Cisco 5505 - Manuals - manualsarea.com

Page 3 - PoE Ports and Devices; Installing the Chassis

4-3 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 PoE Ports and Devices PoE Ports and Devices On the ASA 5505, switch ports Ethernet 0/6 and Ethernet 0/7 support PoE devices that are compliant with the IEEE 802.3af standard, such as IP phones and wireless access points...

Page 4 - Connecting to Network Interfaces

Chapter 4 Installing the ASA 5505 Connecting to Network Interfaces 4-4 ASA 5505 Getting Started Guide 78-18003-02 b. Use one of the yellow Ethernet cables to connect the device to a cable/DSL/ISDN modem. Note By default, switch port 0 is the outside port. Step 3 Connect your network devices with an ...

Page 6 - Setting Up a PC for System Administration

Chapter 4 Installing the ASA 5505 Setting Up a PC for System Administration 4-6 ASA 5505 Getting Started Guide 78-18003-02 Note The ASA 5505 does not have a power switch. Completing Step 3 powers on the device. Step 4 Check the power LED; if it is solid green, then the device is powered on. For more...

Page 7 - Optional Procedures; Connecting to the Console

4-7 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Optional Procedures When you connect other devices to any of the inside ports, make sure that they do not have the same IP address. Note The MGMT interface of the adaptive security appliance is assigned 192.168.1.1 by d...

Page 8 - Installing a Cable Lock

Chapter 4 Installing the ASA 5505 Optional Procedures 4-8 ASA 5505 Getting Started Guide 78-18003-02 Figure 4-3 Connecting to the Console To connect a console for local, command-line administrative access, perform the following steps: Step 1 Plug one end of the PC terminal adapter into a standard 9-...

Page 9 - Ports and LEDs; Front Panel Components

4-9 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 Ports and LEDs To install a cable lock, perform the following steps: Step 1 Follow the directions from the manufacturer for attaching the other end of the cable for securing the adaptive security appliance. Step 2 Attac...

Page 10 - Color

Chapter 4 Installing the ASA 5505 Ports and LEDs 4-10 ASA 5505 Getting Started Guide 78-18003-02 Figure 4-4 illustrates the front panel of the ASA 5505. Figure 4-4 ASA 5505 Front Panel 153382 Cisco ASA 5505 series Adaptive Security Appliance 0 0 0 0 0 0 0 0 0 LINK/ACT Power Status Active VPN SSC 3 1...

Page 12 - Rear Panel Components; Port or LED

Chapter 4 Installing the ASA 5505 Ports and LEDs 4-12 ASA 5505 Getting Started Guide 78-18003-02 Rear Panel Components Figure 4-5 illustrates the back panel of the ASA 5505. Figure 4-5 ASA 5505 Rear Panel 153383 SecurityServicesCard Slot 1 2 Console RESET power48 VDC 7 POWER over ETHERNET 6 5 4 3 2 ...

Page 13 - What to Do Next

4-13 ASA 5505 Getting Started Guide 78-18003-02 Chapter 4 Installing the ASA 5505 What to Do Next What to Do Next Continue with Chapter 5, “Configuring the Adaptive Security Appliance.” 6 2 USB ports v2.0 ports Reserved for future use. 7 Ethernet switch ports 0–7 Layer 2 switch ports that provide fl...