Cisco S/390 - Manuals - manualsarea.com

Page 2 - Enhanced Features; Improved Performance and Efficiency; Activate, inactivate, define, and remove virtual IP addresses; Enhanced Functionality

2 Cisco IOS for S/390 Release 2.0 Release Notes Enhanced Features Enhanced Features This section describes the new product features of Cisco IOS for S/390 release 2.0. Improved Performance and Efficiency • Increased throughput, reduction in CPU utilization, and inbound and outbound multiprocessing. ...

Page 3 - Enhanced APIs; Product Changes; The message; no longer displays to indicate that; Table 1

Cisco IOS for S/390 Release 2.0 Release Notes 3 Enhanced APIs Enhanced APIs • OS/390 OpenEdition (UNIX System Services) asynchronous I/O (required for DB2 V5 TCP/IP support) and SRB mode. • Multiple BIND support for server applications (parallel processing for FTP, Telnet, and vendor applications). ...

Page 7 - New Features

Cisco IOS for S/390 Release 2.0 Release Notes 7 New Features — xxx is a number in the range of 000 - 999, uniquely identifying the message — s is a letter indicating the severity level of the message: • Results of using the TPOIPBRO option (query IP broadcast value) when issuing a TOPTION OPTCD=QUER...

Page 8 - Cisco Connection Online; You can access CCO in the following ways:; Documentation

8 Cisco IOS for S/390 Release 2.0 Release Notes Cisco Connection Online Cisco Connection Online Cisco Connection Online (CCO) is Cisco Systems’ primary, real-time support channel. Maintenance customers and partners can self-register on CCO to obtain additional information and services. Available 24 ...

Page 9 - The Product Documentation Library; This document ships prior to shipment of the product.

Cisco IOS for S/390 Release 2.0 Release Notes 9 The Product Documentation Library The Product Documentation Library The Cisco IOS for S/390 manual set has been reorganized along functional lines. The complete manual set includes these documents: • Cisco IOS for S/390 Planning Guide Describes the Cis...

Page 10 - Changes to the Documentation Set; Cisco IOS for S/390 Planning Guide; SERVICE Star tup Statement

10 Cisco IOS for S/390 Release 2.0 Release Notes Documentation Changes to the Documentation Set The Cisco IOS for S/390 Planning and Operations Guide and Cisco IOS for S/390 Installation Guide of previous releases have been reorganized as described below: • Cisco IOS for S/390 Planning Guide This gu...

Page 11 - The parameter lists for all exit points must be updated.

Cisco IOS for S/390 Release 2.0 Release Notes 11 Cisco IOS for S/390 Planning Guide Exit Work Area If requested, the exit facility provides a work area to the exit program upon each invocation, except the INIT exit point. Request the work area with the EWALENGTH parameter of the EXIT statement in me...

Page 13 - Cisco IOS for S/390 System Management Guide; Refreshing USSTAB; USSTAB tables can be refreshed with the REFRESH command.; The correct syntax is:

Cisco IOS for S/390 Release 2.0 Release Notes 13 Cisco IOS for S/390 System Management Guide Customizing CA-ACF2 Version 6 or Later A correction is required for Chapter 3 of the Cisco IOS for S/290 Planning Guide. Under the heading Customizing CA-ACF2 Version 6 or Later (page 3-12), step 2 is Update...

Page 15 - To terminate the RTM command, press Enter.; Capture of User Data in a TLI Trace; Cisco IOS for S/390 Customization Guide; TCPEEP NETIF Option

Cisco IOS for S/390 Release 2.0 Release Notes 15 Cisco IOS for S/390 Customization Guide NETSTAT RTM Command The NETSTAT diagnostic commands are described beginning on page 5-12. The NETSTAT RTM command can be used by a Telnet user to display a continuous activity report on all active hardware inter...

Page 18 - LOGGING SPIN NOW; Spins the log now leaves all specifications unchanged.; Cisco IOS for S/390 Prefixed Messages; There was a negative response to a; You will need to research what happened to the USS Table.

18 Cisco IOS for S/390 Release 2.0 Release Notes Documentation LOGGING SPIN NOW Spins the log now; leaves all specifications unchanged. LOGGING SPIN(LINES(5000) MINUTES(60)) Resets spin to every 5000 lines or 60 minutes, whichever comes first; leaves remaining keywords unchanged. LOGGING PRINT(ALL) ...

Page 19 - Cisco IOS for S/390 Release 2.0 Release Notes 19; Check the spelling of tbl_name and APP task task_num that may have; Cisco IOS for S/390 Unprefixed Messages and Codes

Cisco IOS for S/390 Release 2.0 Release Notes 19 Cisco IOS for S/390 Unprefixed Messages and Codes T01CF084W Refresh of USSTAB failed, tbl_name not used in APP task task_num Explanation There was a negative response to REFRESH USSTAB(tbl_name) TASK(task_num) operator command. tbl_name for APP task t...

