Cisco SG30028 - Manuals - manualsarea.com

Page 2 - 00 Series Managed Switches; Welcome; Cisco Small Business 300; Package Contents; Mounting the Cisco Switch; High Ambient Temperature

2 300 Series Managed Switches Welcome Thank you for choosing the Cisco Small Business 300 Series Managed Switch, a Cisco Small Business network communications device. This device is designed to be operational right out of the box as a standard bridge. In the default configuration, it will forward pa...

Page 3 - Reduced Air Flow

300 Series Managed Switches 3 N OTE Some switches have a higher temperature rating. The SG300- 10SFP, SG300-52P and SG300-52MP are rated at 113 degrees Fahrenheit (45 degrees Centigrade), and the SG300-28MP, and SF300-24MP are rated at 122 degrees Fahrenheit (50 degrees Centigrade). Reduced Air Flow...

Page 4 - Wall Mounting; The switch should be mounted so that the por ts face up or down.

4 300 Series Managed Switches C AUTION For stability, load the rack from the bottom to the top, with the heaviest devices on the bottom. A top-heav y rack is likely to be unstable and may tip over. Wall Mounting Only the 8-port models of the switch can be wall-mounted. N OTE The switch should be mou...

Page 5 - Connecting Network Devices; Ethernet port light turns green when the connection; Features of the Cisco Small Business 300 Series

300 Series Managed Switches 5 Connecting Network Devices To connect the switch to the network: S TEP 1 Connect the Ethernet cable to the Ethernet port of a computer, printer, network storage, or other network device. S TEP 2 Connect the other end of the network Ethernet cable to one of the numbered ...

Page 6 - The switch can deliver a maximum of 15.4 Watts to any 10/100 or; 00 Series Switches with Power Over Ethernet

6 300 Series Managed Switches Power over Ethernet (PoE) Considerations If your switch is one of the PoE models, consider the following table for specific information: N OTE The switch can deliver a maximum of 15.4 Watts to any 10/100 or Gigabit PoE por t . The 24MP, 28MP, 52P and 52MP models of the ...

Page 8 - Before You Begin; Accessing and Managing Your Switch; Use the Web-Based Interface

8 300 Series Managed Switches Configuring the Cisco Small Business Managed Switch Before You Begin Verify the managing computer requirements in the product release notes. The switch can be accessed and managed by two different methods; over your IP network using the web-based interface, or by the Co...

Page 9 - Switch Login Page; Change Password Page; Getting Started; Cisco 300 Series Managed Switch Administration; Use the console port

300 Series Managed Switches 9 N OTE Details on how to change the IP address on your computer depend upon the type of architecture and operating system you are using. Use the computer Help and Support functionality to search for “IP Addressing.” S TEP 3 Open a Web browser window. If you are prompted ...

Page 10 - Cisco Small; Static

10 300 Series Managed Switches • 8 data bits • no parity • 1 stop bit • no flow control S TEP 4 Enter a user name and password. User names and passwords are both case sensitive and alpha-numeric. The default username is cisco, and the default password is cisco. S TEP 5 If this is the first time that...

Page 11 - Troubleshoot Your Connection; managed; Possible Causes and Resolutions; Bad Ethernet connection:

300 Series Managed Switches 11 Troubleshoot Your Connection If you cannot access your switch from the web-based interface, the switch may not be reachable from your computer. You can test network connections by using ping on a computer running Windows: S TEP 1 Open a command window by using Start &g...

Page 12 - Unusually long access time:; Front Panel Ports; The ports and LEDs are located on the front panel of the switch.

12 300 Series Managed Switches Unusually long access time: Due to the standard spanning tree loop detection logic, adding new connections may take 30 to 60 seconds for the affected interfaces and/or LAN to become operational. Features of the Cisco Small Business 300 Series Managed Switch This sectio...

Page 13 - SG300-10SFP ports 1—8 are dedicated SFP ports. Their LED; Front Panel LEDs; System; LED; Reset Button; “Returning the Device to the Factory Default Settings”; for

300 Series Managed Switches 13 disabled. Combo ports are indicated by the presence of a bar on the panel that connects them, as shown in the following example: • The LEDs of the corresponding RJ-45 port light to respond to the SFP interface traffic. N OTE SG300-10SFP ports 1—8 are dedicated SFP port...

Page 14 - Back Panel; Reset

14 300 Series Managed Switches Back Panel The power port and console port are located on the back panel of the managed switch. Power—The Power port is where you will connect the switch to power. Depending on the model of switch you are using, this may be a power cord or a power adaptor. Console—The ...

Page 15 - Where to Go From Here; Support; Product Documentation; Cisco Small Business; Cisco Small Business Home

300 Series Managed Switches 15 Where to Go From Here Support Cisco Small Business Support Community www.cisco.com/go/smallbizsupport Cisco Small Business Support and Resources www.cisco.com/go/smallbizhelp Cisco Small Business Support Center (SBSC) Contacts www.cisco.com/go/sbsc Cisco Small Business...

Page 16 - Americas Headquarters; 70 West Tasman Drive

Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA www.cisco.com Small Business Support US: 1-866-606-1866 Small Business Support Global Contact Numbers Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliatesin the U.S....