Cisco Cisco 10005 ESR - Manuals

Adding or Replacing a DC PEM 8 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Adding or Replacing a DC PEM This section describes how to add or replace a DC PEM in a Cisco 10005 chassis. It contains these procedures: • Installing a Second DC PEM • Replacing a DC PEM • Wiring a DC PEM...

9 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Adding or Replacing a DC PEM Figure 2 Inserting a DC PEM To complete the installation, follow the steps in the “Wiring a DC PEM” section on page 12 . Replacing a DC PEM Warning Never install an AC power module and a DC power module in ...

Adding or Replacing a DC PEM 12 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Wiring a DC PEM This section provides procedures for connecting a DC PEM to a DC power source. Preparing to Connect Power and Ground Follow these steps to prepare the power and ground wires to be connected...

13 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Adding or Replacing a DC PEM Connecting DC Ground Warning When you are installing or replacing the unit, the ground connection must always be made first and disconnected last. To attach the grounding wire to the grounding receptacle o...

Adding or Replacing a DC PEM 16 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Connecting DC Power Warning Only a DC power source that is isolated from AC mains with reinforced insulation, and that complies with the other safety extra-low voltage (SELV) requirements in UL1950, CSA 95...

Adding or Replacing a DC PEM 18 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Step 9 Secure the power cabling to the chassis by feeding a tie wrap through the slot on the side of the chassis and binding the cables. Dress the cables so that the fan assembly on the right and the air f...

19 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Adding or Replacing a DC PEM Troubleshooting the Installation Table 2 provides information you can use to solve problems with a DC PEM. Table 2 Troubleshooting the DC PEM Symptom Steps to Take System fails to power on Check that: • Al...

FCC Class B Compliance 20 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 FCC Class B Compliance The equipment described in this manual generates and might radiate radio-frequency energy. If it is not installed in accordance with Cisco installation instructions, it might cause interfe...

21 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Related Documentation Related Documentation This section lists the manuals in the Cisco 10000 series documentation set. Manuals for All Cisco 10000 Series Routers • Technology of Edge Aggregation: Cisco 10000 Series Edge Services Rout...

Obtaining Documentation 22 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 • Cisco 10005 ESR DC Power Entry Module Installation • Cisco 10005 ESR Fan Assembly Installation Obtaining Documentation The sections that follow provide sources for obtaining documentation from Cisco Systems. ...

23 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Obtaining Technical Assistance • Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store: http://www.cisco.com/go/subscription • Nonregistered Cisco.com users can order documentation through...

Obtaining Technical Assistance 24 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Cisco.com Cisco.com is the foundation of a suite of interactive, networked services that provides immediate, open access to Cisco information and resources at anytime, from anywhere in the world. This hi...

25 Cisco 10005 ESR DC Power Entry Module Installation 78-12653-01 Obtaining Technical Assistance P3 and P4 level problems are defined as follows: • P3—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue. • P4—You need information ...