Page 21 - Cisco IOS for S/390 Release 2.0 Release Notes 21

Cisco IOS for S/390 Release 2.0 Release Notes 21 Cisco IOS for S/390 Unprefixed Messages and Codes C25Bxxxx (1Dxx) T012TERR The following table replaces Table 82 “X’C25B’ Instance Codes” in the “API Diagnostic Codes” chapter: Table 8 X’C25B’ Instance Codes C24C0020 0E20 SAW not obtained C24C0021 0E2...

Page 23 - Installing Cisco IOS for S/390 Release 2.0; Installation Requirements; MVS Releases; no longer displays to indicate that startup; Unable to find a route because SO_DONTROUTE was set.

Cisco IOS for S/390 Release 2.0 Release Notes 23 Installing Cisco IOS for S/390 Release 2.0 Table 10 X'C262'Instance Codes C909xxx T01SISND The following 4-byte code has been added to Table 116, “X’C909’ Instance Codes,” in the “API Diagnostic Codes” chapter: Table 11 X’C909’ Instance Codes Installi...

Page 24 - Callable System Services Library

24 Cisco IOS for S/390 Release 2.0 Release Notes Installing Cisco IOS for S/390 Release 2.0 Media media_name is now operational with one or more active interfaces. Callable System Services Library You must have the Callable System Services library, SYS1.CSSLIB, available for the installation. Module...

Page 26 - IP Hardware, Cisco IOS Software, and CIP Microcode Compatibility; Installation Process; Control File JCL

26 Cisco IOS for S/390 Release 2.0 Release Notes Installing Cisco IOS for S/390 Release 2.0 IP Hardware, Cisco IOS Software, and CIP Microcode Compatibility The following table lists the compatibility requirements for Cisco IOS for S/390. However, we recommend that you refer to the CCO service and y...

Page 27 - — ALLOCSMP requires 53 cylinders.

Cisco IOS for S/390 Release 2.0 Release Notes 27 Installation Process Note Some members of the CNTL library are now under SMP/E control and some members will be loaded as part of the APPLY process. When modifying the ALLOCT00 JCL stream, verify that the TCPJCL DDDEF points to your CNTL library. Also...

Page 29 - ascii

Cisco IOS for S/390 Release 2.0 Release Notes 29 Installation Process Note Exit the CNTL library as soon as the INSTSMPE job stream is submitted. Keeping the data set open in your TSO session will cause the APPLY job to fail. 6 HOLDDATA Before installing system maintenance, obtain the most recent HO...

Page 31 - Processing continues after the message displays.

Cisco IOS for S/390 Release 2.0 Release Notes 31 Installation Process PARM Customization The statements described in this section are all described in the Cisco IOS for S/390 Customization Guide. That document is the definitive source of information for these members. These members are all shipped w...

Page 33 - — If you are using JES2 add:; Diagnosis and Problem Reporting; Obtaining GTF Output

Cisco IOS for S/390 Release 2.0 Release Notes 33 Diagnosis and Problem Reporting — If you are using JES2 add: /*JOBPARM LINES=9999 — If you are using JES3, add: //*MAIN LINES=(999,W) • To prepare RUNTCP as a batch job: — Complete your RUNTCP JOBCARD and add the following JCL statements to the end of...

Page 34 - 4 Cisco IOS for S/390 Release 2.0 Release Notes; F RUNTCP,TCP SNAP ALL; Obtaining a TCPEEP; Mixing runtime modules between releases will cause problems.

34 Cisco IOS for S/390 Release 2.0 Release Notes SAS/C Usage Notes F RUNTCP,TCP SNAP ALL Obtaining a TCPEEP Read the Cisco IOS for S/390 System Management for information to help you set up and submit your trace address space and submit the TCPEEP TSO command. Obtaining an SVC Dump Read the IBM docu...

Page 35 - ACPCFG00 HOST Statement

Cisco IOS for S/390 Release 2.0 Release Notes 35 ACPCFG00 HOST Statement For complete information on the Cisco IOS for S/390 product, please refer to your documentation set. This section contains the following topics: • ACPCFG00 HOST Statement • Application Statement Mappings • TCP Protocol Paramete...

