Chief XSM - Manuals - manualsarea.com

Page 2 - Installation Instructions; DISCLAIMER

XSM/XTM Series Installation Instructions 2 DISCLAIMER Milestone AV Technologies, and its affiliated corporations andsubsidiaries (collectively "Milestone"), intend to make thismanual accurate and complete. However, Milestone makes noclaim that the information contained herein covers all deta...

Page 3 - DIMENSIONS; XTM

Installation Instructions XSM/XTM Series 3 DIMENSIONS 1.75 44.5 1.00 25.4 .33 8.3 15.10 383.4 2.92 74.1 .96 24.4 48.54 1233 2.00 50.8 MINIMUM UPRIGHT SPACING 24" RAILS CAN BE SLID LEFT OR RIGHT FOR OFFSET 27.00 685.8 1.00 25.4 16.52 419.6 12° 1.92 48.7 MIN. DEPTH 27.00 685.8 .51 12.9 .40 10.2 0 ...

Page 4 - LEGEND

XSM/XTM Series Installation Instructions 4 LEGEND Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixador Allenta...

Page 5 - TOOLS REQUIRED FOR INSTALLATION

XSM/XTM Series Installation Instructions 5 TOOLS REQUIRED FOR INSTALLATION PARTS 7/32" (5.5mm) Wood Stud #2 5/16" (7.9mm) Concrete Custom XSMXXXX / XTMXXXX Hardware [Included with XSMXXXX / XTMXXXX Models Only] JA (6) M5 M (1) R (1) T (1) N (1) Q (4) [A-K used on XSMU/XTMU Models Only] A (6)...

Page 6 - INSTALLATION; Locate Mounting Site; Installing to a; Installing to a Wood Stud Wall

XSM/XTM Series Installation Instructions 6 INSTALLATION The XTM and XSM have been designed to be mounted directlyonto either a wood stud or concrete wall. The XTM has bracketswhich allow the display to be tilted. The XSM has static bracketswhich keep the display in an upright position. Locate Mounti...

Page 7 - Figure 2; Attaching Interface Brackets to Display; Installing to a Concrete Wall; MINIMUM HORIZONTAL DISTANCE; Figure 3; Slide rails to approximate center of screen location.

Installation Instructions XSM/XTM Series 7 Figure 2 8. Mark the attachment points for the lower mounting slots,making sure the attachment points are located on the studs.(See Figure 2) 9. Drill 7/32" pilot holes at markings for lower mounting holes.(See Figure 2) 10. Use two 5/16 x 2-1/2" la...

Page 8 - The diamond-shape hole in the bracket corresponds to; Figure 4; IMPROPER INSTALLATION CAN LEAD TO; Figure 5; Center of bracket

XSM/XTM Series Installation Instructions 8 Attaching Interface Brackets to Display 1. Align the center of the bracket with center of screen.(See Figure 4) NOTE: The diamond-shape hole in the bracket corresponds to the center of the mount. Figure 4 WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY F...

Page 9 - Figure 6

Installation Instructions XSM/XTM Series 9 3. If necessary, the tilt interface bracket knobs may beswitched to allow the interface brackets to be reversed.(See Figure 6) a. Remove display from mount.b. Remove interface brackets from display.c. Hold the right interface bracket horizontally, tightly g...

Page 10 - XTM Model; XSM Model; Figure 9

XSM/XTM Series Installation Instructions 10 XTM Model NOTE: Proceed to Step 8 for XSM Model instructions. 3. Hang top hook of interface brackets onto the top bar of themount. (See Figure 9) NOTE: The screen initially installs into the "kickstand mode" to allow easy cable access. 4. Slide scr...

Page 11 - Adjusting Roll/Height of Wall Brackets; Raises screen

Installation Instructions XSM/XTM Series 11 Adjusting Roll/Height of Wall Brackets NOTE: The height adjust wall brackets allow adjustment of+ 1/2". 1. Turn to right (tighten) to raise side of screen.(See Figure 11) 2. Turn to left (loosen) to lower side of the screen. Figure 11 Locking XTM Mount...

Page 12 - 014 Milestone AV Technologies; Europe; Franklinstraat 14, 6003 DK Weert, Netherlands; Asia Pacific

XSM/XTM Series Installation Instructions Chief, a products division ofMilestone AV Technologies 8800-002518 Rev00 2014 Milestone AV Technologies www.chiefmfg.com 03/14 USA/International A 6436 City West Parkway, Eden Prairie, MN 55344 P 800.582.6480 / 952.225.6000 F 877.894.6918 / 952.894.6918 Europ...