Chief PWC-2000 - Manuals

PWC-2000 Installation Instructions 6 TOOLS REQUIRED FOR INSTALLATION PARTS 7/32" (5.5mm) 1/2" (12.7mm) B (2) 1/4"-20 x 1/2" (6.4mm-20 x 12.7mm) C (4) 1/4"-20 x 1/2" (6.4mm-20 x 12.7mm) D (2) 1/4"-20 (6.4mm-20) A (1) F (1) 5/32" (6.4mm x 4.0mm) E (1) 1" x 6’ (25.4m...

Installation Instructions PWC-2000 7 INSTALLATION MOUNT INSTALLATION WARNING: Failure to provide adequate structural strength for this component can result in serious personal injury ordamage to equipment! It is the installer’s responsibility tomake sure the structure to which this component is atta...

PWC-2000 Installation Instructions 8 4. Carefully slide CPU between strap (E) and rear surface ofside plates (See Figure 5). Ensure the following: • Both loops of strap (E) are in front of the CPU; do not wrap strap (E) around back of CPU. • CPU is positioned so that cooling vents are notobstructed....

Installation Instructions PWC-2000 9 4. Rotate Q-Latch to the CLOSED position (See Figure 9). NOTE: If Q-Latch does not fully close, ensure mounting buttons are fully seated in the button openings. NOTE: OPTIONAL: A hole is provided in both the Q-Latch and the front plate to accommodate the insertio...

PWC-2000 Installation Instructions USA/International A 8401 Eagle Creek Parkway, Savage, MN 55378 P 800.582.6480 / 952.894.6280 F 877.894.6918 / 952.894.6918 Europe A Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands P 31 (0)20 5708923 F 31 (0)20 5708989 Asia Pacific A Room 30I, Block D, Lily YinDu ...