Cisco EHWIC1GESFPCU - Manuals

Page 2 - Contents

2 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Contents Contents • Prerequisites for the EHWIC 1 GE-SFP-CU • Restrictions for the EHWIC 1 GE-SFP-CU • Overview of the EHWIC 1 GE-SFP-CU • Configuring the EHWIC 1 GE-SFP-CU • Configuring Loopback • Configuration Examp...

Page 3 - Feature History

3 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Overview of the EHWIC 1 GE-SFP-CU Overview of the EHWIC 1 GE-SFP-CU The Cisco Gigabit Ethernet WAN EHWIC (EHWIC 1 GE-SFP-CU) is an enhanced high-speed interface card providing copper and optical Gigabit Ethernet ports...

Page 4 - LEDs; SUMMARY STEPS

4 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Configuring the EHWIC 1 GE-SFP-CU LEDs Table 1 lists the LEDs and describes their functionality and different states. The LEDs provide a visual indication of your available services. Table 1 LED Indicators Configuring...

Page 5 - DETAILED STEPS; Configuring Loopback

5 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Configuring Loopback DETAILED STEPS Configuring Loopback Use the loopback command in interface configuration mode to configure loopback. The EHWIC 1 GE-SFP-CU supports MAC layer loopback and driver type loopback. The ...

Page 6 - Configuration Examples for EHWIC 1 GE-SFP-CU

6 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU Configuration Examples for EHWIC 1 GE-SFP-CU This section provides the following configuration examples: • EHWIC 1 GE-SFP-CU Running Configuration, page 6 • Show Controller...

Page 9 - Show Controller Output

9 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU PID: PVDM2-64 , VID: V01 , SN: FOC1052368L NAME: "SM-ES3-24-P: EtherSwitch SM L3 + PoE + 23 10/100 + 1 10/100/1000 on Slot 1", DESCR: "SM-ES3-24-P: EtherSwitch ...

Page 12 - Show Interface Output

12 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Configuration Examples for EHWIC 1 GE-SFP-CU Management Interrupt Enable (0x6000): Hwic Int Frame Mgmt Int 0x06 IRQ2 Int 0 IRQ1 Int 0 Graceful Stop Tx Int 0 Network Interrupt Enable (0x3C00): Rx Frame Drop Int 1 Gene...

Page 13 - Configuring SFPs; Restrictions

13 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Configuring SFPs Hardware is EHWIC-1GE-SFP-CU, address is 000f.f7a2.912b (bia 000f.f7a2.912b) Internet address is 1.1.1.2/24 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload...

Page 15 - Examples; Additional References

15 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Additional References Examples This example shows how to configure a third-party SFP on a Cisco ISR G2 Series Router: Router# configure terminal Router(config-if)# service unsupported-transceiver Router(config)# inte...

Page 16 - Standards

16 Configuring Gigabit Ethernet Enhanced High-Speed WAN Interface Cards OL-24318-02 Additional References Standards MIBs RFCs Technical Assistance Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco ...