Page 2 - Refresh
22-2 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A507 View OC-N PM Parameters Figure 22-1 Viewing OC-N Card Performance Monitoring Information Step 3 In the Port drop-down list, click the port you want to monitor. Step 4 Click Refresh . Step 5 View the PM pa...
Page 4 - DLP-A510 Provision a DS-3 Circuit Source and Destination
22-4 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A510 Provision a DS-3 Circuit Source and Destination DLP-A510 Provision a DS-3 Circuit Source and Destination Note After you have selected the circuit properties in the Circuit Source dialog box according to t...
Page 5 - DLP-A512 Change Node Access and PM Clearing Privilege
22-5 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A512 Change Node Access and PM Clearing Privilege DLP-A512 Change Node Access and PM Clearing Privilege Step 1 In node view, click the Provisioning > Security > Access tabs. Step 2 In the Access area, pr...
Page 7 - Apply
22-7 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A513 Provision CE-100T-8 Ethernet Ports • Enable Flow Control—Click this check box to enable flow control on the port (default). If you do not want to enable flow control, uncheck the box. The CE-100T-8 attemp...
Page 9 - DLP-A517 View Alarm or Event History
22-9 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A517 View Alarm or Event History DLP-A517 View Alarm or Event History Step 1 Decide whether you want to view the alarm message history at the node, network, or card level. Step 2 To view node alarm history: a....
Page 10 - DLP-A518 Create a New or Cloned Alarm Severity Profile
22-10 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A518 Create a New or Cloned Alarm Severity Profile c. Click the History > Session tab to view the alarm messages raised during the current session. d. Click the History > Card tab to retrieve all availa...
Page 12 - Clone; OK; Store
22-12 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A518 Create a New or Cloned Alarm Severity Profile Step 9 Click Clone in the shortcut menu. Tip To see the full list of profiles, including those available for loading or cloning, click Available. You must lo...
Page 14 - DLP-A519 Apply Alarm Profiles to Ports; Provisioning > Alarm Profiles > Alarm Behavior; Security Level
22-14 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A519 Apply Alarm Profiles to Ports DLP-A519 Apply Alarm Profiles to Ports Step 1 In the node view, double-click a card to open the card view. Note You can also apply alarm profiles to cards using the “DLP-A11...
Page 15 - DLP-A520 Delete Alarm Severity Profiles
22-15 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A520 Delete Alarm Severity Profiles Go to Step 3 to apply profiles to a port. Go to Step 4 to apply profiles to all ports on a card. Step 3 To apply profiles on a port basis: a. In card view, click the port r...
Page 16 - Yes; Remove
22-16 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A520 Delete Alarm Severity Profiles Figure 22-5 Select Node/Profile Combination For Delete Dialog Box Note You cannot delete the Inherited or Default alarm profiles. Note A previously created alarm profile ca...
Page 19 - DLP-A522 Suppress Alarm Reporting
22-19 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A522 Suppress Alarm Reporting DLP-A522 Suppress Alarm Reporting Caution If multiple CTC/TL1 sessions are open, suppressing alarms in one session suppresses the alarms in all other open sessions. Note Alarm su...
Page 20 - DLP-A523 Discontinue Alarm Suppression
22-20 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A523 Discontinue Alarm Suppression Step 7 Click Apply . Alarms that apply directly to this port will change appearance as described in Step 2 . (However, alarms raised on the entire card will remain raised.) ...
Page 21 - DLP-A524 Download an Alarm Severity Profile
22-21 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A524 Download an Alarm Severity Profile Suppressed alarms will reappear in the Alarms window. (They might have previously been cleared from the window using the Synchronize button.) The AS-CMD alarm with the ...
Page 22 - DLP-A526 Change Line and Threshold Settings for the DS3i-N-12 Cards
22-22 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A526 Change Line and Threshold Settings for the DS3i-N-12 Cards Step 8 Right-click anywhere in the downloaded profile column to view the profile editing shortcut menu. Step 9 Click Store . Step 10 In the Stor...
Page 23 - Parameter
22-23 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A526 Change Line and Threshold Settings for the DS3i-N-12 Cards For definitions of the line settings, see Table 22-1 . For definitions of the line threshold settings, see Table 22-2 on page 22-25 . For defini...
Page 26 - DLP-A527 Change the OC-N Card ALS Maintenance Settings
22-26 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A527 Change the OC-N Card ALS Maintenance Settings Note The threshold value appears after the circuit is created. Step 7 Return to your originating procedure (NTP). DLP-A527 Change the OC-N Card ALS Maintenan...
Page 28 - DLP-A528 Change the Default Network View Background Map; DLP-A529 Delete Ethernet RMON Alarm Thresholds
22-28 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A528 Change the Default Network View Background Map DLP-A528 Change the Default Network View Background Map Note If you modify the background image, the change is stored in your CTC user profile on the comput...
Page 30 - DLP-A531 Print CTC Data; Alarms
22-30 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A531 Print CTC Data Figure 22-8 Tie-Down Bar Step 2 Install the four screws into the rack. Step 3 Return to your originating procedure (NTP). DLP-A531 Print CTC Data Step 1 Click the tab (and subtab, if prese...
Page 32 - DLP-A532 Export CTC Data
22-32 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A532 Export CTC Data Step 6 Repeat this task for each window that you want to print. Step 7 Return to your originating procedure (NTP). DLP-A532 Export CTC Data Step 1 Click the tab containing the information...
Page 34 - DLP-A533 Create Ethernet RMON Alarm Thresholds
22-34 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A533 Create Ethernet RMON Alarm Thresholds DLP-A533 Create Ethernet RMON Alarm Thresholds Note The ONS 15454 ML-Series cards use the Cisco IOS CLI to manage RMON. Step 1 Complete the DLP-A60 Log into CTC, pag...
