Chief RSM A-D - Manuals - manualsarea.com

Page 2 - DISCLAIMER

RSM Elite Series Projector Mounts Installation Instructions 2 DISCLAIMER Milestone AV Technologies, and its affiliated corporations andsubsidiaries (collectively, "Milestone"), intend to make thismanual accurate and complete. However, Milestone makes noclaim that the information contained he...

Page 3 - DIMENSIONS

Installation Instructions RSM Elite Series Projector Mounts 3 DIMENSIONS 5.07 128.7 1.83 46.4 ROLL ADJUSTMENT POINT 4 1.61 40.9 1.61 40.9 2.18 55.4 4.37 110.9 .22 5.6 2.28 BOLT CIRCLE 57.8 THREADS ONTO 1-1/2' NPT YAW ADJUSTMENT POINT 10 PITCH ADJUSTMENT POINT 15 INTERFACE LOCKING SWITCH NOTE: CUSTOM...

Page 4 - LEGEND

RSM Elite Series Projector Mounts Installation Instructions 4 LEGEND Tighten Fastener Serrez les fixations Serrare il fissaggio Befestigungsteil festziehen Apretar elemento de fijación Bevestiging vastdraaien Apertar fixador Loosen Fastener Desserrez les fixations Allentare il fissaggio Befestigungs...

Page 6 - Rough Alignment of RSM; RSM INSTALLATION; Threaded Pipe Installation; This will require knowing the lens; MUST

RSM Elite Series Projector Mounts Installation Instructions 6 Rough Alignment of RSM 1. Turn RSM clockwise or counter-clockwise untilfront of mount is facing target. 2. Secure RSM to pipe by turning set screw until tight. CAUTION: DO NOT OVERTIGHTEN! Over tightening of setscrew can damage threads on...

Page 7 - INSTALLATION; Wood Stud Installation; Make sure mount is properly

Installation Instructions RSM Elite Series Projector Mounts 7 INSTALLATION 1a Ø 2.5mm (Ø 3/32”) 45mm(1-3/4”) Wood Stud Installation 1. Carefully determine required mounting location. IMPORTANT ! : This will require knowing the lens to screen distance. See projector specifications fordetails on deter...

Page 8 - Concrete Installation

RSM Elite Series Projector Mounts Installation Instructions 8 1b Ø 6.3mm (Ø 1/4”) 64mm(2-1/2”) Concrete Installation 1. Determine mounting location. WARNING: The RSM is designed to be mounted to a concrete ceiling with a minimum thickness of 8" and amaximum drywall covering of 5/8". WARNING:...

Page 9 - PROJECTOR INSTALLATION; Model RSM uses optional Chief; Install Interface Bracket; DO NOT fully tighten thumb; Threaded Rod Installation

Installation Instructions RSM Elite Series Projector Mounts 9 PROJECTOR INSTALLATION IMPORTANT ! : Model RSM uses optional Chief "SSM" Series interface brackets. (See Partsdrawing.) Install Interface Bracket 1. Partially thread thumb nuts onto Phillips screws untilscrew end is visible in top...

Page 10 - Install Projector With Interface Bracket

RSM Elite Series Projector Mounts Installation Instructions 10 Install Projector With Interface Bracket 1. Orient projector with interface bracket as shown infigure 2b at left. 2. Lift projector so that screws with thumb nuts arealigned with mounting slots in mount base. 3. Slide projector with moun...

Page 12 - Pitch Adjustment; ADJUSTMENTS; YAW Adjustment

Installation Instructions RSM Elite Series Projector Mounts 12 Pitch Adjustment 1. Loosen PITCH adjustment locking screw using a #2Phillips screwdriver. 2. Turn PITCH micro-adjustment screw right or leftusing a #2 Phillips screwdriver until image isproperly aligned on target. 3. Tighten PITCH adjust...

Page 13 - Roll Adjustment

RSM Elite Series Projector Mounts Installation Instructions 13 Roll Adjustment 1. Loosen ROLL adjustment locking screw using a#2 Phillips screwdriver. 2. Turn ROLL micro-adjustment screw right or leftusing a #2 Phillips screwdriver until image isproperly aligned on target. 3. Tighten ROLL adjustment...

Page 16 - Europe; Asia Pacific; RSM Elite Series Projector Mounts

USA/International A 6436 City West Parkway, Eden Prairie, MN 55344 P 800.582.6480 / 952.225.6000 F 877.894.6918 / 952.894.6918 Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Asia Pacific A Office No. 918 on 9/F, Shatin Galleria18-24 Shan Mei Street...