Cisco 2600 Series - Manuals

Page 2 - Safety Warnings

2 Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers Safety Recommendations • Keep tools away from walk areas where you or others could fall over them. • Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and rollup your sleeves. • Wear safety ...

Page 3 - Safety with Electricity; Disconnect all power before doing the following:; — Installing or removing a chassis; Do not work alone if potentially hazardous conditions exist.; — Use caution do not become a victim yourself.; victim and then call for help.

Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers 3 Safety with Electricity To see translations of the remaining warnings that appear in this publication, refer to the RegulatoryCompliance and Safety Information document that accompanied the device. Safety with Electricity Follow t...

Page 4 - Preventing Electrostatic Discharge Damage; Required Tools and Equipment; This kit includes the following items:; Caution

4 Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers Required Tools and Equipment Seul le système d’alimentation redondant Cisco (RPS modèle PWR600-AC-RPS) doit servir àalimenter le dispositif externe. Das externe Gerät darf nur mit einer redundanten Stromversorgung von Cisco, Model...

Page 5 - Medium-size Phillips screwdriver; Removing the Cover; Warning

Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers 5 Removing the Cover Figure 1 Cisco RPS Adapter Plate for Cisco 2600 series Routers To install the Cisco RPS adapter plate, you will also need the following tools and equipment (whichare not included): • Cisco 2600 series router • M...

Page 7 - Removing the Power Supply; Take these steps to remove the power supply:

Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers 7 Removing the Power Supply Removing the Power Supply This section describes how to remove the internal power supply. Although the AC power supply isshown in the illustrations that follow, the procedure is the same for removing both...

Page 8 - Place the removed screw and power supply in an antistatic bag.; Installing the Redundant Power Supply Adapter Plate; Take these steps to install the Cisco RPS Adapter Plate:

8 Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers Installing the Redundant Power Supply Adapter Plate Step 3 Slide the power supply forward slightly in the chassis. This disengages the built-in hooksthat help secure the power supply to the chassis. (See Figure 6.) Figure 6 Removi...

Page 10 - Replacing the Cover; Take the following steps to replace the cover:

10 Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers Installing the Redundant Power Supply Adapter Plate Figure 11 Reconnecting the Connectors Replacing the Cover Take the following steps to replace the cover: Step 1 Position the two chassis sections, as shown in Figure 2. Step 2 R...

Page 11 - Obtaining Service and Support; Note; You can access CCO in the following ways:; Note

Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers 11 Obtaining Service and Support Obtaining Service and Support For service and support for a product purchased from a reseller, contact the reseller. Resellers offera wide variety of Cisco service and support programs, which are des...

Page 12 - Ordering Documentation

12 Installing the Cisco RPS Adapter Plate in Cisco 2600 Series Routers Ordering Documentation Ordering Documentation Cisco documentation and additional literature are available in a CD-ROM package, which ships withyour product. The Documentation CD-ROM, a member of the Cisco Connection Family, is up...