Chief SL220 - Manuals

Chief SL220 – Manual in PDF format online.

Manuals:

Manual

Manual Chief SL220

Summary

Page 2 - Installation Instructions; DISCLAIMER

SL220 Installation Instructions 2 DISCLAIMER Milestone AV Technologies, and its affiliated corporations andsubsidiaries (collectively, "Milestone"), intend to make thismanual accurate and complete. However, Milestone makes noclaim that the information contained herein covers all details,cond...

Page 3 - TABLE OF CONTENTS; PLACING SL220 INTO CEILING STRUCTURE. 11

Installation Instructions SL220 3 TABLE OF CONTENTS DISCLAIMER...................................................... 2 TABLE OF CONTENTS....................................... 3 TOOLS REQUIRED FOR INSTALLATION......... 4 PARTS................................................................ 4 LEGEND....

Page 4 - TOOLS REQUIRED FOR INSTALLATION

Installation Instructions SL220 4 TOOLS REQUIRED FOR INSTALLATION PARTS I/M x1 A (1)[SL220 Lift] B (1)[SL220 Frame] C (4)[Vertical Bracket] D (4)[Horizontal Bracket] E (4) 6-32 x 1/2" F (4) 6-32 x 5/16" H (1) [Outlet box attachment plate] J (1) J1 (4) 1/16" x 25’[Wire Cable] J2 (4)[Cable...

Page 5 - LEGEND

Installation Instructions SL220 5 LEGEND DIMENSIONS Tighten Fastener Apretar elemento de fijación Befestigungsteil festziehen Apertar fixador Serrare il fissaggio Bevestiging vastdraaien Serrez les fixations Loosen Fastener Aflojar elemento de fijación Befestigungsteil lösen Desapertar fixador Allen...

Page 6 - PREPARING FOR INSTALLATION; Installation Requirements; Preparing SL220 Framework; Figure 1; Installing SL220 Framework; Figure 2

SL220 Installation Instructions 6 PREPARING FOR INSTALLATION Installation Requirements The SL220 has been designed to be mounted recessed into asuspended ceiling consisting of 2’ x 2’ ceiling tiles and securedby a WireVice system. Electrical Rating 100-250VAC~, 50/60Hz, 960W North America: 120VAC, 6...

Page 7 - Securing SL220 Frame to Ceiling Structure; Figure 4; Figure 5; Steel Truss Ceiling Structure

Installation Instructions SL220 7 Securing SL220 Frame to Ceiling Structure 1. Examine ceiling structure (concrete, steel truss, or wood)above SL220 frame (B) to identify four support cableanchor locations. Each location should be approximately15° outside of support holes in SL220 frame (B). Markloc...

Page 8 - Wood Ceiling Structure; Installing Cable to SL220 Frame; Installing Junction Box and Outlet; Figure 9

SL220 Installation Instructions 8 Wood Ceiling Structure WARNING: Anchors must be installed into wood with a minimum thickness of 1-1/2" (38.1 mm) or greater. 1. Drill a 5/32" diameter x 1-1/2" deep pilot hole at eachmarked cable anchor support location. Ensure hole is atleast 5/8" f...

Page 9 - Electrical Rating; removed

Installation Instructions SL220 9 WARNING: IMPROPER INSTALLATION CAN LEAD TO LIFT FALLING CAUSING SEVERE PERSONAL INJURY ORDAMAGE TO EQUIPMENT! It is the installers responsibilityto make certain the structure to which the lift is beingmounted is capable of supporting five times the weight of thelift...

Page 10 - fully extend

SL220 Installation Instructions 10 IMPORTANT ! : Select power cord (W or X) suitable for location. If neither of those cords are suitable for your location,use a power cord that has an attachment plug on one end thatmeets IEC-60320 and on the other end is appropriate for usewith the grounded main ou...

Page 11 - PLACING SL220 INTO CEILING STRUCTURE

Installation Instructions SL220 11 Figure 14 5. While still pulling the projector cradle away from the sides ofthe SL220, slide front channels towards back, off ofbearings and remove projector cradle from SL220. (SeeFigure 15) Figure 15 PLACING SL220 INTO CEILING STRUCTURE 1. Orient SL220 so that th...

Page 12 - Replacing Projector Cradle; Installing RPA/RPM, Bracket and Projector

SL220 Installation Instructions 12 Replacing Projector Cradle 1. Slide front channels of projector cradle forward onto theSL220 bearings. (See Figure 18) Figure 18 2. Line up rear spacers with attachment holes on SL220 arms.(See Figure 19) 3. Tighten rear spacers. Figure 19 4. Reconnect grounding st...

Page 13 - Adjustments

Installation Instructions SL220 13 Adjustments 1. Adjust projector left or right by loosening the wing nuts onthe SL220 cross bracket. (See Figure 22) 2. Slide the SL220 cross bracket to the left or right as required. 3. Tighten wing nuts. (See Figure 22) Figure 22 4. Adjust projector forward or bac...

Page 14 - Replacing Ceiling Pan; OPERATING MODES; enable; Table 1: EQUIPMENT COOLDOWN; Equipment Cooldown; Minutes; disabled

SL220 Installation Instructions 14 CAUTION: KEEP SL220 OPEN WHILE PROJECTOR IS RUNNING OR IN COOLING MODE! Premature bulb failureor damage to electrical components may occur if lift closes. Replacing Ceiling Pan 1. Line up small peg on ceiling pan with hole in leg of projectorcradle. (See Figure 25)...

Page 15 - Fault Condition

Installation Instructions SL220 15 Fault Condition IMPORTANT ! : If the SL220 control system sees a fault condition it will stop the operation and a red light will flash onthe control board (visible through the control housing). For most faults: 1. Correct the problem. (Oftentimes, the cord routing ...

Page 17 - Remote Control Capabilities; Normal Operating Mode

Installation Instructions SL220 17 Remote Control Capabilities The remote control has a range of 20-30ft (6-9m), and ispowered by 2 AAA batteries that are accessed from the back ofthe remote. NOTE: If operation of the mount is required at a greater distance than remote control will allow, the mount ...

Page 18 - Table 4: WIRING TABLE

SL220 Installation Instructions 18 Table 4: WIRING TABLE

Page 20 - Europe; Asia Pacific

SL220 Installation Instructions Chief Manufacturing, a products divisionof Milestone AV Technologies 8820-002009 Rev02 2011 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 01/11 USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877....