Cisco 3.1(6) - Manuals - manualsarea.com

Page 2 - Prerequisites

and hardware components must be installed by the installer of the Cisco Unity system. The CiscoUnity software package is purchased from Cisco or from a Cisco reseller. The package includes allrequired software except Windows 2000 Server. This document explains how to install a Windows 2000 Server fo...

Page 3 - Requirements; Components Used; Task 1: Start the Windows 2000 Server Initial Installation

Requirements Before you attempt this configuration, ensure that you meet these requirements: Windows 2000 Server Administration. • IP Addressing and related TCP/IP configuration options such as DNS, gateways, and so forth. • Components Used The information in this document is based on these software...

Page 6 - Task 3: Complete the Message Queing Configuration

If the server that you are configuring is going to run Active Directory, you must enable Fileand Print Sharing For Microsoft Networks. This is required because Active Directory usesNetworking in order to share the Active Directory files. This applies even when the server isthe only one in the entire...

Page 7 - Select the Add/Remove Windows Components option.

Select the Add/Remove Windows Components option. A menu screen similar to this image appears. 3. Select the Configure Message Queueing Services (Configure) option. Follow the prompts in order to complete the installation of Message Queueing Services. There are nouser configurable options for this ta...

Page 9 - Task 5: Install Internet Explorer 5.5 with Service Pack 2

Un−select the Show this screen at startup option. Then close this window. 8. Task 4: Install Additional Windows 2000 Languages(Optional) If you want to view the Windows user interface in languages other than English, install the applicablelanguages. Log onto Windows. 1. Based on the language(s) you ...

Page 12 - tracert command instead.; Task 12: Configure Internet Explorer for the First Time; Start Internet Explorer.

tracert command instead. c:\>tracert ip_address You should see a response something like this: Tracing route to [x.x.x.x] over a maximum of 30 hops: 1 <10ms <10ms <10ms [y.y.y.y] Where y.y.y.y is the IP address of the first gateway between your server and the IP address that youused. If ...

Page 13 - Browse to the Bootdisk directory.; Note: Client for Microsoft Networks is not required.

Browse to the Bootdisk directory. 3. Double−click Makebt32.exe. 4. Follow the on−screen prompts. 5. Go to step 1 in Task 1. 6. Appendix B: Configure the Most Common TCP/IPParameters Complete this procedure in order to configure the most common TCP/IP parameters. Note: Cisco Technical Support recomme...

Page 17 - NetPro Discussion Forums − Featured Conversations; Related Information; Voice Technology Support

NetPro Discussion Forums − Featured Conversations Networking Professionals Connection is a forum for networking professionals to share questions, suggestions,and information about networking solutions, products, and technologies. The featured links are some of themost recent conversations available ...