Cisco 3 - Manuals - manualsarea.com

Page 2 - Using the Console and the Management Ports; Modem Support; Modem Support for Recovering a System Image

3-2 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Using the Console and the Management Ports Step 4 Power on the switch router. Step 5 Enter CLI configuration mode by answe...

Page 3 - About Passwords; Configuring the Management Port

3-3 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Configuring the Management Port Xmodem or Ymodem protocols. The Xmodem and Ymodem protocols support different speeds of fi...

Page 5 - Configuring the Host Name

3-5 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Configuring the Host Name You can display the configuration file when you are in privileged EXEC (enable) mode. • To see t...

Page 6 - Viewing the Contents of Boot Flash Memory; Deleting Files from Boot Flash Memory

3-6 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Using the Boot Flash Memory SIMM Viewing the Contents of Boot Flash Memory You can perform the following tasks with the as...

Page 7 - Backing Up a System Image to a TFTP Server

3-7 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Using the Boot Flash Memory SIMM Backing Up a System Image to a TFTP Server To create a backup copy of your system image, ...

Page 9 - Erasing Files from a Full Boot Flash Memory SIMM

3-9 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Using the Boot Flash Memory SIMM Router# dir bootflash: Directory of bootflash:/ 1 -rw- 3173128 <no date> cat2948g-i...

Page 11 - Recovering a System Image Using Xmodem and Ymodem

3-11 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Recovering a System Image Using Xmodem and Ymodem Recovering a System Image Using Xmodem and Ymodem If you do not have ac...

Page 12 - Xmodem Transfer Example Using the ROM Monitor

3-12 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Recovering a System Image Using Xmodem and Ymodem To copy a Cisco IOS image from a computer or workstation to a router us...

Page 14 - Updating the System Image; Downloading System Images from CCO; Copying the System Image to the Switch Router

3-14 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Updating the System Image Updating the System Image This section provides minimal instructions for updating the system im...

Page 16 - Reloading the Switch Router

3-16 Catalyst 2948G-L3 and Catalyst 4908G-L3 Software Feature and Configuration Guide 78-10408-01, Cisco IOS Release 12.0(7)W5(15d) Chapter 3 Initial Switch Router Configurations Updating the System Image Verifying checksum... OK (0x799F) 3173128 bytes copied in 177.668 secs (17927 bytes/sec) Router...