Cisco Digital Camera - Manuals

Page 2 - Cisco VT Camera Package; Installation Requirements

2 Cisco VT Camera Package Review the following list to make sure you have received all the necessary items to install Cisco VT Advantage. • 1 Cisco VT Camera with attached USB cable • 1 flexible camera base • 1 privacy shade • this Cisco VT Advantage Quick Start Guide See Figure 1 in the “How to Set...

Page 5 - Installing Cisco VT Advantage; Installation Sequence; How to Set Up the Cisco VT Camera

5 Installing Cisco VT Advantage Make sure you have read the “Getting Started” section on page 1 before you begin installing Cisco VT Advantage. Installation Sequence You must follow this sequence when installing Cisco VT Advantage: 1. First, remove the Cisco VT Camera parts from the packaging and se...

Page 7 - Procedure

7 Procedure Caution Do not connect the camera to your PC until prompted to do so during the installation of the Cisco VT Advantage software. 1. Remove the camera, privacy shade, and the flexible camera base from the packaging. 2. Mount the camera on the flexible camera base: a. Insert the protruding...

Page 9 - How To Install Cisco VT Advantage

9 How To Install Cisco VT Advantage Your system administrator will likely provide you with instructions about how to obtain the Cisco VT Advantage software and user guide at your site. If you did not receive those instructions, contact your system administrator. Note Cisco VT Advantage supports only...

Page 10 - Using Your Cisco VT Camera; Cisco VT Camera Features

10 1. Close and Exit any open applications on your PC, and then start the Cisco VT Advantage installation program. 2. Follow the on-screen prompts to complete the installation. For more information about your Cisco VT Camera, see the “Using Your Cisco VT Camera” section on page 10 . For more informa...

Page 12 - Tips for Positioning Your Cisco VT Camera; Using Cisco VT Advantage

12 Tips for Positioning Your Cisco VT Camera • Place the camera in the middle of your PC monitor or flat panel screen, or on a table top, for optimal eye contact. Lift up the privacy shade. • Pivot the camera up or down, left or right, for the best position. • View live video to guide your focus adj...

Page 13 - Regulatory Compliance; Specification

13 Regulatory Compliance and Safety Information This section describes the regulatory compliance and safety information for the Cisco VT Camera. Regulatory Compliance The Cisco VT Camera meets the following regulatory compliance and safety standards: Specification Description Regulatory Compliance P...

Page 15 - FCC Class B Compliance

15 FCC Class B Compliance This equipment has been tested and found to comply with the limits for a Class B Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generated, us...

Page 16 - Canada Class B Notice; Korea Class B Notice

16 Canada Class B Notice This Class ‘B’ digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe ‘B’ est conforme à la norme NMB-003 du Canada. Korea Class B Notice Warning This is a Class B Device and is registered for EMC requirements for residential use. This device ...

Page 21 - Duration of Hardware Warranty

21 3. To read translated and localized warranty information about your product, follow these steps: a. Enter this part number in the Warranty Document Number field: 78-10747-01C0 b. Select the language in which you would like to view the document. c. Click Go . The Cisco warranty page appears. d. Re...

Page 22 - Replacement, Repair, or Refund Policy for Hardware

22 Replacement, Repair, or Refund Policy for Hardware Cisco or its service center will use commercially reasonable efforts to ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the custome...