Cisco SLM248P - Manuals - manualsarea.com

Page 2 - Welcome; Front Panel; Gigabit; (Amber) Lights up to indicate a functional 1000

Cisco Small Business SLM Series Smart Switch Installation Guide 1 Welcome Thank you for choosing the Cisco Small Business Series Smart Gigabit Switch. The Smart Switches offer the following interfaces: • The SLM2024 and SLM2048 offer twenty four (24) or forty eight (48) gigabit copper ports, with tw...

Page 3 - Switch Model

2 Cisco Small Business SLM Series Smart Switch Installation Guide To establish a Fast Ethernet connection using a miniGBIC port, you will need to install a MFEFX1 (100BASE-FX) or MFELX1 (100BASE-LX) 100SFP transceiver and use fiber optic cabling. N OTE On the SLM2024 and SLM2048, miniGBIC ports are ...

Page 4 - LEDs and Ports Common to all Switch Models; System

Cisco Small Business SLM Series Smart Switch Installation Guide 3 G1-G2 — The switch is equipped with two autosensing gigabit Ethernet network ports, which use RJ-45 connectors. The gigabit Ethernet ports support network speeds of 10 Mbps, 100 Mbps, or 1000 Mbps. They can operate in half- and full-d...

Page 5 - Back Panel; The power port is located on the back panel of the switch.; Installing the Switch; Tools for installing the hardware; Placement Tips; Do not stack free-standing switches more than four units high.

4 Cisco Small Business SLM Series Smart Switch Installation Guide in half- and full- duplex modes. Auto-sensing technology enables each port to automatically detect the speed of the device connected to it (10 Mbps or 100 Mbps), and adjust its speed and duplex mode accordingly. miniGBIC — (1-2) The m...

Page 6 - • Ambient Temperature; Desktop Placement

Cisco Small Business SLM Series Smart Switch Installation Guide 5 • Ambient Temperature — To prevent the switch from overheating, do not operate it in an area that exceeds an ambient temperature of 104°F (40°C). • Air Flow — Be sure that there is adequate air flow around the switch. • Mechanical Loa...

Page 7 - To get started configuring your switch, perform the following:; Connect a computer to an available LAN port.; Start a web browser.

6 Cisco Small Business SLM Series Smart Switch Installation Guide S TEP 5 Connect the switch to network devices according to the the installation instructions in section 4, “Connecting the Equipment”. Getting Started with the Configuration Before you begin to use the Configuration Utility, make sure...

Page 8 - admin; Verifying the Hardware Installation; Getting to Know the Switch,

Cisco Small Business SLM Series Smart Switch Installation Guide 7 N OTE If you have changed the switch IP address or are using DHCP to assign it, enter the new IP address assigned to the switch. The ip address of the computer you are using to configure the switch, must be on the same subnet as the s...

Page 9 - smallbizsupport; Where to Go From Here, page 9; Returning the Switch to the Factor y Default; Factory Default; Save Configuration; Nex t Steps; Cisco Small Business SLM; downloads

8 Cisco Small Business SLM Series Smart Switch Installation Guide If the above recommendations do not work, try the same steps by using a different computer. The switch might have some hardware problems if the second computer also fails to establish a link, please contact technical support for furth...

Page 10 - Where to Go From Here; Support; Product Documentation

Cisco Small Business SLM Series Smart Switch Installation Guide 9 Where to Go From Here Support Cisco Small Business Support Community www.cisco.com/go/smallbizsupport Online Technical Support and Documentation (Login Required) www.cisco.com/support Phone Support Contacts www.cisco.com/en/US/support...

Page 12 - Americas Headquarters

Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Cisco, Cisco Systems, the Cisco logo, and the Cisco Systems logo are registered trademarksor trademarks of Cisco Systems, Inc. and/...