco SPA100 Series Analog Telephone Adapters 5 Configuration and Management of the ATA You can use the web-based configuration utility to set up your ATA. You also can use the built-in Interactive Voice Response (IVR) system. Using the Web-Based Configuration Utility S TEP 1 Connect your computer t...

Page 6 - Using the IVR for Administration; IVR Actions

6 Cisco SPA100 Series Analog Telephone Adapters Using the IVR for Administration An IVR system is available to help you to configure and manage your ATA. You can use the telephone keypad to select options and to make your entries. To access the IVR menu: S TEP 1 Connect an analog phone to the Phone ...

Page 7 - IVR Action

Cisco SPA100 Series Analog Telephone Adapters 7 IVR Actions IVR Action Menu Option Choices and Instructions Enter IVR Menu **** Check Internet Connection Type 100 Set Internet Connection Type 101 DHCP: 0 Static IP: 1 PPPoE: Press 2 PPPoE, DHCP: Press 3 DHCP, PPPoE: Press 4 Check Internet IP Address ...

Page 9 - Mounting the ATA; Desktop Placement; Wall Mounting

Cisco SPA100 Series Analog Telephone Adapters 9 Mounting the ATA You can place the ATA on a desktop or mount it on a wall. C AUTION To prevent the ATA from overheating, do not operate it in an area that exceeds an ambient temperature of 104°F (40°C). Desktop Placement Place the ATA on a flat surface...

Page 10 - To mount the unit to the wall:

10 Cisco SPA100 Series Analog Telephone Adapters Recommended hardware (not included): Two number-six pan-head tapping screws, 5/8-in. length, with anchors for sheet rock installation. W ARNING Insecure mounting might damage the ATA or cause injury. Cisco is not responsible for damages incurred by in...

Page 11 - Where to Go From Here; Support; Phone Support Contacts; Product Documentation; Cisco Small Business

Cisco SPA100 Series Analog Telephone Adapters 11 Where to Go From Here Support Cisco Small Business Support Community www.cisco.com/go/smallbizsupport Cisco Small Business Support and Resources www.cisco.com/go/smallbizhelp Phone Support Contacts www.cisco.com/go/sbsc Cisco Small Business Firmware D...

Page 12 - Americas Headquarters

Americas Headquarters Cisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAwww.cisco.comSmall Business Support, Global: www.cisco.com/go/sbsc Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S.and other countries. A listing of Cisco's tradema...