Cisco 78-16019-02 - Manuals

Cisco 78-16019-02 – Manual in PDF format online.

Manuals:

Manual

Manual Cisco 78-16019-02

Summary

Page 2 - Using the Console Ports, NME Ports, and Auxiliary Ports

3-2 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Starting Up the Cisco ONS 15530 The CPU switch module provides a slot on the front panel that accommodates a CompactFlash card. Youcan use the CompactFlash card fo...

Page 3 - Modem Support; About Passwords; Enable Password

3-3 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About Passwords Modem Support The auxiliary port of the Cisco ONS 15530 provides modem connection support. The following settingson the modem are required: • Enabl...

Page 4 - Configuring IP Access on the NME Interface

3-4 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring IP Access on the NME Interface Configuring IP Access on the NME Interface The Fast Ethernet interface, or NME, on the active CPU switch module, named f...

Page 5 - Displaying the NME Interface Configuration

3-5 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring IP Access on the NME Interface The Cisco ONS 15530 NME interface should now be operating correctly. Note If a CPU switch module switchover occurs, you ...

Page 6 - Displaying the Operating Configurations; Configuring the Host Name

3-6 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring the Host Name Example Switch# show interfaces fastethernet 0 FastEthernet0 is up, line protocol is up Hardware is AmdFE, address is 0000.1644.28ea (bia...

Page 7 - About NTP

3-7 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About NTP Note The host name is also synchronized with the standby CPU switch module. The host name prompt onthe standby CPU switch module appears with “sby-” as a...

Page 8 - Configuring NTP; Displaying the NTP Configuration

3-8 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring NTP implementation allows a machine to be configured so that it acts as though it is synchronized using NTP,when in fact it has determined the time usi...

Page 9 - Configuring Security Features; Configuring AAA; Configuring Authentication; Configuring Accounting

3-9 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features Configuring Security Features The Cisco ONS 15530 supports the following Cisco IOS software security features: • AAA (authentication,...

Page 10 - Configuring Kerberos

3-10 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features method you have implemented) in the form of accounting records. Each accounting record containsaccounting attribute-value (AV) pairs...

Page 11 - Configuring Traffic Filters and Firewalls

3-11 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features Configuring TACACS+ To configure your router to support TACACS+, perform the following tasks: Step 1 Use the aaa new-model global co...

Page 12 - About CPU Switch Module Redundancy

3-12 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Refer to the “Configuring Passwords and Privileges” part in the Cisco IOS Security Configuration Guide . About CPU Switch Modul...

Page 14 - Redundant Operation Requirements

3-14 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Redundant Operation Requirements For fully redundant operation, the following requirements must be met: • Two CPU switch module...

Page 15 - Configuring CPU Switch Module Redundancy; Forcing a Switchover from Privileged EXEC Mode

3-15 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy • The active CPU switch module fails. The standby CPU switch module takes over as the active CPUswitch module, using the ...

Page 16 - Forcing a Switchover from ROM Monitor Mode

3-16 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Forcing a Switchover from ROM Monitor Mode You can manually force the standby CPU switch module to take over as the activ...

Page 17 - Configuring Autoboot; Displaying the Autoboot Configuration

3-17 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Autoboot If you have changed the default configuration register value from autoboot, you can change it back b...

Page 18 - Synchronizing the Configurations; Synchronizing Configurations Manually

3-18 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Example The following example shows the contents of the configuration register: Switch# show version Cisco Internetwork O...

Page 19 - Enabling and Disabling Automatic Synchronization

3-19 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Example The following example shows how to manually synchronize the running configuration: Switch# redundancy manual-sync...

Page 20 - Configuring Maintenance Mode

3-20 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Maintenance Mode You can configure the Cisco ONS 15530 to enter the redundancy maintenance mode. Configuratio...

Page 23 - Reloading the CPU Switch Modules

3-23 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy deviation_numbers_str YES N/A N/A manufacturing_use YES 0 0 rma_number_str YES rma_failure_code_str YES oem_str YES Cisco...

Page 25 - About the Software Configuration Register

3-25 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register Example The following example shows the privileged EXEC mode access status on the standby CPU switchmodule: Switch# show...

Page 26 - Software Configuration Register Settings

3-26 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register • Enable booting from a TFTP server • Recover a lost password • Boot the system manually using the boot command at the b...

Page 27 - Boot Field Values

3-27 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register Bit 12 and bit 11 in the configuration register determine the data transmission rate of the consoleterminal. Table 3-6 s...

Page 28 - Default System Boot Behavior; Boot Command

3-28 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register Table 3-7 describes the values for the boot field. Default System Boot Behavior The factory default value for the config...

Page 29 - Changing the Software Configuration Register; Verify the Configuration Register Value

3-29 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Changing the Software Configuration Register Changing the Software Configuration Register To change the configuration register, perform the following steps: Note ...

Page 30 - About Fan Failure Shutdown; Configuring Fan Failure Shutdown

3-30 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About Fan Failure Shutdown About Fan Failure Shutdown The Cisco ONS 15530 fan assembly is located at the bottom of the chassis and contains six individualfans and...

Page 31 - Displaying the Fan Tray Failure Shutdown Configuration

3-31 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Fan Failure Shutdown Displaying the Fan Tray Failure Shutdown Configuration To display the fan tray failure shutdown configuration, use the following ...