Cisco AIRANT5114P2MN - Manuals

Page 2 - Technical Specifications

2 Cisco Aironet 5-GHz 14-dBi Directional Antenna (AIR-ANT5114P2M-N) 78-20958-01 Technical Specifications Technical Specifications Antenna type 2-Element Patch Array Operating frequency range 5150–5900 MHz Nominal input impedance 50 Ohms Peak gain 14 dBi Polarization Linear, Dual Elevation plane 3-dB...

Page 3 - System Requirements

3 Cisco Aironet 5-GHz 14-dBi Directional Antenna (AIR-ANT5114P2M-N) 78-20958-01 System Requirements System Requirements This antenna is designed for use with Cisco Aironet access points and bridges but can be used with any 5-GHz Cisco Aironet radio device that uses an N-male connector. Safety Precau...

Page 4 - Installation Guidelines

4 Cisco Aironet 5-GHz 14-dBi Directional Antenna (AIR-ANT5114P2M-N) 78-20958-01 Installation Guidelines 3. Call your electric power company. Tell them your plans and ask them to come look at your proposed installation. This is a small inconvenience considering your life is at stake. 4. Plan your ins...

Page 5 - Site Selection; Installing the Antenna; Tools and Equipment Required

5 Cisco Aironet 5-GHz 14-dBi Directional Antenna (AIR-ANT5114P2M-N) 78-20958-01 Installing the Antenna Site Selection Before attempting to install your antenna, determine where you can best place the antenna for safety and performance. Follow these steps to determine a safe distance from wires, powe...

Page 6 - Mounting on a Pole

6 Cisco Aironet 5-GHz 14-dBi Directional Antenna (AIR-ANT5114P2M-N) 78-20958-01 Installing the Antenna Mounting on a Pole Follow these steps to mount your antenna on a pole. Step 1 Remove antenna and mount kit from packaging. Step 2 Attach antenna mount bracket to the back of the antenna as shown ap...

Page 11 - Installing the Optional Mounting Bracket Kit; Mounting on a Vertical Surface

11 Cisco Aironet 5-GHz 14-dBi Directional Antenna (AIR-ANT5114P2M-N) 78-20958-01 Installing the Antenna Installing the Optional Mounting Bracket Kit Using an optional antenna mounting bracket kit, the AIR-ANT5114P2M-N antenna can be mounted directly on an access point in a strand mount or pole mount...

Page 12 - Antenna Cable Information

12 Cisco Aironet 5-GHz 14-dBi Directional Antenna (AIR-ANT5114P2M-N) 78-20958-01 Installing the Antenna Figure 7 Distance Between Bracket Mounting Holes Step 5 Attach antenna assembly to azimuth bracket, as shown in Figure 4 . Step 6 Adjust the position of the antenna to the desired azimuth and elev...

Page 13 - Grounding the Antenna; Obtaining Documentation and Submitting a Service Request

13 Cisco Aironet 5-GHz 14-dBi Directional Antenna (AIR-ANT5114P2M-N) 78-20958-01 Installing the Antenna Note The antenna cable has a 0.5 in. (12.7 mm) bend radius. Sharply bending or crimping the cable may cause a degradation in performance. The antenna terminates with an N-male plug after a short, ...