Page 35 - Variable
22-35 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A533 Create Ethernet RMON Alarm Thresholds Table 22-6 Ethernet Threshold Variables (MIBs) Variable Definition iflnOctets Total number of octets received on the interface, including framing octets iflnUcastPkt...
Page 39 - Relative
22-39 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A533 Create Ethernet RMON Alarm Thresholds Step 7 From the Alarm Type drop-down list, indicate whether the event will be triggered by the rising threshold, falling threshold, or both the rising and falling th...
Page 40 - DLP-A534 Provision OSI Routing Mode; Provisioning; Purpose
22-40 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A534 Provision OSI Routing Mode DLP-A534 Provision OSI Routing Mode Caution Do not complete this task until you confirm the role of the node within the network. It will be either an ES, IS Level 1, or IS Leve...
Page 41 - DLP-A535 Provision or Modify TARP Operating Parameters
22-41 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A535 Provision or Modify TARP Operating Parameters • Intermediate System Level 1/Level 2—The ONS 15454 performs IS functions. It communicates with IS and ES nodes that reside within its OSI area. It also comm...
Page 43 - DLP-A536 Add a Static TID to NSAP Entry to the TARP Data Cache
22-43 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A536 Add a Static TID to NSAP Entry to the TARP Data Cache • T2—Sets the amount of time to wait for a response to a Type 2 PDU. TARP Type 2 PDUs seek a specific NE TID value within OSI Level 1 and Level 2 are...
Page 44 - DLP-A537 Remove a Static TID to NSAP Entry from the TARP Data Cache
22-44 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A537 Remove a Static TID to NSAP Entry from the TARP Data Cache DLP-A537 Remove a Static TID to NSAP Entry from the TARP Data Cache Step 1 In node view, click the Provisioning > OSI > TARP > Static T...
Page 45 - DLP-A539 Provision OSI Routers
22-45 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A539 Provision OSI Routers Step 4 Click OK to close the Masked NSAP Entry dialog box, if used, and then click OK to close the Add Static Entry dialog box. Step 5 Return to your originating procedure (NTP). DL...
Page 46 - DLP-A540 Provision Additional Manual Area Addresses
22-46 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A540 Provision Additional Manual Area Addresses DLP-A540 Provision Additional Manual Area Addresses Step 1 In node view, click the Provisioning > OSI > Routers > Setup tabs. Step 2 Chose the router w...
Page 47 - Enable LAN Subnet
22-47 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A541 Enable the OSI Subnet on the LAN Interface Note The OSI subnetwork point of attachment cannot be enabled for the LAN interface if the OSI routing mode is set to ES (end system). Note If Secure Mode is on...
Page 48 - Create
22-48 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A542 Create an IP-Over-CLNS Tunnel DLP-A542 Create an IP-Over-CLNS Tunnel Caution IP-over-CLNS tunnels require two end points. You will create one point on an ONS 15454. The other end point is generally provi...
Page 49 - DLP-A543 Remove a TARP Manual Adjacency Table Entry; DLP-A544 Change the OSI Routing Mode
22-49 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A543 Remove a TARP Manual Adjacency Table Entry Step 5 Provision the other tunnel end point using the documentation. Step 6 Return to your originating procedure (NTP). DLP-A543 Remove a TARP Manual Adjacency ...
Page 51 - DLP-A545 Edit the OSI Router Configuration; DLP-A546 Edit the OSI Subnetwork Point of Attachment
22-51 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A545 Edit the OSI Router Configuration DLP-A545 Edit the OSI Router Configuration Step 1 In node view, click the Provisioning > OSI > Routers > Setup tabs. Step 2 Chose the router you want provision ...
Page 54 - DLP-A549 View IS-IS Routing Information Base
22-54 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A549 View IS-IS Routing Information Base DLP-A549 View IS-IS Routing Information Base Step 1 In the node view, click the Maintenance > OSI > IS-IS RIB tabs. Step 2 View the following RIB information for...
Page 55 - DLP-A550 View ES-IS Routing Information Base
22-55 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A550 View ES-IS Routing Information Base DLP-A550 View ES-IS Routing Information Base Step 1 In node view, click the Maintenance > OSI > ES-IS RIB tabs. Step 2 View the following RIB information for Rou...
Page 56 - DLP-A552 Adjust the Java Virtual Memory Heap Size
22-56 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A552 Adjust the Java Virtual Memory Heap Size Step 2 View the following TARP data cache information: • TID—The target identifier of the originating NE. For ONS 15454s, the TID is the name entered in the Node ...
Page 65 - Clear
22-65 Cisco ONS 15454 Procedure Guide, R7.0 November 2007 Chapter 22 DLPs A500 to A599 DLP- A554 Upgrade EC-1 Cards in a 1:1 Configuration to DS3/EC1-48 Cards Step 12 Change the low-density card to the high-density card in CTC: a. Right-click Slot 1/Slot 17 and choose Change Card from the drop-down ...
Cisco MGX-FRSM-HS2
Manual
Cisco 3545
Manual
Cisco Dial NMS
Manual
Cisco DOC-7813565=
Manual
Cisco 2620
Manual
Cisco CP7910GRF
Manual
Cisco ME-C6524GS-8S
Manual
Cisco OL-2056-02
Manual
Cisco TD 92322GB
Manual
Cisco OL-11524-01
Manual
Cisco OL-5532-02
Manual
Cisco VG204XM
Manual
Cisco DS71-MD4
Manual
Cisco 247933900
Manual
Cisco 4.5
Manual