Cisco OL-12397-13 - Manuals

Cisco OL-12397-13 – Manual in PDF format online.

Manuals:

Manual

Manual Cisco OL-12397-13

Summary

Page 2 - SIP Phone Initialization; Provisioning a SIP Subscriber; SIP Registration and Security; IP

2-2 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Phone Initialization SIP Phone Initialization Figure 2-1 shows an example of SIP phone initialization on bootup, that is, how a typical phone might initialize itself and establish...

Page 3 - Enhanced SIP Registration; Description

2-3 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security When a SIP user attempts to register or set up a call, the BTS 10200 challenges the SIP subscriber based on provisioning in the Serving Domain Name table...

Page 4 - Provisioning Commands

2-4 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security To enable or disable SECURE_FQDN on a successful registered subscriber 1. Take AOR out of service to remove all registered contact. 2. Enable or disable ...

Page 5 - Provision a New SIP Subscriber; Enable or Disable Secure FQDN for an Existing Subscriber

2-5 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security • The SECURE_FQDN in the AOR2SUB table is stored both in the ORACLE database and the shared memory. AOR2SUB records cannot be added or deleted directly. ...

Page 6 - Operations; No Calls to or from an Unregistered Secure-Provision SIP Endpoint; Registration Expires

2-6 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security change aor2sub [email protected]; status=ins; Step 4 Reboot the adapter device (such as ATA) for this subscriber. Opera...

Page 7 - Call Processing

2-7 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security Call Processing The SIP application in the BTS 10200 implements the secure provisioning feature for all incoming SIP messages (requests and responses) fr...

Page 8 - Rules for Sending a SIP INVITE Message from the BTS 10200; Validation of ACK Request; Measurements; Events and Alarms

2-8 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Registration and Security 2. When a Contact header is present on a reliable 1xx or 2xx response, the Contact FQDN/IP address of the response is verified to resolve to the Secure-I...

Page 9 - SIP User Authentication

2-9 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP User Authentication SIP User Authentication The BTS 10200 can act as an authentication server. Authentication is enabled on the serving domain through provisioning. Whenever a SIP...

Page 10 - SIP Subscriber Calls

2-10 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers SIP Subscriber Calls Figure 2-2 shows how an incoming request is processed, and indicates the role of the Authentication Service in the BTS 10200. Figure 2-2 Authentication and Proce...

Page 11 - Provisioning Session Timers for SIP Subscribers; SIP Timer Values for SIP Subscribers

2-11 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Provisioning Session Timers for SIP Subscribers Provisioning Session Timers for SIP Subscribers The system uses session timers to periodically refresh SIP sessions during call proces...

Page 12 - Diversion Indication for SIP Subscribers

2-12 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Diversion Indication for SIP Subscribers Step 2 If not already done, add a default sip-timer-profile-id to the ca-config table: add ca-config type=sip_timer_profile_id; datatype=stri...

Page 13 - Comparison of SIP-Based Features and MGCP-Based Features

2-13 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Comparison of SIP-Based Features and MGCP-Based Features Comparison of SIP-Based Features and MGCP-Based Features Table 2-1 lists the MGCP features available (in the Feature column) ...

Page 18 - Cisco BTS 10200 Softswitch-Based Features; Summary

2-18 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Cisco BTS 10200 Softswitch-Based Features Softswitch-based features are directly provided by the BTS 10200. SIP phones can provide some feat...

Page 19 - Call Forwarding; Call Forwarding Activation and Deactivation

2-19 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Call Forwarding The differences between the feature for SIP and the feature for MGCP are as follows: • There is no tone provided for SIP use...

Page 20 - Call Forwarding to an E.164 Number or an Extension Number; Calling Name and Number Delivery; CND; CNAM

2-20 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Note Forwarding to a URL address of record (AOR) is not supported. SIP subscribers do not hear a final dial tone upon completing activation ...

Page 21 - Caller ID Delivery Suppression; Direct Inward Dialing

2-21 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features • If the calling number and name are available and the presentation indication of either calling number or calling name is restricted , the ...

Page 22 - Direct Outward Dialing; Do Not Disturb

2-22 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Direct Outward Dialing With the Direct Outward Dialing (DOD) service, a station user can place external calls to the exchange network withou...

Page 23 - Vertical Service Code Features

2-23 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features E.164 and Centrex Dialing Plan (Extension Dialing) The system supports E.164 and Centrex Dialing Plan (extension dialing) addressing from SI...

Page 24 - Planning VSCs In Networks with SIP Subscribers.

2-24 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Planning VSCs In Networks with SIP Subscribers. Some features require SIP subscriber to enter a series of numbers and characters on the SIP ...

Page 25 - Voice Mail; VM Actions; VM Deposit

2-25 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features • Call forwarding on no answer variable activation (CFNAVA), call forwarding on no answer variable deactivation (CFNAVD), call forwarding on...

Page 26 - Retrieving VM; VM Implementation for Centrex Subscribers

2-26 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Whenever a change in VM status occurs for a subscriber (for example, when a VM message is deposited for the subscriber, or when all such mes...

Page 27 - VM Within a Single Centrex Group

2-27 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Note For general VM provisioning details, see “Provisioning Voice Mail” in the Cisco BTS 10200 Softswitch Provisioning Guide . VM Within a S...

Page 28 - Provisioning Voice Mail Across Multiple Centrex Groups

2-28 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Cisco BTS 10200 Softswitch-Based Features Step 8 If your VM server does not support FQDN hostnames, you must provision a serving-domain-name record in the BTS 10200 using the IP addr...

Page 29 - Jointly Provided Features

2-29 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features The following provisioning steps illustrate how to provide VM service for BTS 10200 Centrex subscribers across multiple Centrex groups. Step 1 Add a SIP tru...

Page 30 - Supported Handsets; SIP Handset

2-30 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features Provisioning in this context refers to feature activation or deactivation, and setting any applicable directory numbers (DNs) associated with the feature. I...

Page 31 - SIP Software Clients

2-31 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Jointly Provided Features Number: Call-Fwd Unconditional Activate/Deactivate Feature Set/Change Forwarding Number Number: Call-Fwd No Answer Activate/Deactivate Feature Set/Change Fo...

Page 32 - Distinctive Ringing

2-32 Cisco BTS 10200 Softswitch SIP Feature and Provisioning Guide, Release 5.0 OL-12397-13 Chapter 2 SIP Subscribers Phone-Based Features Distinctive Ringing Distinctive ringing uses a special ringing pattern to alert the called user of incoming calls from preselected telephone numbers. This is a C...