Cisco EVOKE-1 - Manuals

2 Unpacking This section lists the contents of your EVOKE-1 Elgar package. Contact us if any items are missing or damaged. EVOKE-1 Elgar digital radio unit . 230V AC to 12V DC mains power adapter. Removable telescopic aerial (fitted to unit). Warranty registration card.

3 Controls and Connectors This section provides information on the controls and connectors available on the front and rear panels of your EVOKE-1 Elgar. Front Panel Backlit LCD display Vol knob adjusts the volume Preset buttons ( 1-6 ) for up to six stations, see page 10 Autotune button provides one...

4 Rear Panel Aerial socket for connection to the supplied telescopic or other aerial Headphone socket (3.5mm) for connection to headphones Aux Speaker socket (3.5mm) for connection to the optional ST-1 speaker for full stereo output Stereo Line Out socket (3.5mm) analogue output for connection to an...

5 Connecting up This section provides information on connecting your aerial, power adapter and other devices. Connector sockets are provided on the rear panel of your EVOKE-1 Elgar. Before connecting other devices to your EVOKE-1 Elgar, switch both devices off. For a quick setup you can connect just...

6 Connecting to power supply Once you have made all other connections, connect the supplied power lead to the socket on the rear of your digital radio and plug the power adapter into a wall outlet. Connecting an auxiliary speaker You can connect a second unpowered speaker to your EVOKE-1 Elgar radio...

7 Switching on and off Before switching on for the first time, check all connections, extend your aerial and ensure that the volume is low. Push and release the Power button to switch the unit on or off. The LCD screen will light up when the unit is on. Tuning Using your EVOKE-1 Elgar This section p...

8 Autotune local - scans all frequencies in the UK channel allocation. This should only take a few seconds. Autotune full - scans the full range of digital frequencies in Band III. This may take a minute or more. 1. Ensure your EVOKE-1 Elgar is switched on and the aerial is connected and fully exten...

9 Changing the display mode EVOKE-1 Elgar has six display modes which enable you to view parts of the broadcast data on the bottom line of the display. Press the Display button and repeat to cycle through the six different display modes. Scrolling text The default mode, displays scrolling text messa...

11 Advanced setup options The EVOKE-1 Elgar has a number of advanced features which enable you to change the order and number of stations on the station list, use a tuning aid, apply Dynamic Range Control (DRC) and view the software version. Press the Setup button to enter the advanced setup menu, t...

13 Resetting your EVOKE-1 Elgar A reset option is provided to enable you to reset your unit. This removes all presets, stored stations and favourite station settings and resets all options to defaults. Performing an autotune process will solve most problems but you may want to use this option if you...

14 Guide to digital radio Your EVOKE-1 Elgar enables you to receive and listen to DAB radio programmes. Digital Audio Broadcast (DAB) uses digital signals rather than traditional analogue signals enabling near CD-quality audio with virtually interference-free reception. DAB also enables broadcasters...

15 Useful addresses The following addresses provide additional useful information about digital radio including coverage, available ser vices and usage tips: Digital Radio Development Bureau tel: 08707 747474 The Radio centre e-mail: [email protected] 77 Shaftesbur y Avenue web: www.digitalradionow.com ...

16 Troubleshooting This section gives some of the most likely solutions to problems you might have with your EVOKE-1 Elgar. I can’t get any sound Make sure your EVOKE-1 Elgar is plugged in and switched on as explained on page 7.Check that the volume is not set too low, see page 8 for details.Ensure ...

17 Your EVOKE-1 Elgar is supplied with a telescopic DAB aerial. This is an indoor aerial which is designed to give good re cep tion in areas with good to moderate DAB signal strength. In areas with poor DAB coverage or poor signal strength you may want to consider using a loft mounted or external ae...

18 Accessories PURE Digital supply a range of accessories and complementar y products for your EVOKE-1 Elgar including a matching cherr y wood ST-1 auxiliar y speaker for stereo output, external aerials, signal boosters, audio cables and adapters. Like EVOKE-1 Elgar the matching cherr y wood ST-1 is...

19 Technical specifications This section lists the technical specifications for the EVOKE-1 Elgar. General Stereo digital radio (stereo output possible with auxiliar y speaker) with full Band III reception capability, for reception of all UK DAB broadcasts. Fully compliant with ETS 300 401 and capab...