Cisco AIRANT2544V4MR - Manuals

Page 2 - Technical Specifications

2 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01 Technical Specifications Technical Specifications Table 1 AIR-ANT2544V4M-R Dual-Band MIMO Wall-Mounted Omnidirectional Antenna Specifications Antenna type 4-element MIMO omnidirectional Operating frequ...

Page 4 - System Requirements

4 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01 System Requirements System Requirements This antenna is designed for indoor and outdoor use with any Cisco Aironet radio device with dual-band (2.4- and 5-GHz) RP-TNC connectors. 2.4-GHz Antenna 3 Azim...

Page 5 - Safety Precautions

5 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01 Safety Precautions Safety Precautions Warning Do not locate the antenna near overhead power lines or other electric light or power circuits, or where it can come into contact with such circuits. When i...

Page 6 - Installation Notes; Choosing a Mounting Location

6 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01 Installation Notes Installation Notes Antennas transmit and receive radio signals which are susceptible to RF obstructions and common sources of interference that can reduce throughput and range of the...

Page 7 - Installing the Antenna; Tools and Equipment Required

7 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01 Installing the Antenna Installing the Antenna You can install the antenna on any flat vertical surface, on a pole, or on a ceiling. All hardware for mounting the antenna on a wall or ceiling is provide...

Page 8 - Mounting on a Vertical Surface

8 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01 Installing the Antenna Mounting on a Vertical Surface Follow these steps to mount your antenna on a vertical surface. Step 1 Attach the antenna bracket to the antenna using the jam nut provided ( Figur...

Page 11 - Outdoor Installations

11 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01 Installing the Antenna Figure 5 Azimuth and Elevation Adjustment Outdoor Installations You can mount this antenna outdoors. If you mount the antenna outdoors, you must ensure that the antenna cables e...

Page 12 - Mounting on a Mast

12 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01 Installing the Antenna Figure 6 Mounting on a Ceiling Mounting on a Mast The antenna can be mounted on a mast rather than on a wall using two 1/2 inch-wide hose clamps (not provided). To mount the ant...

Page 13 - Suggested Cable; Obtaining Documentation and Submitting a Service Request

13 Cisco Aironet Dual-Band MIMO Wall-Mounted Omnidirectional Antenna (AIR-ANT2544V4M-R) 78-20770-01 Suggested Cable Step 4 To adjust the azimuth and elevation, loosen the bolt that attaches the antenna bracket to the mounting bracket ( Figure 5 ). Azimuth can be adjusted ±90 degrees. Elevation can b...