Cisco MWR-1900-27 - Manuals

Cisco MWR-1900-27 – Manual in PDF format online.

Manuals:

Manual

Manual Cisco MWR-1900-27

Summary

Page 2 - Regulatory Standards Compliance

2 Regulatory Standards Compliance 78-13978-03 Regulatory Standards Compliance Regulatory Standards Compliance The Cisco MWR 1900 router is in compliance with the national and international standards described in Table 1 . The Cisco MWR 1900 router complies with the following standards: • FCC Class A...

Page 3 - FCC Class A Compliance; FCC Part 68 Notice

3 FCC Class A Compliance 78-13978-03 Regulatory Standards Compliance FCC Class A Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmfu...

Page 4 - EMC Environmental Conditions; FCC Class A Warning

4 EMC Environmental Conditions 78-13978-03 Regulatory Standards Compliance The facility interface and service order codes are shown in Table 2 . Cisco MWR-1900-27 routers (bearing labeling identification number US:5B1DDNAN0006) comply with the following requirements: • FCC Rules and Regulations 47 C...

Page 5 - CISPR 22 Class A Warning; JATE Certification; Operating Conditions for Canada

5 CISPR 22 Class A Warning 78-13978-03 Operating Conditions for Canada the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the inte...

Page 6 - Operating Conditions for the European Community

6 Operating Conditions for the European Community 78-13978-03 Operating Conditions for the European Community • Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or e...

Page 8 - Installation Warning

8 Installation Warning 78-13978-03 Translated Safety Warnings Installation Warning Aviso Este símbolo de aviso indica perigo. Encontra-se numa situação que lhe poderá causar danos físicos. Antes de começar a trabalhar com qualquer equipamento, familiarize-se com os perigos relacionados com circuitos...

Page 9 - Installation Warning—Qualified Personnel

9 Installation Warning—Qualified Personnel 78-13978-03 Translated Safety Warnings Installation Warning—Qualified Personnel Restricted Area Warning Invisible laser radiation when this component is opened and the preregulation is disabled. Do not look into the laser beam. Warning Only trained and qual...

Page 11 - Jewelry Removal Warning

11 Jewelry Removal Warning 78-13978-03 Translated Safety Warnings Jewelry Removal Warning Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause seriou...

Page 12 - Power Supply Disconnection Warning

12 Power Supply Disconnection Warning 78-13978-03 Translated Safety Warnings Power Supply Disconnection Warning Warning Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect the power at the circuit breaker on DC units. Waarschuwing Voordat u aan e...

Page 13 - Power Supply Warning

13 Power Supply Warning 78-13978-03 Translated Safety Warnings Power Supply Warning Warning Do not touch the power supply when the power cord is connected. For systems with a power switch, line voltages are present within the power supply even when the power switch is off and the power cord is conne...

Page 14 - Grounded Equipment Warning

14 Grounded Equipment Warning 78-13978-03 Translated Safety Warnings Grounded Equipment Warning ¡Advertencia! No tocar la fuente de alimentación mientras el cable esté enchufado. En sistemas con interruptor de alimentación, hay voltajes de línea dentro de la fuente, incluso cuando el interruptor est...

Page 15 - Ground Connection Warning

15 Ground Connection Warning 78-13978-03 Translated Safety Warnings Ground Connection Warning Warning When installing the unit, always make the ground connection first and disconnect it last. Waarschuwing Bij de installatie van het toestel moet de aardverbinding altijd het eerste worden gemaakt en h...

Page 17 - Power Cabling Warning

17 Power Cabling Warning 78-13978-03 Translated Safety Warnings Power Cabling Warning Main Disconnecting Device Warning Secure all power cabling when installing this unit to avoid disturbing field-wiring connections. Waarschuwing Zet alle stroomkabels vast wanneer dit toestel wordt geïnstalleerd om ...

Page 18 - Exposed DC Power Wire Warning

18 Exposed DC Power Wire Warning 78-13978-03 Translated Safety Warnings Exposed DC Power Wire Warning Warnung Der Netzkabelanschluß am Gerät muß jederzeit zugänglich sein, weil er als primäre Ausschaltvorrichtung dient. Avvertenza Il gruppo spina-presa deve essere sempre accessibile, poiché viene ut...

Page 19 - Lightning Activity Warning

19 Lightning Activity Warning 78-13978-03 Translated Safety Warnings Lightning Activity Warning Aviso Um fio condutor exposto de uma unidade de entrada de DC (corrente contínua) pode transportar níveis perigosos de electricidade. Certifique-se de que nenhuma secção exposta de um fio condutor da font...

Page 20 - SELV Circuit Warning

20 SELV Circuit Warning 78-13978-03 Translated Safety Warnings SELV Circuit Warning Warning The Ethernet 10/100BaseT, Token Ring, serial, console, and auxiliary ports contain safety extra-low voltage (SELV) circuits. BRI circuits are treated like telephone-network voltage (TNV) circuits. Avoid conne...

Page 21 - DC Power Disconnection Warning—Transverter

21 DC Power Disconnection Warning—Transverter 78-13978-03 Translated Safety Warnings DC Power Disconnection Warning—Transverter Warning Before performing any of the following procedures, ensure that DC power to the transverter you will be working on is turned OFF. To ensure that the power to the spe...

Page 22 - DC Power Connection Warning—Circuit Breaker

22 DC Power Connection Warning—Circuit Breaker 78-13978-03 Translated Safety Warnings DC Power Connection Warning—Circuit Breaker ¡Advertencia! Antes de proceder con los siguientes pasos, comprobar que la alimentación del circuito de corriente continua (CC) con el que se va a trabajar esté cortada (...

Page 23 - Chassis Warning—Rack-Mounting and Servicing

23 Chassis Warning—Rack-Mounting and Servicing 78-13978-03 Translated Safety Warnings Chassis Warning—Rack-Mounting and Servicing ¡Advertencia! Después de cablear la fuente de alimentación de corriente continua, retirar la cinta de la palanca del interruptor automático, y restablecer la alimentación...

Page 25 - Obtaining Documentation; World Wide Web

25 Obtaining Documentation 78-13978-03 Obtaining Documentation Obtaining Documentation The following sections provide sources for obtaining documentation from Cisco Systems. World Wide Web You can access the most current Cisco documentation on the World Wide Web at the following sites: • http://www....

Page 26 - Ordering Documentation; Documentation Feedback; Obtaining Technical Assistance

26 Ordering Documentation 78-13978-03 Obtaining Technical Assistance Ordering Documentation Cisco documentation is available in the following ways: • Registered Cisco Direct Customers can order Cisco Product documentation from the Networking Products MarketPlace: http://www.cisco.com/cgi-bin/order/o...

Page 27 - Technical Assistance Center; Contacting TAC by Using the Cisco TAC Website; Contacting TAC by Telephone

27 Technical Assistance Center 78-13978-03 Obtaining Technical Assistance Customers and partners can self-register on Cisco.com to obtain additional personalized information and services. Registered users can order products, check on the status of an order, access technical support, and view benefit...