Page 36 - GLOBAL; IFSPARM; SECURITY; TCP

36 Cisco IOS for S/390 Release 2.0 Release Notes Converting from Cisco IOS for S/390 Release 1.0 to Cisco IOS for S/390 Release 2.0 Figure 1 HOST parameters SSN(subsys)DNR(subsys)ACBNAME(acbname)GREETING(YES|NO|APPL)JES(2|3|[ssn] [luname] [c] )LOGSTAMP | NOLOGSTAMPLOOPBUF(number)LUPARM(ACPLUP00)MIGV...

Page 37 - Application Statement Mappings; Figure 2; TCP Protocol Parameters; TERMPROF

Cisco IOS for S/390 Release 2.0 Release Notes 37 Application Statement Mappings Application Statement Mappings The application statements in the former ACPCFG00 file can be mapped to the same statements in the APPCFG00 member, although the SMF statement has been moved to IJTCFG00. These release 1.0 ...

Page 39 - UDP Protocol Parameters; The ACPCFG00 TIB and UDP mappings have been moved to TPPCFG00.; RAW Protocol Parameters; TIB

Cisco IOS for S/390 Release 2.0 Release Notes 39 UDP Protocol Parameters UDP Protocol Parameters The ACPCFG00 TIB and UDP mappings have been moved to TPPCFG00. Parameters removed from release 1.0: • PROTOCOL(UDP) • UDP IDLE, RABLIM, WRELIM Parameters renamed for release 1.0: • TADDRASSIGN -> PORT...

Page 40 - NETWORK Parameters

40 Cisco IOS for S/390 Release 2.0 Release Notes Converting from Cisco IOS for S/390 Release 1.0 to Cisco IOS for S/390 Release 2.0 New parameters for release 2.0. • (None) Figure 5 RAW Protocol Parameters NETWORK Parameters NETWORK parameters have been moved to TCPCFG00 NETWORK and MEDIA statements...

Page 41 - ROUTE Parameters; NET

Cisco IOS for S/390 Release 2.0 Release Notes 41 ROUTE Parameters Figure 6 NETWORK Parameters ROUTE Parameters The following diagram shows the routing statements from Cisco IOS for S/390 release 1.0 and their usage in Cisco IOS for S/390 release 2.0. Most important to notice is that the old ROUTE NE...

Page 42 - Driver Configuration; CETI Driver; ARPTABLE

42 Cisco IOS for S/390 Release 2.0 Release Notes Converting from Cisco IOS for S/390 Release 1.0 to Cisco IOS for S/390 Release 2.0 Figure 7 ROUTE Parameters Driver Configuration Driver configuration has been moved to TCPCFG00. CETI Driver CETI driver commands have been moved to TCPCFG00. Parameters...

Page 44 - CLAW

44 Cisco IOS for S/390 Release 2.0 Release Notes Converting from Cisco IOS for S/390 Release 1.0 to Cisco IOS for S/390 Release 2.0 Figure 9 CLAW Driver Parameters LNICDLC ACPCFG00 LNICDLC parameters have been moved to the TCPCFG00 CDLC statement. Parameters removed from release 1.0: • TRACE • NAME ...

Page 45 - CDLC

Cisco IOS for S/390 Release 2.0 Release Notes 45 Driver Configuration Figure 10 CDLC Driver Parameters LNIHYPR ACPCFG00 LNIHYPR parameters have been moved to the TCPCFG00 HYPER statement. Parameters removed from release 1.0: • TRACE • NAME • ERROR Parameters changed: • LNIHYPR -> HYPR • RETRY has...

Page 47 - IJTCFG00 Changes; LNILCS; LCS; LNILINK; LOCALADDR|NOLOCALADDR; LINK

Cisco IOS for S/390 Release 2.0 Release Notes 47 IJTCFG00 Changes Figure 12 LCS and LINK Parameters IJTCFG00 Changes There have been minimal changes to the IJTCFG00 IFSPARM and AUTH statements. The LOGGING statement haas been added to IJTCFG00. Parameters removed from release 1.0: • (none) Parameter...

Page 48 - LOGGING Statement; LOGGING; DATASPACESIZE; AUTH

48 Cisco IOS for S/390 Release 2.0 Release Notes Converting from Cisco IOS for S/390 Release 1.0 to Cisco IOS for S/390 Release 2.0 Figure 13 IFSPARM and AUTH Statements LOGGING Statement One of the design goals of Cisco IOS for S/390 release 2.0 was to reduce the volume of message output printed. S...

Page 50 - 0 Cisco IOS for S/390 Release 2.0 Release Notes

50 Cisco IOS for S/390 Release 2.0 Release Notes Converting from Cisco IOS for S/390 Release 1.0 to Cisco IOS for S/390 Release 2.0 This document is to be used in conjunction with the Cisco IOS for S/390 publications. AccessPath, AtmDirector, the CCIE logo, CD-PAC, Centri, the Cisco Capital logo, Ci...